Abstract:Vibration-based Structural Health Monitoring (SHM) techniques are among the most common approaches for structural damage identification. The presence of damage in structures may be identified by monitoring the changes in dynamic behavior subject to external loading, and is typically performed by using experimental modal analysis (EMA) or operational modal analysis (OMA). These tools for SHM normally require a limited number of physically attached transducers (e.g. accelerometers) in order to record the response of the structure for further analysis. Signal conditioners, wires, wireless receivers and a data acquisition system (DAQ) are also typical components of traditional sensing systems used in vibration-based SHM. However, instrumentation of lightweight structures with contact sensors such as accelerometers may induce mass-loading effects, and for large-scale structures, the instrumentation is labor intensive and time consuming. Achieving high spatial measurement resolution for a large-scale structure is not always feasible while working with traditional contact sensors, and there is also the potential for a lack of reliability associated with fixed contact sensors in outliving the life-span of the host structure. Among the state-of-the-art non-contact measurements, digital video cameras are able to rapidly collect high-density spatial information from structures remotely. In this paper, the subtle motions from recorded video (i.e. a sequence of images) are extracted by means of Phase-based Motion Estimation (PME) and the extracted information is used to conduct damage identification on a 2.3-m long Skystream® wind turbine blade (WTB). The PME and phased-based motion magnification approach estimates the structural motion from the captured sequence of images for both a baseline and damaged test cases on a wind turbine blade. Operational deflection shapes of the test articles are also quantified and compared for the baseline and damaged states. In addition, having proper lighting while working with high-speed cameras can be an issue, therefore image enhancement and contrast manipulation has also been performed to enhance the raw images. Ultimately, the extracted resonant frequencies and operational deflection shapes are used to detect the presence of damage, demonstrating the feasibility of implementing non-contact video measurements to perform realistic structural damage detection.

Monitoring the Blades of a Wind Turbine by Using Videogrammetry

Structural Health Monitoring of Wind Turbine Blade Using Fiber Bragg Grating Sensors and Fiber Optic Rotary Joint

Condition Monitoring for Roller Bearings of Wind Turbines Based on Health Evaluation under Variable Operating States

Dynamic Strain Distribution Monitoring and Fatigue Damage Analysis on a 100 kW Wind Turbine Blade Based on Field Aerodynamic Measurements

Review on the Damage and Fault Diagnosis of Wind Turbine Blades in the Germination Stage

Dynamic Characteristics Monitoring of Large Wind Turbine Blades Based on Target-Free DSST Vision Algorithm and UAV

Research On Wind Turbine Blade Surface Damage Fault On-Line Monitoring And Diagnosis System

UAV based defect detection and fault diagnosis for static and rotating wind turbine blade: a review

Condition Monitoring of Wind Turbine Blades Using Active and Passive Thermography

Structural Health Monitoring of Composite Wind Turbine Blades: Challenges, Issues and Potential Solutions

Vibration-based damage detection in wind turbine blades using Phase-based Motion Estimation and motion magnification

Wind turbine condition monitoring by the approach of SCADA data analysis

Damage Detection for Rotating Blades Using Digital Image Correlation with an AC-SURF Matching Algorithm

Testing, inspecting and monitoring technologies for wind turbine blades: A survey

In-situ Condition Monitoring of Wind Turbine Blades: A Critical and Systematic Review of Techniques, Challenges, and Futures

Active vibration-based structural health monitoring system for wind turbine blade: Demonstration on an operating Vestas V27 wind turbine

Wind Turbine Geometrical and Operation Variables Reconstruction from Blade Acceleration Measurements

Damage detection and full surface characterization of a wind turbine blade using three-dimensional digital image correlation

Real-time Monitoring System for Multi-Mw Scale Wind Blades Using FBG Sensors

A novel transformer-enhanced and acoustic-based approach for wind turbine blade fault detection with integrated system implementation

Applicability Analysis of Inspection and Monitoring Technologies in Wind Turbine Towers