Abstract:In pursuit of commercial viability for carbon dioxide (CO2) electrolysis, this study investigates the operational challenges associated with membrane electrode assembly (MEA)-type CO2 electrolyzers, with a focus on CO2 loss into the solution phase through bicarbonate (HCO3 -) and carbonate (CO3 2-) ion formation. Utilizing a silver electrode known for selectively facilitating CO2 to CO conversion, the molar production of CO2, CO, and H2 is measured across a range of current densities from 0 to 600 mA/cm2, while maintaining a constant CO2 inlet flow rate of 58 mL/min. The dynamics of CO2 loss are monitored through measurements of pH changes in the electrolyte and carbon elemental balance analysis. Employing the concept of conservation of elemental carbon, a chemical reaction analysis is conducted, identifying the critical role of the hydroxide (OH-) ion. At lower current densities below 125 mA/cm2, where CO2 reduction predominates, it is observed that CO2 loss is proportional to current density, reaching up to 0.18 mmol/min, and directly correlates with the rate of OH- ion production, indicative of HCO3 -/CO3 2- ion formation. Conversely, at higher current densities above 450 mA/cm2, where hydrogen evolution is the dominant process, CO2 loss is shown to decouple from the OH- ion production rate with a constant limit condition of 0.12 mmol/min, regardless of the current density. This suggests that electrolyte-induced cathode flooding restricts CO2 access to cathode sites. Additionally, pH change in the electrolyte during the electrolysis further infers differing ion populations in the CO2 reduction and hydrogen evolution regimes, and their movement across the membrane. Continued monitoring of the pH change after the cessation of electricity offers insights into the accumulation of HCO3 -/CO3 2- ion at the cathode, influencing salt formation.

Electrolytic Conversion of Bicarbonate into CO in a Flow Cell

A cascade of in situ conversion of bicarbonate to CO2 and CO2 electroreduction in a flow cell with a Ni-N-S catalyst

Electrolytic conversion of carbon capture solutions containing carbonic anhydrase

CO2-mediated Bicarbonate Conversion to Concentrated Formate in a CEM-based Electrolyzer

CO 2 -mediated bicarbonate conversion to concentrated formate in a CEM-based electrolyzer

Conversion of Reactive Carbon Solutions into CO at Low Voltage and High Carbon Efficiency

Bicarbonate Electroreduction to Multicarbon Products Enabled by Cu/Ag Bilayer Electrodes and Tailored Microenviroments

Electro-Conversion of Carbon Dioxide to Valuable Chemicals in a Membrane Electrode Assembly

Enhancing Local CO 2 Concentration via Covalent Interaction for the Conversion of Carbonate to CO

Amine-Functionalized Metal-Free Nanocarbon to Boost Selective CO2 Electroreduction to CO in a Flow Cell.

Bipolar membrane electrolyzers enable high single-pass CO2 electroreduction to multicarbon products

Separation and Conversion of CO2 Reduction Products into High-Concentration Formic Acid Using Bipolar Membrane Electrodialysis

CO2 electroreduction to multicarbon products from carbonate capture liquid

CO2 Loss into Solution: An Experimental Investigation of CO2 Electrolysis with a Membrane Electrode Assembly Cell

Durable CO2 conversion in the proton-exchange membrane system

Electrocatalytic CO2 Reduction to C2+ Products in Flow Cells

Tailoring Microenvironment in Bilayer Electrode with Copper and Silver Nanocatalysts for Bicarbonate Electroreduction to Multicarbon Products

Ethylene Production from Carbonate Using a Bipolar Membrane Electrolysis System

Iodine‐Mediated C─C Coupling in Neutral Flow Cell for Electrochemical CO2 Reduction

Continuous Carbon Dioxide Electroreduction to Concentrated Multi-carbon Products Using a Membrane Electrode Assembly

Direct air capture of CO2 in a hybrid electrochemical flow cell