Abstract:The human lung comprises about 300 million alveoli which are located on bronchioles between the 17th to 24th generations of the acinar tree, with a progressively higher population density in the deeper branches (lower acini). The alveolar size and aspect ratio change with generation number. Due to successive bifurcation, the flow velocity magnitude also decreases as the bronchiole diameter decreases from the upper to lower acini. As a result, fluid dynamic parameters such as Reynolds (Re) and Womersley (α) numbers progressively decrease with increasing generation number. In order to characterize alveolar flow patterns and inhaled particle transport during synchronous ventilation, we have conducted measurements for a range of dimensionless parameters physiologically relevant to the upper acini. Acinar airflow patterns were measured using a simplified in vitro alveolar model consisting of a single transparent elastic truncated sphere (representing the alveolus) mounted over a circular hole on the side of a rigid circular tube (representing the bronchiole). The model alveolus was capable of expanding and contracting in-phase with the oscillatory flow through the bronchiole thereby simulating synchronous ventilation. Realistic breathing conditions were achieved by exercising the model over a range of progressively varying geometric and dynamic parameters to simulate the environment within several generations of the acinar tree. Particle image velocimetry was used to measure the resulting flow patterns. Next, we used the measured flow fields to calculate particle trajectories to obtain particle transport and deposition statistics for massless and finite-size particles under the influence of flow advection and gravity. Our study shows that the geometric parameters (β and ΔV/V) primarily affect the velocity magnitudes, whereas the dynamic parameters (Re and α) distort the flow symmetry while also altering the velocity magnitudes. Consequently, the dynamic parameters have a greater influence on the particle trajectories and deposition statistics compared to the geometric parameters. The results from this study can benefit pulmonary research into the risk assessment of toxicological inhaled aerosols, and the pharmaceutical industry by providing better insight into the flow patterns and particle transport of inhalable therapeutics in the acini.

Microparticle Transport and Sedimentation in a Rhythmically Expanding Alveolar Chip

Investigation on Microparticle Transport and Deposition Mechanics in Rhythmically Expanding Alveolar Chip

Microflow in a rhythmically expanding alveolar chip with dynamic similarity

Microflows in Two-Generation Alveolar Cells at an Acinar Bifurcation.

Recent Advances in the Understanding of Alveolar Flow

Flow and Particle Dispersion in Lung Acini: Effect of Geometric and Dynamic Parameters During Synchronous Ventilation

CFD–DEM simulation of particle transport and deposition in pulmonary airway

Research on the deposition efficiency of nanoparticles in human airways

Flow Topology and Mixing in Alveolar Edema: Unsteady Flow in Interconnected Cavities with Moving Walls

Study on Deposition Characteristics of Microparticles in Terminal Pulmonary Acini by IB–LBM

A Microfluidic Lung-on-a-chip Based on Biomimetic Hydrogel Membrane

Numerical simulation of unsteady magneto hydrodynamic flow of nanoparticle deposition in the porous alveolar ducts

Experimental-Computational Study of Fibrous Particle Transport and Deposition in A Bifurcating Lung Model

Morphologically Reconfigurable Magnetic Micropillar Arrays Using Acoustic Streaming for Particle Capture and Droplet Manipulation

Micron particle deposition in a tracheobronchial airway model under different breathing conditions

Development of alveolar-capillary-exchange (ACE) chip and its application for assessment of PM2.5-induced toxicity

Advances of microfluidic lung chips for assessing atmospheric pollutants exposure

Development of multi-generation lower respiratory tract model and insights into the transport and deposition characteristics of inhalable particles

Numerical Simulation of the Effect of Respiratory Cycle on Inhalable Particle Deposition in Alveolus

Effects of airway deformation and alveolar pores on particle deposition in the lungs

Numerical Investigation of Particle Deposition in a Triple Bifurcation Airway Due to Gravitational Sedimentation and Inertial Impaction