Abstract:Since the launch of Sputnik in 1958, thousands of satellites have been launched by governments and commercial entities for a wide range of purposes. Once a satellite has completed its primary mission, most operators de-orbit or move the satellite into a graveyard orbit as to avoid collisions with active satellites. However, some spacecraft do not have any residual propellant. Other satellites suffer failures and become hazards themselves. Non-operational satellites in orbit have become an increasing collision risk for operational satellites and this problem will only become worse as the number of satellites launched every year increases. Although finding ways to clean up orbital debris is important, near term solutions is needed to mitigate the risk of debris colliding with an active satellite. Traditionally, debris avoidance is performed by operators on the ground who calculate debris conjunctions and analyze the risk of moving the satellite. This paper proposes an alternate solution where the process of analyzing and avoiding orbital debris can be done autonomously by the satellite without human intervention. This provides advantages such as reducing the number of operators needed to maintain a satellite or a large constipation of satellites thus reducing operating costs. With the increased amount of processing power on modern satellites, this system is possible with current technology. The system would first collect a database of two line element's (TLE) for each piece of orbital debris. The satellite will then perform a conjunction analysis against each piece of debris and the satellites predicted future position. The satellite will re-assess these probabilities at set increments as it gets closer to the conjunction, or when the debris database is updated. The satellite operator will be able to set the collision probability threshold. If this threshold is exceeded, the satellite will calculate the most efficient maneuver based off the required delta v, time to the conjunction and staying in its operational orbit. The system will also attempt to combine any required avoidance burns with a normal orbit maintenance burn to minimize fuel consumption. When an appropriate avoidance burn is being considered, the system will check for debris conjunctions in this new orbit. If there is no danger of a collision, the maneuver will be executed.

Mission Planning of Safe Approach and Emergency Evacuation to Large Slow-Rotating Space Debris

Autonomous obstacle avoidance strategies in the mission of large space debris removal using potential function

Mission Planning on Autonomous Avoidance for Spacecraft Confronting Orbital Debris

Trajectory Planning and Control of Spacecraft Avoiding Dynamic Debris Swarm

A Population Dynamics Approach to the Distribution of Space Debris in Low Earth Orbit

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

Multiple Space Debris Collecting Mission - Debris selection and Trajectory optimization

Review of path planning in prospective multi-target active debris removal missions in low earth orbits

Mission Planning for Active Removal of Multiple Space Debris in Low Earth Orbit

Dynamic modeling and control strategy for tethered satellite systems in orbital debris management

Spacecraft Autonomous Orbit Planning via Artificial Potential Field for Debris Threat Avoidance

Active Debris Removal Mission Planning Method Based on Machine Learning

Multiple Space Debris Collecting Mission -- Optimal Mission Planning

Multi-objective Optimal Preliminary Planning of Multi-Debris Active Removal Mission in LEO

An autonomous satellite debris avoidance system

A Trajectory Planning Method For Rapid Capturing An Unknown Space Tumbling Target

Model Predictive Control to Autonomously Approach a Failed Spacecraft

Capture Dynamics and Control of a Flexible Net for Space Debris Removal

Trajectory planning for complex shaped spacecraft proximity based on critical safety curve and disturbed fluid

Dynamics of space debris removal: A review

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris