Improvement in separation performance of PEI-based nanofiltration membranes by using L-cysteine functionalized POSS-TiO2 composite nanoparticles for removal of heavy metal ion
Samaneh Bandehali,Fahime Parvizian,Abdolreza Moghadassi,Jiangnan Shen,Sayed Mohsen Hosseini
DOI: https://doi.org/10.1007/s11814-020-0535-0
IF: 2.7
2020-06-30
Korean Journal of Chemical Engineering
Abstract:L-cysteine as an amino acid was used for the modification of glycidyl POSS in the synthesis of L-cysteine functionalized POSS, including carboxyl, hydroxyl, and diamine groups. Then, the synthesized nanoparticles were applied to fabrication of L-cysteine POSS-TiO<sub>2</sub> composite nanoparticles. NF membranes were prepared from the incorporation of different concentrations of the synthesized composite nanoparticles into the polyether-imide (PEI) as the membrane matrix. The prepared membranes were characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM) and atomic force microscope (AFM). Moreover, the separation performance of the NF membranes was examined by pure water flux (PWF) and the separation of Na<sub>2</sub>SO<sub>4</sub>, Pb(NO<sub>3</sub>)<sub>2</sub>, Cr(NO<sub>3</sub>)<sub>2</sub> and Cu(NO<sub>3</sub>)<sub>2</sub> aqueous solutions. The results showed the increase of pure water flux due to present hydrophilic groups on the membrane surface. The highest pure water flux obtained was 22.03 L/m<sup>2</sup>h in 1 wt% of nanoparticles. Furthermore, the rejection of Na<sub>2</sub>SO<sub>4</sub> and Pb(NO<sub>3</sub>)<sub>2</sub>, CrSO<sub>4</sub>, and Cu(NO<sub>3</sub>)<sub>2</sub> improved to 78%, 64%, 67% and 66% that increased 11%, 33%, and 22%, and 39% compared with the pristine PEI membrane, respectively. Finally, the best FRR% (81%) was obtained for 0.1 wt% of the composite nanoparticles (M3).
engineering, chemical,chemistry, multidisciplinary