Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

Primary Aberration Optimization for Double-Plane Symmetric Beam Shaping Systems Using a Pair of Curved Reference Surfaces.

Design Beam Shapers with Double Freeform Surfaces to Form a Desired Wavefront with Prescribed Illumination Pattern by Solving a Monge-Ampère Type Equation

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Simplified Analytical Method for an Anamorphic Refractive Shaping System of Laser Beams with a Large Aspect Ratio.

Beam shaping system design using double freeform optical surfaces.

Double Freeform Surfaces Design for Laser Beam Shaping with Monge–Ampère Equation Method

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Compensation of Low Order Aberrations with Reflective Beam Shaping System

Doublet liquid variable-focus lens for spherical aberration correction

A Way for Measuring the Relationship Between DM Surface and Wave-Front Aberrations in a Beam Rotate-90° Laser System

Aberration Properties of Off-Axis Freeform Surface Optical System

Design of tilted and decentered anamorphic optical system based on nodal aberration control

Wavefront Aberrations Control for Complex Optical Systems by Compensation-Surface

Double-deformable-mirror Adaptive Optics System for Laser Beam Cleanup Using Blind Optimization

PWC Primary Aberration Expression of Thin Lens System Including Diffractive Optical Elements

Correction of Aberration-Induced Phase Errors in Phase Measuring Deflectometry

Wavefront Pre-Compensation for Thermal Deformations in a High Power Inner Optical System

Actively Compensation of Low Order Aberrations by Refractive Shaping System for High Power Slab Lasers

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System