Abstract:Purpose The purpose of this paper is to estimate the deformation of soft manipulators caused by obstacles accurately and the contact force and workspace can be also predicted. Design/methodology/approach The continuum deformation of the backbone of the soft manipulator under contact is regarded as two constant curvature arcs and the curvatures are different according to the fluid pressure and obstacle location based on piecewise constant curvature framework. Then, this study introduces introduce the moment balance and energy conservation equation to describe the static relationship between driving moment, elastic moment and contact moment. Finally, simulation and experiments are carried out to verify the accuracy of the proposed model. Findings For rigid manipulators, environmental contact except for the manipulated object was usually considered as a “collision” which should be avoided. For soft manipulators, an environment is an important tool for achieving manipulation goals and it might even be considered to be a part of the soft manipulator’s end-effector in some specified situations. Research limitations/implications There are also some limitations to the presented study. Although this paper has made progress in the static modeling under environmental contact, some practical factors still limit the further application of the model, such as the detection accuracy of the environment location and the deformation of the contact surface. Originality/value Based on the proposed kinematic model, the bending deformation with environmental contact is discussed in simulations and has been experimentally verified. The comparison results show the correctness and accuracy of the presented SCC model, which can be applied to predict the slender deformation under environmental contact without knowing the contact force.

Kinematics Modeling of Soft Manipulator Interacting with Environment Using Segmented Variable Curvature Method

Static Modeling and Analysis of Soft Manipulator Considering Environment Contact Based on Segmented Constant Curvature Method.

Dynamical Modeling and Control of Soft Robots with Non-constant Curvature Deformation

Kinematic Modeling and Control of a Soft Robotic Arm with Non-constant Curvature Deformation

Research On Kinematics Modeling Of Soft Manipulator

Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots

The Modeling and Visual Control Simulation of Articulated Serpentine Manipulator

Simplified Dynamical Model and Experimental Verification of an Underwater Hydraulic Soft Robotic Arm

Piecewise Affine Curvature model: a reduced-order model for soft robot-environment interaction beyond PCC

Cosserat-Rod Based Dynamic Modeling of Soft Slender Robot Interacting with Environment

Modeling and Experimental Verification of a Continuous Curvature-based Soft Growing Manipulator

Inverse Kinematics Solving of a Novel Soft Manipulator with Vision and IMU Data

Unified Kinematic and Dynamical Modeling of a Soft Robotic Arm by a Piecewise Universal Joint Model

Three-Dimensional Dynamics for Cable-Driven Soft Manipulator

A Variable Curvature Model for Multi-Backbone Continuum Robots to Account for Inter-Segment Coupling and External Disturbance.

Kinetostatics Modeling and Analysis of a Spherical Parallel Continuum Manipulator

Visual Servoing of Soft Robot Manipulator in Constrained Environments with an Adaptive Controller

Static-to-kinematic Modeling and Experimental Validation of Tendon-Driven Quasi Continuum Manipulators with Nonconstant Subsegment Stiffness

Shape deformation analysis and dynamic modeling of a switchable rigid-continuum robot

Modeling and Analysis of Soft Manipulator Considering Coupling Effect Between Actuators

Soft Contact Simulation and Manipulation Learning of Deformable Objects with Vision-based Tactile Sensor