Abstract:Abstract Considering the internal collision vibration-driven and external discontinuous resistance tolerance fusion conditions, the non-smooth dynamics characteristics of collision and stick-slip vibration-driven system are studied and experimented. Unilateral collision behavior of internal oscillators under the action of a periodic force to achieve system motion in different directions, it overcome the external Coulomb friction force and drives the system to drive in steady state under a certain direction. The kinematic and dynamic models of the system are established, and the collision and stick-slip driving motion of the system is analyzed based on the theory of non-smooth dynamics. The voice coil motor is used as the internal driving element, and the vibration driving test platform is designed and fabricated, and the driving characteristics of the system are studied experimentally. The study shows that there are three forms of movement in the steady state driving motion of the system: sticking motion, forward motion and backward motion; sine wave excitation and triangular wave excitation as input excitation have the characteristic of smoother operation with less shock; external excitation parameter regulation can change the system speed and direction of the movement; excitation frequency as a regulation parameter has the advantages of speed bandwidth, continuity, and so on; the system average driving speed in the numerical simulation and experimental test with the system average driving speed in numerical simulation and experimental test has the same rule of change, the backward motion is located in the low-frequency region, the forward motion is located in the high-frequency region, the friction coefficient and the excitation amplitude affect the size of driving speed. The results and methods of this study provide a corresponding theoretical basis for the design and parameter optimization of vibration-driven robots.

Elastodynamic Analysis of Synergistic Oscillation System Driven by Double Servomotors for Continuous Casting Mold

Dynamic Characteristics of the Over-Actuated Cutterhead Driving System in Tunnel Machine

Synchronous Control Model and Oscillation Principle of Swing Crank Type for Continuous Casting Mold

Research and Development of the Online Vibration Monitoring System for Continuous Casting Mold

The coupling dynamic characteristics and vibration suppression of a double-beam structure with two linear oscillators installed separately

Simulation of master-slave optimal synchronous control of double motors based on Simulink

Advanced Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics.

Application of the Electrohydraulic Servo System on the Mold of the Continuecasting Machine

NUMERICAL SIMULATION OF SURFACE OSCILLATION IN CONTINUOUS CASTING MOLD

Integrated Modeling and Analysis of Ball Screw Feed System and Milling Process with Consideration of Multi-Excitation Effect

Steel/Slag Interface Behavior under Multifunction Electromagnetic Driving in a Continuous Casting Slab Mold

Nonlinear vibration response characteristics of a dual-rotor-bearing system with squeeze film damper

Study on the Consumption Mechanism and Lubrication of Mold Powder Based on Non-Sinusoidal Oscillation Mode

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Dynamics simulation on double-roller clamping spinning device driven by multi-motor

Modeling and Vibration Decoupling Control of Multi-Axial Shaking Table

Stick-Slip Mechanism Study Of Cnc Heavy-Duty Horizontal Lathe Feed Systems Based On Dynamics

On $$\Frac{1}{2}$$-Dof Active Dampers to Suppress Multistability Vibration of a $$2$$-DOF Rotor Model Subjected to Simultaneous Multiparametric and External Harmonic Excitations

Modeling, driving characterization of collision and stick-slip vibration-driven system

Dynamic Analysis of an Unbalanced Rotor-Water Pump-Bearing System Considering Varying Compliance Effect and Localized Defects on Bearing Races

Theoretical, numerical and experimental studies on multi-cycle synchronization of two pairs of reversed rotating exciters