Metastable Phase Formation and Its Transformation in Highly Undercooled Ni75B25 Alloy

Liu L. J.,Lu S. Y.,Qin Q. Y.,Yang L.,Li J. F.

DOI: https://doi.org/10.1007/s11661-021-06573-2

2022-01-01

Metallurgical and Materials Transactions A

Abstract:Ni75B25 alloy was solidified at various undercooling. The formation and subsequent transformation of metastable Ni23B6 phase were clearly identified. If undercooling prior to nucleation is less than a critical value of 240 K (240 °C), the alloy solidifies completely into Ni3B phase. At larger undercooling, metastable Ni23B6 phase primarily forms in the melt but then is decomposed into α-Ni and Ni3B through a eutectoid reaction. The decomposition simultaneously triggers the rapid solidification of residual liquid, due to which a second temperature recalescence occurs. The α-Ni/Ni3B eutectoid is partially remelted if temperature exceeds the eutectic temperature during the second recalescence. Then, residual Ni3B grows into coarse round grains while the remaining liquid re-solidifies into α-Ni/Ni3B eutectic structure in the remelted region. In the case that the eutectic temperature is not reached, the eutectoid product with dot α-Ni distributing in Ni3B matrix is retained in the solidification structure. A longer delay time between the two temperature recalescence events means less residual liquid, lower recalescence temperature and thus depressed remelting. The formation competition between Ni3B and Ni23B6 phases in the alloy melt is nucleation controlled. The heterogeneous site in Ni75B25 alloy melt is a better nucleation substrate for Ni23B6 phase than for Ni3B phase.