Abstract:Precise size control and general synthesis of ultrafine noble metal-based catalysts are very important in electrochemical energy conversion technologies. Herein, we develop the ultrafine MCu (M = Pt, Au, and Pd) alloy nanoparticles anchored on the porous N-doped carbon nanofibers (MCu/p-NCNFs) by the electroless deposition method. The as-prepared MCu alloy nanoparticles possess ultrafine particles sizes (<10 nm) and are uniformly anchored on p-NCNFs, which are derived from electrospun polyacrylonitrile (PAN) nanofibers. Owing to the desired composition and structure, the as-prepared PtCu/p-NCNFs with an ultrafine alloy size (≈3.5 nm) exhibits significantly enhanced electrocatalytic activity and stability toward methanol electrooxidation as well as the outstanding CO antipoisoning ability. This work offers a new general strategy for the fabrication of ultrafine alloy nanoparticles on a porous nitrogen-doped carbon support as highly efficient electrocatalysts for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jpcc.0c03460?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jpcc.0c03460</a>.Schematic illustration for the fabrication of MCu/p-NCNFs; SEM and TEM images with low magnification of as-prepared Cu/p-NCNFs; TEM image with high magnification of as-prepared Cu/p-NCNFs; SEM image with high magnification of as-prepared PtCu/p-NCNFs; CVs of the p-NCNFs in 0.5 M H2SO4 aqueous solution at 10 mV s–1; TEM image and size distribution of PtCu NPs; TEM images of PtCu/p-NCNFs synthesized using 3.5, 5, and 7 mM H2PtCl6 aqueous solution; XRD patterns of PtCu/p-NCNFs synthesized using different concentrations of H2PtCl6 aqueous solution and different time of electroless deposition; TEM images of PtCu/p-NCNFs synthesized by 5, 20, and 60 min electroless deposition; schematic illustration of metal nanoparticle deposition on carbon nanotubes via the substrate-enhanced electroless deposition process in previous studies; N2 adsorption–desorption isotherm and pore size distribution curve, survey XPS spectra, and C 1s XPS spectra of Cu/p-NCNFs and PtCu/p-NCNFs; CV curves in 0.5 M H2SO4 + 1 M CH3OH at 50 mV s–1; CV curves of PtCu/p-NCNFs and commercial Pt/C from the 1st to 200th cycle; TEM images of the PtCu/p-NCNFs and PtCu NPs after 200 cycles; histograms for size distribution of alloy nanoparticles in as-prepared PdCu/p-NCNFs and AuCu/p-NCNFs; EDS spectra of PdCu/p-NCNFs and AuCu/p-NCNFs; comparisons of the experimental parameters of as-reported research studies that use the SEED method to fabricate the MNPs/C system; and composition of different PtCu/p-NCNFs samples based on the ICP-AES analysis (<a class="ext-link" href="/doi/suppl/10.1021/acs.jpcc.0c03460/suppl_file/jp0c03460_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nitrogen Doped Carbon-Distributed and Nitrogen-Stabilized Ultrafine FeM (M = Pd, Pt, Au) Nanoclusters for Doxorubicin Detoxification

Highly Efficient Encapsulation of Doxorubicin Hydrochloride in Metal-Organic Frameworks for Synergistic Chemotherapy and Chemodynamic Therapy

Modification of Pd Nanoparticles with Lower Work Function Elements for Enhanced Formic Acid Dehydrogenation and Trichloroethylene Dechlorination

Catalytic detoxification of mitoxantrone by graphitic carbon nitride (g-C3N4) supported Fe/Pd bimetallic nanoparticles

Biodegradable hollow mesoporous bimetallic nanoreactors to boost chemodynamic therapy

Fe-Doped Α-Mno2 Nanorods for the Catalytic Removal of NOx and Chlorobenzene: the Relationship Between Lattice Distortion and Catalytic Redox Properties.

Modulating Adsorption of Active Hydrogen Atoms on Palladium Nanoparticles: Doping Ruthenium into Metal–Organic Frameworks for Efficient Electrocatalytic Hydrodechlorination

Construction of Fe/N/C Nano-Clusters Anchored on Porous Diatomite for Efficient Removal of Norfloxacin Via the Adsorption-Pms Activation

Highly dispersed Co/Fe bimetal in carbonaceous cages as heterogeneous Fenton nanocatalysts for enhanced sulfamethoxazole degradation

Ultra-Sensitive Iron-Doped Palladium Nanocrystals with Enhanced Hydroxyl Radical Generation for Chemo-/Chemodynamic Nanotherapy

Tailored Design of MXene-like 2D MOF Derived Carbon/fe3o4 Fenton-like Catalysts Towards Effective Removal of Contaminants Via Size-Exclusion Effect

Interface-Engineered Mesoporous FeB with Programmed Drug Release for Synergistic Cancer Theranostics

Tailoring Fe0 Nanoparticles Via Lattice Engineering for Environmental Remediation.

Synthetic Control Of Feptm Nanorods (M = Cu, Ni) To Enhance The Oxygen Reduction Reaction

Amorphous Cu/Fe nanoparticles with tandem intracellular and extracellular electron capacity for enhancing denitrification performance and recovery of co-contaminant suppressed denitrification

Millisecond Self-Heating and Quenching Synthesis of Fe/carbon Nanocomposite for Superior Reductive Remediation

General Synthesis of Ultrafine Cu-Based Alloy Nanoparticles Anchored on Porous N-Doped Carbon Nanofibers for Enhanced Electrocatalytic Performance

Octahedron of zero-valent and mono-valent copper anchored on nitrogen doping porous carbon to enhance heterogeneous electro-Fenton like activity

The Enhancement of Nitrate Reduction by Supported Pd–Fe Nanoscale Particle

Assembled Fe3O4 nanoparticles on ZnAl LDH nanosheets as a biocompatible drug delivery vehicle for pH-responsive drug release and enhanced anticancer activity

Nano-Fe0 embedded in N-doped carbon architectures for enhanced oxidation of aqueous contaminants