A Near-Infrared Polymer Enables over 50% Transmittance in Semi-Transparent Organic Solar Cells

Qingyun Wei,Yi Zhang,Tong Shan,Hongliang Zhong

DOI: https://doi.org/10.1039/d2tc00025c

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:A semi-transparent organic solar cell achieves an over 50% average visible transmittance, which is attributed to the rational design of the polymer donor with extended absorption in the near-infrared region.

What problem does this paper attempt to address?

Light Management for Fullerene-Based Semitransparent Polymer Solar Cells with a Distributed Bragg Reflector

Tianyu Liu,Chenying Yang,Ziyan Jia,Weidong Shen,Yang Michael Yang

DOI: https://doi.org/10.1021/acsapm.3c01184

2023-01-01

ACS Applied Polymer Materials

Abstract:Semitransparent organic photovoltaic devices (ST-OPVs) are a type of organic solar cells that can collect solar energy while maintaining transparency in the visible band. Their transparency allows ST-OPVs to be integrated into the exteriors of buildings, serving as solar windows. However, these devices often face the challenge of balancing high transparency with optimal efficiency. To mitigate this issue, we propose ST-OPVs constructed with a distributed Bragg reflector structure to improve the harvest of near-infrared energy, resulting in an increase in power conversion efficiency and near-infrared external quantum efficiency while maintaining considerable visible transmission. Although nonfullerene-based OPVs show much higher efficiency than conventional fullerene-based ones, they usually absorb visible light more intensively. ; ; Here, we utilized a near-infrared (NIR) polymer donor PDTP-DFBT along with fullerene derivatives as an active layer in the ST-OPVs. Our devices demonstrated a notable light utilization efficiency (LUE) of 2.62% and an average visible transmission (AVT) of 51.6% for the PDTP-DFBT:PC60BM ST-OPVs. Similarly, the PDTP-DFBT:PC70BM ST-OPVs achieved an LUE of 2.35% while maintaining an AVT of 39%. Additionally, our ST-OPVs exhibit perfect color fidelity. Our research provides a viable solution for the utilization of solar energy in visibly transparent scenarios.
Wide Bandgap Polymer with Narrow Photon Harvesting in Visible Light Range Enables Efficient Semitransparent Organic Photovoltaics

Chunyu Xu,Ke Jin,Zuo Xiao,Zijin Zhao,Xiaoling Ma,Xuelin Wang,Junming Li,Wenjing Xu,Shuping Zhang,Liming Ding,Fujun Zhang

DOI: https://doi.org/10.1002/adfm.202107934

IF: 19

2021-09-21

Advanced Functional Materials

Abstract:Wide bandgap polymer D18 with narrow photon harvesting in visible light range and small molecule N3 with near-infrared photon harvesting are adopted for building semitransparent organic photovoltaics (OPVs). To find out the optimal D18:N3 weight ratio for semitransparent OPVs, series of opaque OPVs are built with a varied D18:N3 weight ratio. The power conversion efficiency (PCE) and fill factor can be maintained over 16% and 77% in the D18:N3 (0.7:1.6, wt/wt) based opaque OPVs, respectively. The average visible transmittance (AVT) of the corresponding blend films can be achieved over 50%, demonstrating the great potential in fabricating efficient semitransparent OPVs. The semitransparent OPVs based on D18:N3 (0.7:1.6, wt/wt) are fabricated by using 1 nm Au/(10, 15, 20 nm) Ag as cathode. The thickness of Ag layers is varied to balance the optical properties and electrical properties of semitransparent top electrode. The semitransparent OPVs with 10 nm Ag achieve the highest light utilization efficiency of 2.90% with a PCE of 12.91% and an AVT of 22.49%, which should be among the best performance of reported semitransparent OPVs. This work demonstrates that the wide bandgap polymer donor with narrow photon harvesting in visible light range has great potential in preparing efficient semitransparent OPVs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Synthesizing near‐ultraviolet absorbed donor for transparent polymer solar cells

Zurong Du,Qifan Xue,Kai Zhang,Zhicheng Hu,Zhisheng Zhou,Jianhua Jing,Lin Shao,Ning Li,Fei Huang

DOI: https://doi.org/10.1002/solr.202200527

IF: 9.1726

2022-08-04

Solar RRL

Abstract:Wavelength‐selective transparent polymer solar cells (T‐PSCs) have huge developing potential in power‐window applications for their excellent visible transparency and high color rendering index. However, the main research interest of devices until now has focused on near‐infrared absorbers for both polymer donor and non‐fullerene small molecule acceptor (NF‐SMA) due to the lack of appropriate near‐ultraviolet absorbers. In this work, we report the successful implementation of the T‐PSC devices based on a novel kind of near‐ultraviolet polymer donors combined with a near‐infrared NF‐SMA Y6. The reported polymer donors are "D1‐D2" typed copolymers employing fluorene and triphenylamine as the two electron‐donating units. The best‐performed one not only shows ultra‐wide optical bandgap (2.87 eV), leading to high average visible transmittance (AVT) of 96.8% in the thin film, but also has efficient hole mobility (about 5.0×10‐6 cm2 V‐1 s‐1), well matched frontier molecular orbital energy levels and good miscibility with Y6. As a result, the T‐PSC device is obtained with an AVT of 51.4% and PCE of 3.15%, along with a favorable light utilization efficiency (LUE) of 1.62% and a CRI of 91.6. As far as we know, this is the first example that uses near‐ultraviolet absorbed polymer donor to achieve high efficiency T‐PSC devices. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
Infrared-transparent polymer solar cells

Xinyuan Xia,Shanshan Wang,Yi Jia,Zuqiang BIAN,Dehai Wu,Luhui Zhang,Anyuan Cao,Chunhui Huang

DOI: https://doi.org/10.1039/c0jm02406f

2010-01-01

Journal of Materials Chemistry

Abstract:Transparent solar cells are very useful in making transparent electrical power supplies and tandem devices. We report the fabrication of semi-transparent polymer solar cells by replacing conventional metal electrode with a carbon nanotube film. The solar cells can be illuminated at both front and back sides, with power conversion efficiencies (up to 2.5%) comparable to cells using metal electrodes. The solar cells are highly transparent in near-infrared region, with an optical transmittance of nearly 80% in the range of 670 nm to 1.2 mm, and maintain a transmittance of above 60% through 1.2 to 2.5 mm. We further constructed a tandem structure with two subcells operating separately, in which the back cell receives infrared light transmitted through the front cell. Our infrared-transparent solar cells possess multiple functions such as serving as a light filter to drive a CdSe nanobelt photo-sensor with enhanced wavelength selectivity.
Design of UV-Absorbing Donor Molecules for Nearly Imperceptible Organic Solar Cells

Melissa L. Ball,Quinn Burlingame,Hannah L. Smith,Tianran Liu,Sean R. Parkin,Antoine Kahn,Yueh-Lin Loo

DOI: https://doi.org/10.1021/acsenergylett.1c02244

IF: 22

2022-01-01

ACS Energy Letters

Abstract:Transparent photovoltaic cells are an emerging technology that can provide point-of-use electricity generation for building-integrated applications. While most transparent solar cells to date target absorption of the photon-rich near-infrared portion of the solar spectrum, these devices compromise color neutrality and transparency because of parasitic absorption of long-wavelength visible light. One solution to eliminate parasitic absorption is to employ materials that absorb near-ultraviolet light with sharper absorption cutoffs. Herein, we demonstrate organic donor materials based on N,N'-diaryl-diamines that incorporate a series of aryl linkers to systematically tune their absorption profiles. When paired with acceptor 4,6-bis(3,5-di-4-pyridinylphenyl)-2-methylpyrimidine in an inverted architecture with an indium tin oxide top electrode and an organic optical outcoupling layer, the three best-performing transparent solar cells exhibit average photopic-response-weighted transmittances of 80.3-82.0% and color-rendering indices of 95.0-97.1, both of which are records for organic photovoltaics, with power-conversion efficiencies of 0.43-0.70%.
Rational Design of Near‐Infrared Polymer Acceptors Using Steric Hindrance Strategy for High‐Performance Organic Solar Cells

Xiaoming Li,Lingyu Chen,Lingxian Meng,Chen Zhang,Xiaopeng Duan,Yuheng Man,Min Hun Jee,Lili Han,Yiyang Pan,Donghui Wei,Xiangjian Wan,Han Young Woo,Yongsheng Chen,Yanming Sun

DOI: https://doi.org/10.1002/adfm.202316090

IF: 19

2024-01-31

Advanced Functional Materials

Abstract:Three polymer acceptors named PTz‐Ph, PTz‐Me, and PTz‐H are synthesized by substituting the Phenyl, Methyl, and Hydrogen in the beta position of the thiophene unit based on small molecules. PTz‐H‐based device achieves a record‐high efficiency of 18.16% and the highest photocurrent for all‐polymer solar cells reported in the literature thus far. The unprecedented development of all‐polymer solar cells (all‐PSCs) is hindered by their low short‐circuit current density (Jsc), mainly due to the absence of near‐infrared (NIR) polymer acceptor materials. To tackle this challenge, a molecular design principle is proposed, which involves the regulation of steric hindrance on the fused‐ring backbone to obtain NIR polymer acceptors. Accordingly, three acceptors named PTz‐Ph, PTz‐Me, and PTz‐H are synthesized by substituting the Phenyl, Methyl, and Hydrogen in the beta position of the thiophene unit based on fused‐ring molecules. Different from the necessity of steric hindrance of small molecule acceptors in achieving an outstanding performance, polymer acceptor PTz‐H without steric hindrance‐substitution achieves a record‐high efficiency for the benzotriazole‐based all‐PSCs. Then, introducing PTz‐H into the binary PBDB‐T:PTz‐BO system, the ternary all‐PSC exhibits a splendid efficiency of 18.16%, which has surpassed the efficiencies of most benzo[c][1,2,5]thiadiazole‐based counterparts. In addition, an organic tandem solar cell is successfully fabricated, which exhibits a high efficiency of 17.49%. This work provides an effective and readily accessible design strategy for designing high‐performance NIR polymer acceptors, showing the great potential for future organic photovoltaic applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Semitransparent Flexible Organic Solar Cells

Yuheng Wang,Yilin Chang,Jianqi Zhang,Guanghao Lu,Zhixiang Wei

DOI: https://doi.org/10.1007/s40242-020-0113-3

IF: 3.1

2020-01-01

Chemical Research in Chinese Universities

Abstract:Abstract The semitransparent flexible organic solar cell takes advantages of flexibility, transparency, color adjustment property, which is more conducive to integrate on buildings and mobile terminals. Ascribing to the developments of narrow band gap donors and the new non-fullerene acceptors, the power conversion efficiency of semitransparent flexible organic solar cells has been achieved 10% to 12% with average visible transmittance of 17% to 21%. This review summarizes the molecular design of the most representative active layer materials, and discusses the characterization of semitransparent parameters paradigms, then we discuss how to optimize the device in combination with optical simulation, and finally list the recent development of semitransparent flexible electrodes of ITO-free organic solar cells, and give our perspectives on the next step direction.
A Nonfullerene Semitransparent Tandem Organic Solar Cell with 10.5% Power Conversion Efficiency

Shangshang Chen,Huatong Yao,Bo Hu,Guangye Zhang,Lingeswaran Arunagiri,Lik-Kuen Ma,Jiachen Huang,Jianquan Zhang,Zonglong Zhu,Fujin Bai,Wei Ma,He Yan

DOI: https://doi.org/10.1002/aenm.201800529

IF: 27.8

2018-01-01

Advanced Energy Materials

Abstract:Semitransparent organic solar cells have great potential for building integrated photovoltaics and power-generating windows owing to their advantages of light weight, mechanical flexibility, and color tunability. However, the performance of previous semitransparent organic solar cells have been limited by their relatively weak optical absorptions. In this paper, an efficient nonfullerene semitransparent tandem organic solar cell that exhibits a broad absorption from 300 to 1000 nm is reported. The rear subcell is based on a narrow-bandgap nonfullerene acceptor named IEICS-4F that exhibits a strong crystallinity and high electron mobility. As a result, the IEICS-4F-based single-junction opaque and semitransparent organic solar cells yield high efficiencies of 10.3% and 7.5%, respectively. To further enhance light harvesting of the single-junction semitransparent organic solar cells while maintaining a decent transmittance, a semitransparent tandem organic solar cell is fabricated by incorporating a medium-bandgap P3TEA: FTTB-PDI4 blend as the front subcell. A high efficiency of 10.5% is recorded with an average transmittance of 20%.
Strengthening Near‐Infrared Photon Harvesting in Semi‐Transparent All‐Polymer Solar Cells Through the Synergy of Fluorination on the Selenide Monomer Backbone

Wei Liu,Han Yu,Baoze Liu,Yan Wang,Huawei Hu,Ho Ming Ng,Chung Hang Kwok,Jicheng Yi,Chen Zhang,Fei Huang,Zonglong Zhu,He Yan

DOI: https://doi.org/10.1002/adfm.202400131

IF: 19

2024-01-01

Advanced Functional Materials

Abstract:All-polymer solar cells (all-PSCs) offer promising potential for large-scale manufacturing due to their remarkable mechanical and thermal stability. However, the limited capacity of polymer acceptors for near-infrared (NIR) photon harvesting has impeded their progress in semi-transparent (ST) all-PSCs. Here, the study develops a pair of new NIR polymer acceptors, named PYSeF-T and PYSe2F-T, with mono-/di-fluorinated end groups capped to the selenide monomer backbone, respectively. Owing to the stronger intermolecular interaction and intramolecular charge transfer effect of the di-fluorinated end groups with the selenide backbone, PYSe2F-T exhibits a stronger crystallinity and a more bathochromic absorption to 1000 nm. When blended with the donor, PM6, the PY2SeF-T-based all-PSC demonstrates a higher efficiency of 16.73% with a remarkable short-circuit current (JSC) of 27.7 mA cm-2, which is the highest JSC for all-PSCs. Based on these, the ST device based on PM6:PYSe2F-T demonstrates a superior efficiency of 12.52% with an average visible transmittance of 26.2% and a light utilization efficiency of 3.28%, outperforming the mono-fluorinated counterpart. The work provides an in-depth understanding of the above synergistic effects to develop NIR polymer acceptors and establishes a solid foundation for future investigations into large-area and flexible ST all-PSCs. The synergy of fluorination on the selenide monomer enables a novel polymer acceptor (PYSe2F-T) with a bathochromic absorption onset (approximate to 1000 nm) and ordered packing. PYSe2F-T-based devices yield an impressive short-circuit current density of 27.7 mA cm-2 with a higher efficiency of 16.7%. Beneficial from its near-infrared response, PYSe2F-T can also provide a decent performance of 12.6% in semitransparent devices with an average visible transmittance of 26.2%. image
Transparent Hole‐Transporting Frameworks: A Unique Strategy to Design High‐Performance Semitransparent Organic Photovoltaics

Pei Cheng,Hao‐Cheng Wang,Yuan Zhu,Ran Zheng,Tengfei Li,Chung‐Hao Chen,Tianyi Huang,Yepin Zhao,Rui Wang,Dong Meng,Yaowen Li,Chenhui Zhu,Kung‐Hwa Wei,Xiaowei Zhan,Yang Yang

DOI: https://doi.org/10.1002/adma.202003891

IF: 29.4

2020-08-19

Advanced Materials

Abstract:<p>Thanks to the nature of molecular orbitals, the absorption spectra of organic semiconductors are not continuous like those in traditional inorganic semiconductors, which offers a unique application of organic photovoltaics (OPVs): semitransparent OPVs. Recently, the exciting progress of materials design has promoted the development of semitransparent OPVs. However, in the perspective of device engineering, almost all reported works reduce the thickness of back/reflected electrode to obtain high average visible transmittance (AVT), which is a trade‐off between power conversion efficiency (PCE) and the transmittance of the whole solar spectrum (visible and infrared), and therefore limit the further development. Herein, a unique strategy of "transparent hole‐transporting frameworks" is proposed. A hole‐transporting large‐bandgap polymer (poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine (PTAA)) is employed to partially replace polymer donors in the active layer of PBDB‐T/Y1. PTAA is a p‐type polymer with a large bandgap of 2.9 eV; the partial substitution of PBDB‐T by PTAA reduces the absorption of the active layer only in the visible region, keeping the hole‐transporting pathways as well as the optimized film morphology. As a result, semitransparent OPVs with PCEs of 12% and AVTs of 20% are achieved, both on rigid and flexible substrates. To demonstrate the generality, this strategy is also used in three different active layers.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

Chih-Yu Chang,Lijian Zuo,Hin-Lap Yip,Chang-Zhi Li,Yongxi Li,Chain-Shu Hsu,Yen-Ju Cheng,Hongzheng Chen,Alex K-Y. Jen

DOI: https://doi.org/10.1002/aenm.201301645

IF: 27.8

2014-01-01

Advanced Energy Materials

Abstract:Highly efficient tandem and semitransparent (ST) polymer solar cells utilizing the same donor polymer blended with [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC61BM) and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) as active layers are demonstrated. A high power conversion efficiency (PCE) of 8.5% and a record high open‐circuit voltage of 1.71 V are achieved for a tandem cell based on a medium bandgap polymer poly(indacenodithiophene‐co‐phananthrene‐quinoxaline) (PIDT‐phanQ). In addition, this approach can also be applied to a low bandgap polymer poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene)‐alt‐4,7‐(5‐fluoro‐2,1,3‐benzothia‐diazole)] (PCPDTFBT), and PCEs up to 7.9% are achieved. Due to the very thin total active layer thickness, a highly efficient ST tandem cell based on PIDT‐phanQ exhibits a high PCE of 7.4%, which is the highest value reported to date for a ST solar cell. The ST device also possesses a desirable average visible transmittance (≈40%) and an excellent color rendering index (≈100), permitting its use in power‐generating window applications.
Semitransparent Ternary Nonfullerene Polymer Solar Cells Exhibiting 9.40% Efficiency and 24.6% Average Visible Transmittance

Zhenghao Hu,Jian Wang,Zhi Wang,Wei Gao,Qiaoshi An,Miao Zhang,Xiaoling Ma,Jianxiao Wang,Jianli Miao,Chuluo Yang,Fujun Zhang

DOI: https://doi.org/10.1016/j.nanoen.2018.11.010

IF: 17.6

2018-01-01

Nano Energy

Abstract:Efficient semitransparent ternary polymer solar cells (PSCs) are fabricated with narrow band gap material PTB7-Th as donor, two narrow band gap nonfullerene materials BDTThIT-4F and IEICO-4F as one alloyed acceptor. Firstly, the content of IEICO-4F in acceptors is optimized in opaque PSCs with 100 nm Ag as electrode, power conversion efficiency (PCE) of the optimized opaque PSCs arrives to 12.03% with 50 wt% IEICO-4F in the alloyed acceptor. The 1 nm Au/10 nm Ag is designed to replace 100 nm Ag as semitransparent electrode. The semitransparent electrode exhibits high transmittance in visible light range and low transmittance in long wavelength range, which is beneficial to improve photon harvesting of active layers prepared with narrow band gap materials. The semitransparent ternary PSCs exhibit a PCE of 9.40% with 24.6% average visible transmittance from 370 nm to 740 nm, which should be among the highest values for semitransparent PSCs. This work indicates that ternary strategy may have great potential in preparing efficient semitransparent PSCs with two narrow band gap nonfullerene materials.
Highly Efficient Near-Infrared and Semitransparent Polymer Solar Cells Based on an Ultra-Narrow Bandgap Nonfullerene Acceptor

Juan Chen,Guangda Li,Qinglian Zhu,Xia Guo,Qunping Fan,Wei Ma,Maojie Zhang

DOI: https://doi.org/10.1039/c8ta11484f

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Non-fullerene polymer solar cells based on a low bandgap polymer PTB7-Th and an ultra-narrow bandgap acceptor ACS8 exhibited an optimal PCE of 13.2%, indicating that the blend of PTB7-Th/ACS8 has potential for the practical applications of PSCs.
High Efficiency Near-Infrared And Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells

Yongxi Li,Jiu-Dong Lin,Xiaozhou Che,Yue Qu,Feng Liu,Liang-Sheng Liao,Stephen R Forrest

DOI: https://doi.org/10.1021/jacs.7b11278

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:The absence of near-infrared (NIR) solar cells with high open circuit voltage (V-oc) and external quantum efficiency (EQE) has impeded progress toward achieving organic photovoltaic (OPV) power conversion efficiency PCE > 15%. Here we report a small energy gap (1.3 eV), chlorinated nonfullerene acceptor-based solar cell with PCE = 11.2 +/- 0.4%, short circuit current of 22.5 +/- 0.6 mA cm(-2), V-oc = 0.70 +/- 0.01 V and fill factor of 0.71 +/- 0,02, which is the highest performance reported to date for NIR single junction OPVs. Importantly, the EQE of this NIR solar cell reaches 75%, between 650 and 850 nm while leaving, a transparency window between 400 and 600 nm. The semitransparent OPV using an ultrathin (10 nm) Ag cathode shows PCE = 7.1 +/- 0.1%, with an average visible transmittance of 43 +/- 2%, Commission d'Eclairage chromaticity coordinates of (0.29, 0.32) and a color rendering index of 91 for simulated AM1.5 illumination transmitted through the cell.
Efficiency and average visible light transmittance improved simultaneously of the semitransparent organic solar cells

Qiao Zheng,Hui Zhou,Shunli Du,Pengsen Chen,Jingang Huang,Hui Deng,Jionghua Wu,Caixia Zhang,Weihuang Wang,Shuying Cheng

DOI: https://doi.org/10.1007/s10854-024-12167-6

2024-02-24

Journal of Materials Science Materials in Electronics

Abstract:Efficient ternary organic solar cells were achieved by utilizing an ultra-narrow bandgap material, IEICO-4 F, mixed with the fullerene material PC 71 BM as the acceptor and PTB7-Th polymer as the donor. The different weights of IEICO-4 F were dropped into the active layer to adjust the ratio of acceptor and donor, optimizing the performance of the cells. The results showed the ternary organic solar cells with 10wt% IEICO-4 F could obtain a higher short-circuit current density resulting in the power conversion efficiency (PCE) up to 9.56%. MoO 3 /Ag/MoO 3 as the transparent electrodes of the semitransparent organic solar cell (ST-OSCs) were prepared. The different thicknesses of Ag impacts on the performance of the ST-OSCs were investigated. The PCE of the ternary ST-OSCs was increased to 7.34% and the average visible light transmittance (AVT) was increased to 28.74% when Ag was 10 nm thickness. The ternary ST-OSCs presented both a good light transmittance and a high PCE. In addition, the light utilization efficiency of the ST-OSCs was increased to 2.1%, and the color reproduction index was improved too. The PCE and AVT of the ST-OSCs could improve simultaneously due to the appropriate ratio of the acceptor and donor as well as the optimized transparent electrodes.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Efficient Semitransparent Solar Cells with High Nir Responsiveness Enabled by A Small-Bandgap Electron Acceptor

Feng Liu,Zichun Zhou,Cheng Zhang,Jianyun Zhang,Qin Hu,Thomas Vergote,Thomas P. Russell,Xiaozhang Zhu

DOI: https://doi.org/10.1002/adma.201606574

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Inspired by the remarkable promotion of power conversion efficiency (PCE), commercial applications of organic photovoltaics (OPVs) can be foreseen in near future. One of the most promising applications is semitransparent (ST) solar cells that can be utilized in value-added applications such as energy-harvesting windows. However, the single-junction STOPVs utilizing fullerene acceptors show relatively low PCEs of 4%-6% due to the limited sunlight absorption because it is a dilemma that more photons need to be harvested in UV-vis-near-infrared (NIR) region to generate high photocurrent, which leads to the significant reduction of device transparency. This study describes the development of a new small-bandgap electron-acceptor material ATT-2, which shows a strong NIR absorption between 600 and 940 nm with an Egopt of 1.32 eV. By combining with PTB7-Th, the as-cast OPVs yield PCEs of up to 9.58% with a fill factor of 0.63, an open-circuit voltage of 0.73 V, and a very high short-circuit current of 20.75 mA cm-2 . Owing to the favorable complementary absorption of low-bangap PTB7-Th and small-bandgap ATT-2 in NIR region, the proof-of-concept STOPVs show the highest PCE of 7.7% so far reported for single-junction STOPVs with a high transparency of 37%.
Near infrared electron acceptors with a photoresponse beyond 1000 nm for highly efficient organic solar cells

Chengliang He,Yaokai Li,Yanfeng Liu,Yuhao Li,Guanqing Zhou,Shuixing Li,Haiming Zhu,Xinhui Lu,Fengling Zhang,Chang-Zhi Li,Hongzheng Chen

DOI: https://doi.org/10.1039/d0ta06907h

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Developing near infrared (NIR) organic semiconductors is indispensable for promoting the performance of organic solar cells (OSCs), but addressing the trade-off between voltage and current density thus achieving high efficiency with low energy loss is still an urgent challenge. Herein, NIR acceptors (H1, H2 and H3) with a photoresponse beyond 1000 nm were developed by conjugating dithienopyrrolobenzothiadiazole to 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrileviavaried alkyl thiophene bridges. It was found that the linear outward chains in thiophene bridges could mitigate both the conformation disorder of H3 and the electronic disorder of the PBDB-T:H3 blends, which could help to form a favorable blend morphology, facilitating highly efficient photoelectric conversion in the resultant OSCs. As a result, devices based on PBDB-T:H3 achieve a high efficiency of 13.75% with a low energy loss of 0.55 eV, which is one of the highest efficiencies and the lowest energy loss among OSCs with an optoelectronic response near 1000 nm. This work provides a new design strategy towards NIR acceptors for efficient OSCs and future exploration of functional optoelectronics.
Simultaneously Improved Efficiency and Average Visible Transmittance of Semitransparent Polymer Solar Cells with Two Ultra-Narrow Bandgap Nonfullerene Acceptors

Xiaoling Ma,Zuo Xiao,Qiaoshi An,Miao Zhang,Zhenghao Hu,Jianxiao Wang,Liming Ding,Fujun Zhang

DOI: https://doi.org/10.1039/c8ta08891h

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:The efficiency and average visible transmittance of semitransparent polymer solar cells can be simultaneously improved by employing a ternary strategy.
High-performance Semitransparent Organic Solar Cells Exceeding 96％Near-Infrared Light Insulation Rate

Yao-kai Li,Shi-tao Guan,Shui-xing Li,Li-jian Zuo,Hong-zheng Chen

DOI: https://doi.org/10.11777/j.issn1000-3304.2024.24102

2024-01-01

Acta Polymerica Sinica

Abstract:Semitransparent organic solar cells(STOPV)are a widely acknowledged solar energy conversion technology that can simultaneously absorb invisible light for energy production while allowing visible light transmission for transparency.However,regarding STOPV integrated on building to reach practical application in the future,the harmonious unification of power conversion efficiency(PCE),average photopic transmittance(APT),and the infrared-light rejection rate(IRR)must be achieved.In contrast to traditional single-optimization strategies,we present an approach to enhancing STOPV performance by using a ternary strategy coupled with multiple optical modulation engineering.On the materials level,by combining the wide bandgap donor PM6 and two near-infrared acceptors owing similar absorption but different end groups combinations(symmetric molecule BTP-eC9 and asymmetric molecule BTP-S9),we have optimized the efficiency of a single-junction ternary opaque organic solar cell to 18.66％.On the device level,we propose a triple optical manipulation method by integrating an anti-reflection layer(ARC),a tellurium dioxide(TeO2)optical layer,and a bandpass filter(BF)into the original STOPV structure,to address the see-saw effect among PCE,APT and IRR.Ultimately,our optimized STOPV achieved a PCE of 12.82％and APT of 35.70％,causing a light utilization efficiency(LUE)of 4.6％,and an infrared-light rejection rate of 96.8％,ranking one of the highest performance multifunction-STOPV.
Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR-Absorbing Electron Acceptors.

Shuixing Dai,Tengfei Li,Wei Wang,Yiqun Xiao,Tsz-Ki Lau,Zeyuan Li,Kuan Liu,Xinhui Lu,Xiaowei Zhan

DOI: https://doi.org/10.1002/adma.201706571

IF: 29.4

2018-01-01

Advanced Materials

Abstract:In order to utilize the near-infrared (NIR) solar photons like silicon-based solar cells, extensive research efforts have been devoted to the development of organic donor and acceptor materials with strong NIR absorption. However, single-junction organic solar cells (OSCs) with photoresponse extending into >1000 nm and power conversion efficiency (PCE) >11% have rarely been reported. Herein, three fused-ring electron acceptors with varying core size are reported. These three molecules exhibit strong absorption from 600 to 1000 nm and high electron mobility (>1 x 10(-3) cm(2) V-1 s(-1)). It is proposed that core engineering is a promising approach to elevate energy levels, enhance absorption and electron mobility, and finally achieve high device performance. This approach can maximize both short-circuit current density ( J(SC)) and open-circuit voltage (V-OC) at the same time, differing from the commonly used end group engineering that is generally unable to realize simultaneous enhancement in both V-OC and J(SC). Finally, the single-junction OSCs based on these acceptors in combination with the widely polymer donor PTB7-Th yield J(SC) as high as 26.00 mA cm(-2) and PCE as high as 12.3%.

A Near-Infrared Polymer Enables over 50% Transmittance in Semi-Transparent Organic Solar Cells

Light Management for Fullerene-Based Semitransparent Polymer Solar Cells with a Distributed Bragg Reflector

Wide Bandgap Polymer with Narrow Photon Harvesting in Visible Light Range Enables Efficient Semitransparent Organic Photovoltaics

Synthesizing near‐ultraviolet absorbed donor for transparent polymer solar cells

Infrared-transparent polymer solar cells

Design of UV-Absorbing Donor Molecules for Nearly Imperceptible Organic Solar Cells

Rational Design of Near‐Infrared Polymer Acceptors Using Steric Hindrance Strategy for High‐Performance Organic Solar Cells

Semitransparent Flexible Organic Solar Cells

A Nonfullerene Semitransparent Tandem Organic Solar Cell with 10.5% Power Conversion Efficiency

Strengthening Near‐Infrared Photon Harvesting in Semi‐Transparent All‐Polymer Solar Cells Through the Synergy of Fluorination on the Selenide Monomer Backbone

Transparent Hole‐Transporting Frameworks: A Unique Strategy to Design High‐Performance Semitransparent Organic Photovoltaics

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

Semitransparent Ternary Nonfullerene Polymer Solar Cells Exhibiting 9.40% Efficiency and 24.6% Average Visible Transmittance

Highly Efficient Near-Infrared and Semitransparent Polymer Solar Cells Based on an Ultra-Narrow Bandgap Nonfullerene Acceptor

High Efficiency Near-Infrared And Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells

Efficiency and average visible light transmittance improved simultaneously of the semitransparent organic solar cells

Efficient Semitransparent Solar Cells with High Nir Responsiveness Enabled by A Small-Bandgap Electron Acceptor

Near infrared electron acceptors with a photoresponse beyond 1000 nm for highly efficient organic solar cells

Simultaneously Improved Efficiency and Average Visible Transmittance of Semitransparent Polymer Solar Cells with Two Ultra-Narrow Bandgap Nonfullerene Acceptors

High-performance Semitransparent Organic Solar Cells Exceeding 96％Near-Infrared Light Insulation Rate

Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR-Absorbing Electron Acceptors.