A Three-Dimensional Surface Layer and a Composite Aphroid Layer Constructed by a Facile Rolling Method for High-Performance Li Metal Anodes
Yanyuan Qi,Lin Lin,Zelang Jian,Qiongzhen Fan,Wen Chen
DOI: https://doi.org/10.1021/acsaem.1c01399
IF: 6.4
2021-07-16
ACS Applied Energy Materials
Abstract:The poor electrochemical performance and potential safety hazards caused by lithium dendrites have severely restricted the practical application of Li metal anodes, although they are one of the most promising anode candidates for future high-energy-density Li batteries. One key point for inhibiting Li dendrites is to optimize the uniform and stable interface between the electrode and electrolyte for homogeneous electric field distribution. Here, the composite Li metal anode consisting of the top three-dimensional (3D) surface layer, the middle aphroid layer, and the bottom metallic Li is fabricated by the rolling method. The 3D surface layer and composite aphroid layer based on lithiophilic Ag-decorated carbon fibers enhance the uniformity and stability of the interface between the electrode and electrolyte and facilitate fast ion diffusion and electron transfer, which promote stable nondendritic Li deposition. The composite Li anode exhibits a low overpotential of only ∼20 mV after cycling for over 400 h at 1 mA cm<sup>–2</sup>. When paired with LiCoO<sub>2</sub>, the full cell delivers excellent cycling performance of 500 cycles at 2C with a capacity retention of over 84%. The design of the 3D structure layer provides references for the industrial application of Li metals modified by low-cost raw materials and simple methods.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c01399?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c01399</a>.The scanning electron microscopy images of the commercial degreasing cotton, the photographs of the pristine cotton, as-prepared CFs, the cotton impregnated with the Ag solution (Ag-cotton), as-prepared Ag-CFs, and as-prepared Ag solution, the TGA curve of the Ag-CFs, the XRD patterns, Raman spectra, TGA curve, and FESEM images at different magnifications and corresponding EDS mapping of m-Ag-CFs, voltage–time profiles of Ag-CFs/Li and m-Ag-CFs/Li in symmetric cells with an ether-based electrolyte at 1.0 mA cm<sup>–2</sup> and a capacity of 1.0 mAh cm<sup>–2</sup>, the surface FESEM images of bare Li and Ag-CFs/Li composite anodes after cycling for 500 h, and voltage–time profiles and rate capabilities of Ag-CFs/Li, CFs/Li, and bare Li in symmetric cells with a carbonate electrolyte (1 M LiPF<sub>6</sub> in 1:1 v/v EC/DEC) (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c01399/suppl_file/ae1c01399_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels