Abstract:Based on previous soot studies, this paper proposes a new method to quantify the evolution of the soot generation mechanism in flames. The soot distribution in inverse diffusion flame at different fuel gas velocities was quantitatively measured by laser-induced incandescent (LII) technique, and the soot structure evolution was analyzed by Raman spectroscopy and field emission transmission electron microscopy (FETEM). Laser-induced breakdown spectroscopy (LIBS) and numerical simulation were used to investigate the association between the intensity ratio of hydrocarbon atoms of at different positions of the flame and soot formation. Meanwhile, a detailed chemical kinetic simulation of the formation process of soot was carried out, and the flame structure was divided in more detail. The flame state in different regions and the key reactions of soot formation were analyzed. The results presented that the volume fraction of soot measured by LII is consistent with the height-dependent graphitization of the flame and is identical to the yellow definition of the flame. The variation of the C/H atomic intensity ratio reflected the soot formation in flame. The C-H intensity ratio in the flame axial direction showed a bimodal distribution, corresponding to the blue phase of soot precursor formation and the yellow phase of soot formation, respectively. In addition, the C-H atomic intensity ratio and the C-H atomic molar ratio showed a parabolic transition from incipient to mature soot in the soot production region. The C-H intensity ratios at different heights are linear in the radial direction, and the main core region of soot production can be obtained when the C-H intensity ratio is 0.10 similar to -0.13. With radial distance increases, it is clear results that the most sensitive reaction of (precursor) A1 changes from C6H5OH + H = A(1) + OH to C2H3 + HCO=C3H3 + OH. It reveals that with the increase of yellow light, the soot structure along the flame center line is gradually graphitized, and the graphitization degree is the highest at the axial height of 18.0De similar to 22.4De. This is consistent with the distribution of C-H atomic intensity ratio. The present results demonstrate that LIBS can quickly achieve the initial measurement of soot and provide a new method for the study of flame soot during its evolution.

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

Measurements of Particulate Matter Concentration by the Light Scattering Method: Optimization of the Detection Angle

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

A New Angular Light Scattering Measurement of Particulate Matter Mass Concentration for Homogeneous Spherical Particles

Measurement of Soot Concentration in Burner Diffusion Flames through Emission Spectroscopy with Particle Swarm Optimization

Online Measurement of Soot Formation Distribution along Time and Axial in the Volatile Flames of Coal and Biomass Using Light Scattering

A novel light scattering method with size analysis and correction for on-line measurement of particulate matter concentration

Study of a novel instrument for on-line soot concentration measurement

An optical soot sizing method without prior morphology parameters

Quantifying the Fractal Dimension and Morphology of Individual Atmospheric Soot Aggregates

Measurement Method For Low-Concentration So2 Based On Statistics And Doas

Measuring Particulate Concentration by Means of Scattered Light Scintillation

An Improved On-Line Measurement Method of Particulate Matter Concentration Using Tri-Wavelength Laser Light Scattering

Study on the Measurement of Soot Particle Size by Laser Induced Incandescence

Optimal static light scattering detection angle for particulate matter size and concentration measurement

The measuring technique of mass concentration and particle size in particulate emissions

Detection of Particle Concentration and Particle Size Based on Aerodynamic Particle Size Spectrometer

A side-scattering imaging method for the in-line monitoring of particulate matter emissions from cooking fumes

Study on the Application of Laser Diagnosis Technology in the Rapid Real Time Measurement of Soot

A 3D Numerical Simulation of Laser-Induced Incandescence of Soot Particles in Coal Combustion Products

Development and validation of a multi-angle light scattering method for fast engine soot mass and size measurements