Abstract:The Li-CO2 batteries are concerned as a potential energy conversion and storage system which can not only effectively capture CO2 gas but also offer a high energy density. Therefore, they can be widely used in CO2-enriched environments such as submarine operations. However, the development of Li-CO2 batteries is still restricted by the high polarization and poor cycle performance mainly due to the insulating discharge product, e.g., Li2CO3. Herein, the Mn2Co2C nanoparticles dispersed in interconnected nitrogen-doped carbon frameworks (Mn2Co2C@NC), obtained by pyrolyzing MnCo Prussian blue analogous (MnCo-PBA), are first utilized as the cathode materials in Li-CO2 batteries. The batteries deliver a high discharge capacity (18962 mAh g−1 at 100 mA g−1), the lowest overpotential (1.47 V), and the best cycle performance (330 cycles, close to 1800 h, with a limited capacity of 500 mAh g−1 at 200 mA g−1). The good cycling stability under 200 mA g−1 is more prominent for current Li-CO2 batteries. The superior performance of Mn2Co2C@NC is ascribed to abundant catalytic sites of Mn/Co-nitrogen-carbon (Mn/Co-NC) and nitrogen-doped carbon, which have outstanding adsorption and activation effects on CO2. Meantime, the robust interconnected carbon framework provides fast electron/electrolyte transport paths and a large deposition space of Li2CO3. The density functional theory calculations reveal the strong adsorption of Li+ and CO2, strong catalytic performance for CO2 reduction, and excellent electrical conductivity of the Mn/Co-NC and nitrogen-doped carbon active sites. Finally, when combining a gel electrolyte, to the best of our knowledge, for the first time the fabricated quasi-solid-state Li-CO2 batteries demonstrate good cycling stability with high deliverable specific discharge capacity, highlighting its great potential for the applications of flexible and wearable batteries.

Binder‐Free MoN Nanofibers Catalysts for Flexible 2‐electron Oxalate‐Based Li‐CO2 Batteries with High Energy Efficiency

Binder‐Free MoN Nanofibers Catalysts for Flexible 2‐Electron Oxalate‐Based Li‐CO 2 Batteries with High Energy Efficiency

Freestanding Mo<sub>3</sub>N<sub>2</sub> nanotubes for long-term stabilized 2e<SUP>-</SUP> intermediate-based high energy efficiency Li-CO<sub>2</sub> batteries

MOF-Derived CoSe2 Nanoparticles/Carbonized Melamine Foam as Catalytic Cathode Enabling Flexible Li-CO2 Batteries with High Energy Efficiency and Stable Cycling

Flexible Li–CO2 Batteries with Boosted Reaction Kinetics and Cyclelife Enabled by Heterostructured Mo3N2@TiN Cathode and Interface‐protected Li Anode

Vertically Aligned N-doped Carbon Nanotubes Arrays as Efficient Binder-free Catalysts for Flexible Li-CO2 Batteries

Nanofibrous Cathode Catalysts with MoC Nanoparticles Embedded in N-Rich Carbon Shells for Low-Overpotential Li-CO2 Batteries.

Freestanding Mo <sub>3</sub> N <sub>2</sub> nanotubes for long‐term stabilized 2e <sup>−</sup> intermediate‐based high energy efficiency Li–CO <sub>2</sub> batteries

A Quasi-Solid-State Flexible Fiber-Shaped Li-CO2 Battery with Low Overpotential and High Energy Efficiency.

Mo2N–ZrO2 Heterostructure Engineering in Freestanding Carbon Nanofibers for Upgrading Cycling Stability and Energy Efficiency of Li–CO2 Batteries

MoO2 nanoparticles/carbon textiles cathode for high performance flexible Li-O2 battery

Mo 2 C / CNT : an Efficient Catalyst for Rechargeable Li – CO 2 Batteries

A Composite of Carbon-Wrapped Mo2c Nanoparticle and Carbon Nanotube Formed Directly on Ni Foam As A High-Performance Binder-Free Cathode for Li-O-2 Batteries

Heterostructured CuCo2S4-Co9S8 Nanosheets As Freestanding Cathodes for Flexible Fiber-Shaped Li-CO2 Batteries

Highly Surface-Wrinkled And N-Doped Cnts Anchored On Metal Wire: A Novel Fiber-Shaped Cathode Toward High-Performance Flexible Li-Co2 Batteries

Bamboo-Like Nitrogen-Doped Carbon Nanotube Forests as Durable Metal-Free Catalysts for Self-Powered Flexible Li-CO2 Batteries

In-situ construction of Cu–Co4N@CC hierarchical binder-free cathode for advanced and flexible Li–CO2 batteries: Electron structure and mass transfer modulation

Integrated Carbon Nanotube/MoO 3 Core/Shell Arrays as Freestanding Air Cathodes for Flexible Li–CO 2 Batteries

A high-performance oxygen electrode for Li–O2 batteries: Mo2C nanoparticles grown on carbon fibers

Dispersed Mn2Co2C nanoparticles in interconnected nitrogen-doped carbon framework as cathode catalysts for efficient and long-life Li-CO2 batteries

Hierarchical Porous Nickel Cobaltate Nanoneedle Arrays as Flexible Carbon-Protected Cathodes for High-Performance Lithium-Oxygen Batteries