Abstract:Finite element analysis for the strength prediction of 3D braided composites structures are presented in this paper. A strength analysis model was established to investigate the strength characteristics of the 3D braided composites. Repeated unit-cell (RUC) model was used in this model to describe the microstructure of 3D braided composites and differences between yarn configurations in corner, surface and interior RUCs were considered. Composite damage model were introduced into the yarns of the RUCs in the analysis model and the macroscopic failure and damage evolution of the 3D braided composites structures were characterized by the damage of yarns by nonlinear homogenization method. To validate the veracity of this model, a user defined material subroutine (UMAT) was developed to introduce this model into the finite element analysis software and the damage progression of a 3D braided composite structure under three-point bending was simulated. Good agreements were achieved in the load- deflection curves and damage morphology between experimental and numerical results. effect of yarn distortion was considered in the simulation. Dong et al. (9) simulated the non-linear behavior of cumulative damages of 3D braided composites by the method of Asymptotic Expansion Homogenization (AEH) and the influence of face cell and corner cell and proper boundary conditions on each kind of unit cells were studied in his paper. Most of the investigations on the elastic and strength properties of 3D braided composite were based on simple loading modes such as unidirectional tension and compression, in which no macroscopic model needs to be built and the mechanical properties of 3D braided composites can be characterized by the repeated unit cell, providing a way to consider the effect of microstructure details on the macro-scale property predictions. However, this method is not suitable for investigating the macroscopic strength properties of 3D braided composites structures as the stress distribution inside the braided composite structures may be non-uniform and cannot be characterized by a single unit cell. A strength analysis model based on the RUCs was established in this paper. The repeated unit-cell (RUC) model was used to simulate the mechanical properties of 3D braided composites and three kinds of RUCs were considered based on the different yarn configurations in the corner, surface and interior regions of braided composites. Three-dimensional composite damage models were applied for the yarns in RUCs to simulate the macroscopic nonlinear response of braided composites. A user defined material subroutine (UMAT) was developed to introduce this method into the numerical simulation. The strength analysis of a 3D braided composite structure was made to verify the validate of the model and good agreements were obtained between numerical prediction and experimental results.

A Novel Integrated Model for 3D Braided Composites Considering Stochastic Characteristics

A Novel Modeling Method to Study Compressive Behaviors of 3D Braided Composites Considering Effects of Fiber Breakage and Waviness Defects

Mesoscopic Modeling of 3d Four-Directional Braided Composites

Microstructural Modeling and Second-Order Two-Scale Computation for Mechanical Properties of 3d 4-Directional Braided Composites

ON GEOMETRICAL MODEL AND STIFFNESS PREDICTION OF 3D 4-DIRECTIONAL BRAIDED COMPOSITES

Mechanical Analysis of Three-Dimensional Braided Composites by Using Realistic Voxel-Based Model with Local Mesh Refinement

Prediction of Mechanical Properties on 3D Braided Composites with Void Defects

Establishing RVE model composed of dry fibers and matrix for 3D four-directional braided composites

Microstructure and Mechanical Properties of Three-Dimensional Five-Directional Braided Composites

A novel finite element method for predicting the tensile properties of 3D braided composites

Theoretical Prediction on the Mechanical Properties of 3D Braided Composites Using a Helix Geometry Model

Towards Accurate Prediction of the Dynamic Behavior and Failure Mechanisms of Three-Dimensional Braided Composites: a Multiscale Analysis Scheme

Prediction of elastic properties of 3D4D rotary braided composites with voids using multi-scale finite element and surrogate models

A Random Waveness Model for the Stiffness and Strength Evaluation of 3D Woven Composites

Nonlinear Mechanical Property of 3D Braided Composites with Multi-Types Micro-Distortion: A Quantitative Evaluation

Prediction of the stiffness and strength of 3D five-directional braided composites based on the bridge model

Theoretical prediction of stiffness and strength of three-dimensional and four-directional braided composites

Evaluation of Three Unit Cell Models in Predicting the Mechanical Behaviour of 3D Four-Directional Braided Composites

The Effect of Yarn Distortion on the Mechanical Properties of 3D Four-Directional Braided Composites

Finite Element Modeling Based On Composite Damage Theory For The Strength Prediction of 3D Braided Composites Structures

Novel processing technology and mesoscopic geometric modeling of a new three-dimensional (3D) braided composite and the study on its longitudinal mechanical properties