Abstract:Although manufactured sand is becoming increasingly popular to prepare the cleaner and sustainable construction production in face of the depletion of natural river sand, it needs to be further promoted in some advanced concretes like ultra-high performance concrete (UHPC). Different lithological manufactured sands with the same particle gradation were used as fine aggregates to prepare UHPC in this study. Meanwhile, the UHPC mixtures prepared with washed or unwashed sands were also compared. The following aspects were evaluated: flowability, rheology, setting time, mechanical strength, volume stability, thermogravimetric behavior, pore distribution, microstructure characteristics, environmental and economical benefits. Results indicated that sand washing process greatly lowered the apparent viscosity and yield stress, and improved the flowability of UHPC. Increments of 16.7 %, 19.6 % and 15.7 % in flowability were observed for washed granite, tuff and limestone sand UHPC. Pre-washing process significantly delayed the setting times. Tuff sand UHPC demonstrated the optimal mechanical properties (compressive, flexural and tensile strengths), with a compressive strength exceeding 150 MPa at 28 days. In most cases, sand washing process had a slightly beneficial effect on mechanical strengths. The use of washed sand reduced the autogenous shrinkage of UHPC by 5.1%-10.6 %. Tuff sand UHPC possessed the largest cumulative pore volume, while limestone one had the fewest macropores (>100 nm). The cumulative pore volume and total porosity decreased with the addition of washed sands. Compared with traditional UHPC, the utilization of manufactured sand with different lithology and pre-washing process in UHPC could not only illustrate good workability and mechanical strengths, it also demonstrated lower carbon emissions and production costs. The prepared eco-friendly UHPC in this study effectively utilized the solid waste and lessened the environmental burden, which proposed an emerging approach for the application of manufactured sands in green advanced concretes in future work.

Dynamic Compression Mechanical Properties of Eco-Friendly Ultra-High Performance Concrete Produced with Aeolian Sand: Experimental and Three-Dimensional Mesoscopic Investigation

Quasi-static and Dynamic Mechanical Properties of Eco-Friendly Ultra-High-performance Concrete Containing Aeolian Sand

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Mechanical Properties and Environmental Evaluation of Ultra-High-Performance Concrete with Aeolian Sand

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Workability, Hydration, Microstructure, and Mechanical Properties of UHPC Produced with Aeolian Sand

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Three-dimensional mesoscopic investigation of the compression mechanical properties of ultra-high performance concrete containing coarse aggregates

Complete Stress-Strain Behavior of Ecological Ultra-High-Performance Cementitious Composite under Uniaxial Compression

Mechanical Properties of Ultra-High Performance Concrete (UHPC) and Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) with Recycled Sand

Dynamic Compression Behavior of Ultra-High Performance Cement Based Composites

Effect of Fine Aggregate on Rheological Properties of Ultra-High Performance Concrete（uhpc)

Experimental Investigation on Mechanical Property and Microstructure of Ultra‐high‐performance Concrete with Ceramsite Sand

Experimental Investigation of the Impact of Blended Fibers on the Mechanical Properties and Microstructure of Aeolian Sand Concrete

Optimization design and microstructure analysis of ultra-high performance cement-based composites

Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition

Multi-Axial Dynamic Constitutive Model Of Ultra High Performance Concrete

Mechanical properties of multi-scale mono/hybrid non-metallic fiber-reinforced ultra-high performance seawater sea-sand concrete

Effects of Steel Fiber and Specimen Geometric Dimensions on the Mechanical Properties of Ultra-High-Performance Concrete

Static, dynamic mechanical properties and microstructure characteristics of ultra-high performance cementitious composites

Mechanical properties and acoustic emission analysis of desert sand concrete reinforced with steel fiber