Planar Dual‐polarized Differentially Fed Multibeam Patch Antenna Array

Kangkang Han,Gao Wei,Min Wang,Tiancheng Qiu
DOI: https://doi.org/10.1002/mmce.23075
IF: 1.987
2022-01-01
International Journal of RF and Microwave Computer-Aided Engineering
Abstract:A design of planar dual-polarized differentially fed multibeam patch antenna array (DFMPAA) is presented in this article. The dual-polarized DFMPAA is composed of two circular 4 x 4 butler matrixs (BMs) and a 1 x 4 dual-polarized patch antenna array. The two BMs are designed in the top and bottom layer as the feeding network of horizontal polarization (HP) and vertical polarization (VP), respectively. The patch is designed as the radiation element of the dual-polarized DFMPAA, which is fed by the slot and aperture coupling to generate the HP and VP wave, respectively. To achieve high cross-polarization discrimination (XPD), the antenna element is fed differentially. A prototype working at 5.5 GHz is fabricated and measured in order to validate the performance of the proposed dual-polarized DFMPAA. The dimension of the dual-polarized DFMPAA is 3.8 lambda(0) x 1.7 lambda(0). Measured results show that when the beam scan to the maximal pointing angle, the XPD of the dual-polarized DFMPAA in HP and VP are higher than 27 and 29 dB, respectively. Additionally, the beams of the dual-polarized DFMPAA can cover the range of +/- 42 degrees in horizontal plane.
What problem does this paper attempt to address?