Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Numerical Simulation Research on Slow Cook-off of Warhead of DNAN-based Melt-cast Explosive

Test Design and Theoretical Calculation of Cook-off Characteristics and Thermal Safety Venting Area of RBOE Charge

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

Numerical simulation study on the slow cook-off response characteristics of PBX explosive

Assessing an Experimental Approach for Chemical Explosive Mode and Heat Release Rate Using DNS Data

Thermal response of DNAN based explosives considering thermodynamic coupling:Under different charge quantity and diameter changes

Thermal hazard assessment of TKX-50-based melt-cast explosive

Research of detonation products of RDX/Al from the perspective of composition

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Study on the Influence of Air Gap on the Thermal Response Violence of Pressed Polymer Bonded Explosive Charge in Slow Cook-Off Experiment

Separate Calibration of Johnson–Cook Model for Static and Dynamic Compression of a DNAN-Based Melt-Cast Explosive

Ab Initio Neural Network MD Simulation of Thermal Decomposition of a High Energy Material CL-20/TNT.

Experimental and Numerical Simulation Study on Thermal Decomposition Model of Ammonium Nitrate

Assessing the thermal safety of solid propellant charges based on slow cook-off tests and numerical simulations

An Equation of State for the Detonation Product of Copper Oxide/aluminum Nanothermite Composites

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Numerical simulation of radiated noise during combustion of energetic materials in a closed bomb

ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

The investigation of NTO/HMX-based plastic-bonded explosives and its safety performance

Numerical Studies on Explosive Welding with ANFO by Using a Density Adaptive SPH Method

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives