Abstract:The usage of iron tailings as construction aggregates is a potential route to save the cost of standard sands and protect the environment of mining area. This study mainly investigates the performance of cement mortars by partial replacement of the standard sands (SS) with sulfide-contained iron ore tailings (IOT). The physicomechanical properties, microstructure, and hydration products were measured by consistency test, porosity test, strength test, P-wave velocity test, scanning electron microscopy test (SEM), and X-ray diffraction test (XRD). It is proven that the graded IOT (GIOT), which has an identical particle size distribution with SS, is better than the ungraded IOT to serve as fine aggregate by replacing SS because a suitable GIOT content can better reduce the adverse effect of excess fine tailings (<0.15 mm) and sulfide on the cement mortar. The graded tailings cement mortar (GTCM) by using GIOT has denser pore structure, lower porosity, higher strength, and P-wave velocity than ungraded tailings cement mortar (UTCM) by using UIOT at the same curing condition and age. In addition, although a high sulfide content (approximately 4.44% to 5.55% by weight) by adding more than 40% GIOT is conducive to reduce the porosity and improve the strength of GTCM before 28 days, it is harmful for the long-term performance beyond 90 days. The expansive ettringite and gypsum produced by the reaction of excess sulfide will cause microcracks and thus reduce the strength beyond 40% GIOT. To ensure the long-term performance of GTCM, the sulfide content in the aggregate should be controlled below 3% by weight, and the optimal substitution ratio of GIOT corresponding to this sulfide content is approximately 20% to 30%.

Mechanochemical Activation of Iron Ore Tailing-Based Ternary Supplementary Cementitious Materials

The Role of Chemical Activation in Strengthening Iron Ore Tailings Supplementary Cementitious Materials

Experimental Study on the Use of Iron Tailings-Based Multicomponent Solid Waste as SCMs

Study on Properties and Optimization of Ternary Auxiliary Cementing Materials for IOTs.

Enhancement Mechanism of Micro-Iron Ore Tailings on Mechanical Properties and Hydration Characteristics of Cement-Steel Slag System

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Iron ore tailings, phosphate slags, and lithium slags as ternary supplementary cementitious materials for concrete: Study on compression strength and microstructure

Sustainable assessment and synergism of ceramic powder and steel slag in iron ore tailings-based concrete

Sustainable Utilization of Waste Oyster Shell Powders with Different Fineness Levels in a Ternary Supplementary Cementitious Material System

Utilization of Iron Ore Tailings with High Volume in Green Concrete

Experimental Investigation on the Performance of Cement Mortar by Partial Replacement of the Standard Sands with Sulfide-Contained Iron Tailings

The Effects of Iron Tailings on Steel Slag-Based Cementitious Systems: Strength, Hydration Products, and Volume Stability

Hydration and properties of hydrogen-based mineral phase transformation iron ore tailings as supplementary cementitious material

Iron Ore Tailings Used for the Preparation of Cementitious Material by Compound Thermal Activation

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Effects of wet grinding combined with chemical activation on the activity of iron tailings powder

Sustainable Use of Waste Oyster Shell Powders in a Ternary Supplementary Cementitious Material System for Green Concrete

Innovative methodology for comprehensive utilization of iron ore tailings: part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material.

Mechanism of Different Mechanically Activated Procedures on the Pozzolanic Reactivity of Binary Supplementary Cementitious Materials

Hydration characteristics investigation of iron tailings blended ultra high performance concrete: The effects of mechanical activation and iron tailings content

Bidirectional Catalysis Disintegration and Mineral Polymerization via Endogenous Iron(III) from Iron-Rich Sludge in Synergy with Waste Incineration Fly Ash