Abstract:Although Toyoura sand has been widely used as a standard material for physical model tests (particularly centrifuge model tests), its path-dependent stiffness degradation curves are rarely reported in the literature. This leads to difficulties in back-analyzing and understanding the physical tests involving significant changes in the direction of stress paths (such as unloading problems). In this study, path-dependent stiffness degradation curves of medium-dense Toyoura sand were determined by carrying out a series of stress-path triaxial tests, with local strain measurements. In the triaxial tests, four typical recent stress histories (changes of path direction = 0, 90, -90, and 180 degrees) were simulated. The measured small strain stiffnesses of Toyoura sand were then used to calibrate an advanced hypoplastic model that accounts for path-dependent soil stiffness at small strains. To justify the validity of the calibrated hypoplastic model and model parameters, a Type A numerical prediction and a centrifuge model test were carried out to simulate a typical unloading problem (i.e., excavation) in medium-dense Toyoura sand. Triaxial test results show that a 180 degrees reversal in the direction of the stress path increased the initial secant modulus of Toyoura sand by eight times. The path dependency of soil stiffness, however, vanished when the deviatoric strain exceeded 0.3%. The ground deformations (resulting from excavation) predicted by the numerical analysis show reasonable agreement with the measured data from the centrifuge test. This suggests the potential applicability of the calibrated soil model and its model parameters in predicting or back-analyzing other physical model tests in Toyoura sand.

A Simple Method for Triaxial Strain Path Testing

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

Stress path triaxial tests onK0-consolidated saturated soft clay

Development of constant strain increment ratio path tests

Application of Asaoka's Method in Multistage Triaxial Compression Testing of Normally Consolidated Soils

Monotonic and Cyclic Characteristics of K0-Consolidated Saturated Soft Clay under a Stress Path Involving a Variable Confining Pressure

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

A novel method for imitating true-triaxial stress path with conventional triaxial apparatus

One-Way Cyclic Triaxial Behavior of Saturated Clay: Comparison Between Constant and Variable Confining Pressure

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Verification of a novel stress path method by true-triaxial test

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Deformation behavior of K0-consolidated soft clay under traffic load-induced stress paths

Deformation Characteristics of Overconsolidated Clay Sheared under Constant and Variable Confining Pressure

Stress Dilatancy of Natural Soft Clay under an Undrained Creep Condition

Strain and pore pressure development on soft marine clay in triaxial tests with a large number of cycles

Triaxial Compression Tests of QH-E Lunar Soil Simulant under Constant Mean Principal Stress Path Using Discrete Element Method Simulations