Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

Boundary Element Method for Wave Propagation and Attenuation with Bottom Friction

An Effective Boundary Element Model to Calculate the Interaction Between Waves and Flexible Membrane

Numerical Comparison of Two Boundary Element Methods for Plane Harmonic Functions

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

The Boundary Contour Method for Magneto-Electro-Elastic Media with Linear Boundary Elements

Modified BEM for scattering analysis by a flaw at interface in an anisotropic multi-layered plate

An Adaptive Scaled Boundary Finite Element Method by Subdividing Subdomains for Elastodynamic Problems

AN EFFICIENT H-ADAPTIVE SCALED BOUNDARY ELEMENT METHOD FOR TRANSIENT ELASTODYNAMICS

Application of a Closed-Form Model in Analyzing the Fracture of Quasi-Brittle Materials

Time Domain BEM for Wave Propagationproblems in Layered Media and Experimental Verifications

Boundary Element Method for 2d Solids with Fluid-Filled Pores

Modeling of Sound Propagation in the Vicinity of Rigid Porous Ground by Boundary Element Method

An Efficient Approach for Simulating Wave Propagation with the Boundary Element Method in Multilayered Media with Irregular Interfaces

Iterative dual BEM solution for water wave scattering by breakwaters having perforated thin plates

Elastic One-Return Boundary Element Method and Hybrid Elastic Thin-Slab Propagator for Strong-Contrast Media with Sharp Boundaries

FM-BEM Evaluation for Effective Elastic Moduli of Microcracked Solids

Some Recent Investigations on the Application of Boundary Element Methods

Three dimensional modified BEM analysis of forward scattering problems in elastic solids

Infinite Boundary Elements for Dynamic Problems of 3‐D Half Space

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

Boundary Element Method for non-adhesive and adhesive contacts of a coated elastic half-space