Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

First Principles Calculation of Elastic Properties of Solid Argon at High Pressures

First-principle Calculations of the Structure and Elastic Properties of GaAs under Pressure

The first-principles calculations for the elastic properties of Zr2Al under compression

First-Principle Calculations of Elastic Properties of Wurtzite-Type Aluminum Nitride under Pressure

First-Principle Calculations for Elastic and Thermodynamic Properties of Diamond

First-Principles Calculations for Elastic Properties of ZnS under Pressure

First-Principles Study of High-Pressure Behavior of Solid β-HMX

Brillouin Scattering Studies Of Liquid Argon At High Temperatures And High Pressures

Ab Initio Calculation of Lattice Dynamics and Thermodynamic Properties of Beryllium

First-principle calculations of the structural phase transition and elastic properties of NaCl at high pressure

Ab initio calculations of elastic constants and thermodynamic properties of Li2O for high temperatures and pressures

First-Principles Calculations of Elastic Constants of Superconducting MgB 2

Strength, Anisotropy, and Preferred Orientation of Solid Argon at High Pressures.

Elastic Constants and Anisotropy of RuB2under Pressure

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

The Equation of State of Dense Argon: A Comparison of Shock and Static Studies

First-principles calculations of pure elements: Equations of state and elastic stiffness constants

Anisotropy in Elasticity and Physical Properties of Ti2B under High Pressure

The Structural, Elastic, Electronic Properties And Debye Temperature Of D0(22)-Ni3v Under Pressure From First-Principles

Elastic properties and phase stability of AgBr under pressure

First-principle Study of Solid Neon under High Compression