Discussion to Gas Mining in Horizontal Well with Ultra-Short Radius

Hou Yu

2005-01-01

Abstract:Giving introduction to ultra-short radius radial drilling system about its basic theory and construction method, the paper tries to introduce the system which is new technology in mining industry into gas mining industry as a new technical means so as to improve gas extracting capacity

What problem does this paper attempt to address?

Inquiry into Gas Mining with Ultrashort Radial Radial System

Hou Yu

2005-01-01

Abstract:Ultrashort Radial Radial System (URRS) can turn vertical to level in shaft section of 0 3m radius, make the horizontal well enter the target stratum accurately. By using the high_pressure jet, the hole of horizontal well is formed. URRS overcomes the difficulty of exerting pressure and solves a series of drill pipes rotary problems, and reduces the accident in the well and improves the speed of the well drilling. According to the detailed introduction to the basic principle and the mining method of URRS, USSR, as a new technical measure,is imported to mine gas so as to improve extracting quantity.
Key Technologies for Drilling and Completing Horizontal Wells with Ultra Long Horizontal Section of Sulige Tight Gas Reservoir

Shi Peiming,Wang Xuefeng,NI Huafeng,Wang Wanqing,Qu Yanping,Shi Chongdong

DOI: https://doi.org/10.11911/SYZTJS.2021056

2021-10-01

Abstract:Aiming at the technical difficulties such as high circulating pump pressure, high friction torque, low ROP, difficulty in hole cleaning and running in completion casing string running in the ultra-long horizontal section of tight gas reservoir in Sulige Gas Field, this paper analyzes the drilling technical difficulties in the ultra-long horizontal section from the aspects of safe extension of the long horizontal section, hole cleaning, friction and drag reduction and safe running of the completion string, such as optimized allocation of high-efficiency drilling equipment, optimized design of well trajectory, optimized application of drilling acceleration tools, RSS technology, high-efficiency, strong inhibition lubrication water-based drilling fluid and rotary guide shoe + casing floating running technology. The key technologies of drilling and completing ultra long horizontal well for tight gas reservoir in Sulige Gas Field have been formed, which have been applied in 2 wells, with an average well depth of 7 027 m, an average horizontal section length of 3 719.5 m, and drilling cycle of 50.93 d. Between them, Jing50-26H1 Well, TD depth is 7 388 m with horizontal section length of 4 118 m, created two records of the deepest well in Changqing Oilfield and the longest horizontal section of onland oil and gas wells in China. The research and application show that the key technologies provide technical support for efficient exploration and development of tight gas reservoir in Sulige Gas Field, and also provide reference for safe and efficient drilling of ultra long horizontal section well in domestic tight gas field.

Engineering,Environmental Science,Geology
Research and Application of Segmented Acid Fracturing Technology in Horizontal Wells of Ultra Deep Carbonate Gas Reservoirs in Southwest China

Yang Wang,Changlin Zhou,Huali Zhang,Tingting He,Xinyuan Tang,Huan Peng,Hongming Fang,Le Luo,Shu Gang

DOI: https://doi.org/10.2523/iptc-21445-ms

2021-03-16

Abstract:Abstract The Shuangyu gas reservoir in Southwest China is a fracture ultra deep carbonate gas reservoir. Its reservoir buried depth is more than 7000m, and the reservoir temperature is about 160°C. In the early stage, the vertical well acid fracturing method was used to obtain the natural gas production, but the gas production decreased rapidly after acid fracturing, which is difficult to achieve economic and efficient development. Segmented acid fracturing of horizontal wells is an effective way to greatly increase gas production. However, segmented acid fracturing of horizontal wells in Shuangyu ultra deep carbonate gas reservoir faces the following problems: (1)High reservoir temperature, fast acid rock reaction speed and short length of acid corrosion fracture. (2) The diameter of horizontal well is small (114.3mm), packer and other tools can not be put into the wellbore. In this paper, through laboratory tests, an acid fracturing fluid with temperature resistance of 160 °C and friction resistance of 35% of water is developed. The fracturing fluid has the characteristics of high viscosity and high concentration of hydrogen ions, which can not only fracture the formation, but also carry out effective acid etching on the fracture during the injection process. Through the experiment, the temporary plugging agent which can meet the temperature of 160 °C and the combination of temporary plugging agent can form a sealing layer in the fracture with the width of 4mm, and the maximum sealing pressure can reach 20MPa. The research results have been successfully applied in well y616. After fracturing, the daily output of natural gas in well Y616 is 1 million cubic meters, which is more than three times that of the surrounding vertical wells.
«Two Wide and One High» 3D Horizontal Well Real Time Steering Technology and Its Application in Engineering Field

Yijun Wang,Yijun Zhou,Xuegang Wang,Shixiang Fei,Yadong Zhang,Yabin Guo,Junjie Chen,Rui Zhang,Wang, Yijun

DOI: https://doi.org/10.1007/s10553-023-01585-7

2023-10-03

Chemistry and Technology of Fuels and Oils (English translation of Khimiya i Tekhnologiya Topliv i Masel)

Abstract:The tight sandstone gas reservoir is thin, highly heterogeneous, and its spatial distribution is very complex. Its development is faced with the problems of low gas reservoir drilling rate and poor fracturing effect. In order to overcome the difficulties in the development of horizontal wells in tight gas reservoirs, the real-time steering technology of seismic geological integration horizontal wells based on 3D seismic data of "two wide and one high" is proposed in this paper. The pilot test of 12 horizontal wells has been completed using the proposed technology. The average horizontal section length is 1755 meters, the sandstone length is 1506 meters, the sandstone drilling rate is 85.7%, the effective reservoir length is 1290 meters, the effective reservoir drilling rate is 74.5%, the coincidence rate of seismic prediction is 91.7%, the success rate of one shot is 100%, and the structural prediction error is 0.45 ‰. This technology can effectively improve the drilling rate and fracturing effect of horizontal wells in tight sandstone gas reservoirs, and has guiding significance for the development of horizontal wells in tight sandstone gas reservoirs.
The Key Technologies of Ultra-Deep Hpht Horizontal Wells and Its Application in Shunbei Oilfield of SINOPEC

Binzhen Bai,Yijin Zeng,Xin Lu,Hongning Zhang,Zhifa Wang,Long Wang,Haobo Zhou,Eduardo David Gramajo Silva,Rached Rached Maurice

DOI: https://doi.org/10.2523/iptc-22141-ms

2022-02-21

Abstract:Abstract There was nearly 1.7 billion tons proved reserve in SINOPEC Shunbei oilfield, which is the deepest (>8000m) fault controlled marine carbonate oilfield in the world with high-temperature (>170 °C) and high -pressure (>140MPa). The formation geological conditions are complicated, high rock strength, easy leakage and collapse, multiple pressure systems co-exist in the slim borehole, which caused a series of directional drilling technical problems such as difficulty in controlling the tool surface, PDM build-up capacity prediction and so on. Therefore, the related research for ultra-deep direction drilling technology were carried out aiming at solving the directional drilling problem for Shunbei oilfield. Firstly, the optimized wellbore structure scheme design method was proposed, in which the geological characteristics, borehole size and the directional efficiency were considered. And then a double augmented well profile designed model was established based on optimizing the production casing size, through which the directional efficiency and the drilling rate of a trip were increased significantly, and the nonproductive time can be greatly reduced easily. Secondly, an ultra-deep directional well torque transmission prediction model was established based on the mechanical analysis of ultra-deep drilling string and based which a rapid tool face control method was formed. Furthermore, an innovative build-up rate prediction method was established based on both big Data analysis and balanced tendency build-up rate prediction method, and the accuracy is more than 90%. Moreover, the PDM rubber seal, stator and rotor dimensions are optimized to achieve high power output within a certain high temperature range to prolong the service life according to the wellbore temperature field. Finally, the optimization of high temperature MWD instrument and matching process technology was proposed, such as surface assisted cooling, borehole size enlarging and high displacement cooling technology effectively improve the reliability. The series of ultra-deep directional drilling technology has been applied in Shunbei oilfield. The field application results show that the average ROP of directional section is increased by more than 30%, directional efficiency is greatly improved, and the directional drilling cycle is shortened by more than 20%. Nearly 40 ultra-deep directional wells above 8000m have been constructed, setting more than 10 new Asia records of petroleum engineering onshore directional well. There are two innovations in this paper. The first is to put forward the design method of wellbore profile with the shortest drilling time as the goal, which can save 1-2 trips and improve the directional efficiency by more than 20%. The second is to introduce the prediction method of build-up rate based on borehole tendency angle, which improves the prediction accuracy of build-up rate by 28% in Shunbei ultra deep directional well.
Research on Hydraulic Fracturing Technology of Long Boreholes along Strata of High Vast Thick Coal Seam

Chenyang Wang,Shugang Li,Li Liu,Le Liu

DOI: https://doi.org/10.1155/2024/6305640

IF: 1.843

2024-03-08

Advances in Civil Engineering

Abstract:Gas extraction is a major technique for regional gas regulation and coal and gas comining in China. Assuring effective gas extraction operations is a crucial step in ensuring the supply of energy. The effect range of extraction drilling, pressure relief degree, and standard period of gas extraction are all constrained because of the geological constraints affecting coal gas permeability and occurrence. Combined with the advantages of directional drilling and high-efficiency pumping technology and antireflection enhanced pumping technology of hydraulic fracturing, directional long-drilling hydraulic fracturing can effectively improve the efficiency of gas control and expand the scale of gas control. The present study focuses on the exploration of directional long-hole hydraulic fracturing technique in thick coal seams with high gas content using Dafosi Mine as a case study. The research findings demonstrate that hydraulic fracturing contributes to the enlargement of pore size, pore density, and pore connectivity in coal seams. In-depth research was conducted on the expansion of coal seam fractures during the hydraulic fracturing process using the RFPA3D-flow numerical simulation program. Additionally, a comprehensive analysis of stress distribution around the fractures under the flow-solid coupling condition was performed. To further improve the effectiveness of hydraulic fracturing technique, the research team optimized the fracturing tools and construction processes in the four coal seams of Dafosi Mine. The impact of segmented hydraulic fracturing in coal seam bare hole drilling was also studied. Furthermore, an investigation method specific to the coal seam bare hole segmented hydraulic fracturing effects applicable to Dafosi Mine was developed. The maximum fracture extension pressure, minimum fracture closure pressure, and fracture morphology change characteristics during drilling and fracturing were measured, and the fracturing influence radius of coal seam was determined to be 46−58 m, the gas extraction concentration after fracturing increased by 2.20–4.22 times, and the 100-m extraction flow increased by 4.93–11.03 times. It gives other mines technical assistance so they can keep advocating and utilizing the horizontal directional long-drilling stage hydraulic fracturing technique.

construction & building technology,engineering, civil
Research on Gas Extraction Technology of Directional Long Borehole in Ultrathick Coal Seam

Yaobin Li,Tao Jiang,Xin Guo

DOI: https://doi.org/10.1155/2022/6957896

IF: 2.006

2022-03-14

Geofluids

Abstract:Gas extraction is an important way to control gas disasters. The effect of traditional gas extraction drilling on ultrathick coal seam is not well. In order to improve the rate of gas extraction, directional long drilling is used to replace conventional drilling for coal seam gas extraction. Through the combination of numerical simulation and field experimentation, the stress distribution around borehole is analyzed, and the influence of different time, different gas pressure, different negative pressure of extraction, and different permeability of coal body on directional borehole is simulated. According to the experimentation of Baode Mine, the data of gas drainage volume of conventional directional drilling are recorded and analyzed. The results indicate that the directional drilling is more suitable for Baode Mine 81306 working face of coal seam 8 gas extraction operation. Directional drilling is better than conventional drilling in work, with good drainage stability and large gas drainage volume, which can greatly reduce the outburst time and improve the gas drainage rate.

geochemistry & geophysics,geology
Theoretical Progress and Key Technologies of Onshore Ultra-Deep Oil/Gas Exploration

Xusheng Guo,Dongfeng Hu,Yuping Li,Jinbao Duan,Xuefeng Zhang,Xiaojun Fan,Hua Duan,Wencheng Li

DOI: https://doi.org/10.1016/j.eng.2019.01.012

IF: 12.834

2019-06-01

Engineering

Abstract:<p>Oil/gas exploration around the world has extended into deep and ultra-deep strata because it is increasingly difficult to find new large-scale oil/gas reservoirs in shallow to middle buried strata. In recent years, China has made remarkable achievements in oil/gas exploration in ultra-deep areas including carbonate and clastic reservoirs. Some (ultra) large-scale oil and gas fields have been discovered. The oil/gas accumulation mechanisms and key technologies of oil/gas reservoir exploration and development are summarized in this study in order to share China's experiences. Ultra-deep oil/gas originates from numerous sources of hydrocarbons and multiphase charging. Liquid hydrocarbons can form in ultra-deep layers due to low geothermal gradients or overpressures, and the natural gas composition in ultra-deep areas is complicated by the reactions between deep hydrocarbons, water, and rock or by the addition of mantle or crust-sourced gases. These oils/gases are mainly stored in the original high-energy reef shoal complexes or in sand body sediments. They usually have high original porosity. Secondary pores are often developed by dissolution, dolomitization, and fracturing in the late stage. The early pores have been preserved by retentive diagenesis such as the early charging of hydrocarbons. Oil/gas accumulation in ultra-deep areas generally has the characteristics of near-source accumulation and sustained preservation. The effective exploration and development of ultra-deep oil/gas reservoirs depend on the support of key technologies. Use of the latest technologies such as seismic signal acquisition and processing, low porosity and permeability zone prediction, and gas-water identification has enabled the discovery of ultra-deep oil/gas resources. In addition, advanced technologies for drilling, completion, and oil/gas testing have ensured the effective development of these fields.</p>

engineering, multidisciplinary
Status, Experience, and Inspiration of Unconventional Resources Hydraulic Fracturing Technology

Li Jie,Li Shuai,Li Jianmin,Li Jiacheng,Yi Xinbin,Wang Mingxing,Tian Gang,Wang Junchao

DOI: https://doi.org/10.2118/219141-ms

2024-01-01

Abstract:Abstract China's recoverable tight/shale oil resources amount up to 32 billion barrels, and 92% of the newfound proven reserves are low/ultra low permeability or unconventional reserves. Complex sedimentary structure & geological conditions, deeper reservoir burial and worse reservoir characteristics, fast decline, low recovery and high cost these all make it very hard to develop these kinds of reservoirs. In this paper, we firstly introduced the geology and reservoir characteristics of unconventional tight/shale oil and tight/shale gas reservoir, compared with North America, the organic-rich shales in China are characterized by large burial depth (about 65% of the shales with a burial depth > 3,500 m), complex surface conditions, and variety of types of organic-rich shale. These characteristics determine that the resource characteristics of these shale oil and gas are different from those of the widely developed in the United States. We summarized the past 30 years’ progress of hydraulic fracturing technology, from vertical well acidizing, vertical well hydraulic fracturing, and horizontal well multi-stage multi-cluster hydraulic fracturing. Small well spacing, dense cutting and 5-6m length per clusters is the optimal artificial fracture spacing for this kind reservoir via Geo.-Eng. integrated fracturing design. Extreme Limited-Entry (XLE) perforation design, 3-8 perforation holes per cluster is best for equilibrium artificial fracture initiation, 6-8 clusters per stage and over 85% fractures can be opened via downhole cameral monitor. P’N’P completion method and soluble well downhole plugs, saving non-pumping time and reducing fracturing costs. Multifunctional fluids and reusable low-cost variable-viscosity slickwater, featured with imbibition mechanism and increase oil recovery. Low-cost quartz sands wildly be used to reduce costs. Factory style hydraulic fracturing mode, increase the fracturing efficiency and reduce on-site organizational costs. The integrated technologies have been widely applied in unconventional wells. Application of the integrated technologies and the experience can be references for the development of similar marginal reservoirs.
Breakthrough in drilling and completion equipment and key technologies for 8000m-class ultra-deep wells onshore China

Huohai Yang,Guotao Fan,Xin Jiang

DOI: https://doi.org/10.54097/hset.v25i.3510

2022-12-13

Abstract:With the exploration and development of a group of deep ultra-deep large oil and gas fields in Tarim basin and Sichuan Basin, deep oil and gas reservoirs will be the main productivity replacement area and the main exploration focus area. Drilling and completion still face severe challenges such as high temperature and high pressure, complex pressure systems, complex accidents and poor drillability. This paper describes the technology of domestic oil and gas fields with 8000m level drilling and completion. Considering the demand of exploration and development of local oil and gas fields while standardizing the international advanced level, the insufficiency of technology and equipment improvement demand of each block are discussed, and the research direction of technology and equipment is prospected.

Engineering,Environmental Science
Water-based drilling fluid for ultra-long horizontal intervals in Changqing oil and gas field

Jianqing Zhang,Zubiao Hu,Qin Zhang,Qingchen Wang,Huafeng Ni,Weiliang Wang,Luke Li,Chengfu Han

DOI: https://doi.org/10.1080/10916466.2022.2066692

IF: 1.695

2022-04-24

Petroleum Science and Technology

Abstract:In the past two years, several horizontal wells with ultra-long horizontal intervals were completed in Changqing oil and gas field. The longest horizon interval reached 4466 m, which set a record of the longest onshore horizontal well in Asia. There were a lot of difficulties such as high friction, mudstone collapse, and sand carrying that puzzled the drilling of wells with ultra-long horizontal intervals. To solve these problems, some key treatment agents were screened to form a novel water-based drilling fluid system (CQSP-RH). The yield point and extreme pressure lubrication coefficient of the novel system were 18 Pa and 0.058, respectively. The filtrate volume of the novel system was only 1.9 mL at room temperature and was 12 mL at 120 °C. When the cuttings were rolled for 16 h at 120 °C, the primary recovery of them could reach 98.64%. Subsequently, the novel system was applied to wells with ultra-long horizontal intervals. The friction resistance between drilling tools and sidewall was controlled within 500 KN; the solid contents of drilling fluid was controlled within 10%. The results proved that the novel system have superb properties and tremendous potential to drill deeper horizontal wells.

energy & fuels,engineering, chemical, petroleum
Application of the Unstructured Grids in the Numerical Simulation of Fractured Horizontal Wells in Ultra-Low Permeability Gas Reservoirs

Jiaoni Chen,Tiantai Li,Yi Zhang

DOI: https://doi.org/10.1016/j.jngse.2015.01.003

IF: 5.285

2015-01-01

Journal of Natural Gas Science and Engineering

Abstract:Given the impermeable lithological boundary problem of the Sulige Gas Field in China, this study validates the dynamic characteristics of this reservoir through a radial model of the vertical well and proposes an unstructured grid refinement technology using a perpendicular bisector, while considering the horizontal well fracturing model. The vertical fractures and impermeable lithological boundary around the horizontal well can be accurately simulated using the unstructured grid refinement technology. This study also investigates the influence of stress sensitivity on the development indices of an ultra-low permeability gas reservoir. Results show that an impermeable lithological boundary in a horizontal well can effectively decrease the production rate of the working system of intermittent open wells. For ultra-low permeability gas reservoir with different stress sensitivities, important aspects, such as stabilization period, economic benefits, and ultimate recovery, should be considered in the early production allocation of gas wells.
Preliminary Study on Gas Production Profile Logging Technology and Data Interpretation Method Used in Horizontal Wells

Xiaogang Zhang,Dongming Liu

2007-01-01

Abstract:With the extensive application of horizontal well technologies,the dynamic monitor of horizontal wells drew a wide attention gradually.Due to well deflection and its water content,the flow pattern was complex and variegated in horizontal gas wells.Nowadays the dynamic monitor of horizontal gas well is not started.Based on the flow pattern analyses,some technical issues are studied in horizontal wells,such as conveying equipment,well logging equipment serial and security during gas production profile logging,an interpretation model of logging data is proposed,by means of multiphase flow simulation experiments in horizontal wells,the method to determine velocity profile emendation coefficient and slip velocity is researched.
Research and engineering practice of high-efficiency gas extraction technology by hydraulic fracturing: a case study of Huanglong Coalfield in China

Jingfei Zhang,Siqing Sun,Shugang Li,Dongdong Chen,Jizhan Zhao,Haifei Lin

DOI: https://doi.org/10.1007/s12517-022-10299-9

2022-05-19

Arabian Journal of Geosciences

Abstract:In view of the problems of rapid attenuation of concentration and flow rate and the small extraction influence radius in the process of gas extraction in Huanglong Coalfield, the evolution characteristics of in situ stress and coal compressive strength on hydraulic fracturing cracks in the study area were analyzed using RFPA 2D -Flow simulation software. A self-developed complete set of coal mine underground hydraulic fracturing equipment was also used to develop the high-efficiency gas extraction technology of the coal seam open-hole quick-sealing hydraulic fracturing. The engineering application test was conducted in No. 2 coal mine in Huanglong Coalfield. The findings suggest that the higher the in situ stress deviation and coal firmness coefficient are, the more the hydraulic fracturing crack direction tends to be single. Moreover, the coal seam fracture pressure in the test area should be 7.3–15.4 MPa. On the site, five directional long-hole drilling operations were completed, with a single-hole depth of 240–285 m and a single-hole maximum pumping pressure of 19 MPa. After fracturing, the concentrations of single-hole gas extraction and the pure quantity of 100 m extraction were increased by 0.720.5 and 1.79.8 times, respectively. The gas drainage effect was clearly improved, and the coal seam gas drainage ability was enhanced when the hydraulic fracturing and permeability enhancement methods were adopted.

geosciences, multidisciplinary
Research and Practice on Key Technology of Drilling Ultra-deep Horizontal Wells at Southeast Block in Gulf of Mexico

X. Meng,Lin Zhu,Wang Dou

Abstract:It is complicated for geologic condition at Southeast Block in the Gulf of Mexico, which has a serious impact on the scientificity of drilling design and pertinence and validity of drilling technical measures. Based on it, the paper explored the application of key techniques. For example, optimum design technique of deep wells and ultra-deep wells under complicated geologic condition, and oil base drilling fluid technique with high density, high temperature resistance and anti-pollution, and prevention and treatment techniques for complicated situation and accidents under wells. Another example cementing quality techniques of complicated formation intervals and small clearance, and special drilling techniques with advanced technical facilities. The series of techniques work very well at this block by resolving the drilling difficulties in complex situations (e.g. many pressure systems, long open whole, bad stability of well wall and high temperature and pressure during drilling, and bad possibility of drilling deep stratigraphic rock.) This research would be helpful for technical development of ultra-deep extended reach horizontal well at home and abroad.

Engineering,Environmental Science,Geology
Research and Application of Horizontal Well Volumetric Fracturing Technology

Guan Ziyue

DOI: https://doi.org/10.62517/jes.202402105

2024-03-01

Abstract:As an innovative technology in the current development of oil and gas fields, horizontal well volume fracturing technology plays a decisive role in the development of unconventional oil and gas reservoirs. By injecting high-pressure cracking fluid into the formation, this technology causes rock fracture to form a complex fracture network, greatly expanding the flow path of oil and gas from the reservoir to the wellhead, and effectively improving the oil and gas recovery. The scientific principle behind horizontal well volumetric fracturing technology is deeply discussed, and the key technical parameters of the technology are analyzed in detail, such as the property of fracturing fluid, the formation and propagation of fractures, and the precise control of fracturing operation. At the same time, the technical challenges and environmental risks encountered in the actual operation of horizontal well volume fracturing technology are discussed, and specific countermeasures and optimization methods are put forward. Through the analysis of several examples, the significant effects of horizontal well volume fracturing technology in improving the development efficiency and reducing the development cost of unconventional oil and gas fields are demonstrated, and its future application prospect and development direction are prospected, emphasizing the importance of continuous technological innovation in realizing the efficient development of unconventional resources.
Multi-step Fracturing Radial Boreholes for Efficient Development of Unconventional Gas Reservoirs

Tianyu Wang,Zhaoquan Guo,Zhengchao Ma,Yuning Yong,Gensheng Li,Shouceng Tian

DOI: https://doi.org/10.1007/s00603-023-03699-0

IF: 6.518

2024-01-26

Rock Mechanics and Rock Engineering

Abstract:Radial borehole fracturing is a production method that combines ultrashort radius radial boreholes with hydraulic fracturing, which is expected to effectively improve the drainage and transformation effect of tight oil and gas reservoirs. In view of the problem that radial boreholes cannot be fully fractured when high-pressure liquids are injected into them simultaneously, this paper proposes a new method of fracturing the radial boreholes step by step, and this method is verified by the laboratory fracturing experiments. It designed and processed wellbores with both internal and external pipes, conducted 24 sets of radial boreholes step-by-step experiments of double-layer radial boreholes, analyzed the reproducibility of the experimental results, and compared the results of fracturing radial boreholes simultaneously and fracturing radial boreholes step-by-step experiments. The results show that this method can fracture two sets of radial boreholes distributed in different vertical planes. The results demonstrate that this method is feasible and can solve the problem that not all the radial boreholes are fractured when fracturing fluids are simultaneously injected into them. Besides, the azimuth is the key factor affecting fracture geometries. When the azimuths are 0° and 30°, the fractures can cut through radial boreholes in different layers within the rock samples. If the radial boreholes with larger azimuths are fractured, it will generate higher breakdown pressures. Fracturing radial boreholes with smaller azimuths first and then radial boreholes with larger azimuths should be selected. This study provides a theoretical basis for the field application of radial borehole fracturing technology.

geosciences, multidisciplinary,engineering, geological
Experimental Investigation of Hydraulic Fracturing for Multi-type Unconventional Gas Co-exploitation in Ordos Basin

Peng Tan,Yan Jin,Bin Hou,Liang Yuan,Zhenyu Xiong

DOI: https://doi.org/10.1007/s13369-019-03974-9

IF: 2.807

2019-07-09

Arabian Journal for Science and Engineering

Abstract:The accumulated gas production and production cycle would be significantly increased by exploiting the unconventional gas resources of coalbed methane and tight gas jointly in coal measure strata (tight gases–coal interbedding reservoir) in Ordos Basin in China. However, whether hydraulic fractures could connect multiple gas zones effectively in the vertical plane is a key problem. To study hydraulic fracture geometries and vertical propagation rules for coal measure strata, six groups of true triaxial experiments in natural outcrops collected from the eastern margin of Ordos Basin in China were carried out. Results show that unlike conventional symmetric fracture geometry in layered media, the principle of fracture vertical propagation in coal measure strata follows the least resistance and most preferential propagation path. The natural fractures and cleats in coal seam make the overall fracture morphology asymmetric. A moderate stress difference between vertical stress and maximum horizontal stress (4 MPa in this paper) is the key for connection of multiple layers as well as SRV enhancement. Developed natural fractures and bedding planes in interlayer could alter fracture extension path and impede hydraulic fracture crossing layer interface. In the process of hydraulic fracture propagating from interlayer to layer interface and then to the coal seam, the fluid pressure in hydraulic fractures is characterized by an apparent fluctuation of decreasing first and increasing later. Furthermore, the greater the elastic modulus of the interlayer, the greater the pump pressure fluctuations.

multidisciplinary sciences
A Review of Shale Gas Exploitation Technology

Xiang Rong Luo,Shu Zhong Wang,Ze Feng Jing,Ming,Zhi Guo Wang,Zhen De Zhai,Yu Peng Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amm.675-677.1485

2014-01-01

Applied Mechanics and Materials

Abstract:The United States has taken the lead to achieve the shale gas industrial production and created a shale gas revolution throughout the world. According to the exploitation experience of the United States, the key of shale gas business development realization is to adopt horizontal well combined with fracturing technology. At present fracturing technology used commonly include multi-stage fracturing, water fracturing, refracturing, etc. China has great potential in shale gas resource, recoverable resources has 25.08×1012m3, but they are mainly located in the drought and water lack area, and the clay mineral content for shale gas reservoir is higher, the traditional water-based fracturing fluid used for shale gas development caused a lot of water consumption and serious reservoir damage, therefore, it is not suitable for shale gas reservoir conditions in China. In the process of domestic shale gas development, exploring novel fracturing and development technology is irreversible.
Extreme massive hydraulic fracturing in deep coalbed methane horizontal wells: A case study of the Linxing Block, eastern Ordos Basin, NW China

YANG Fan,LI Bin,WANG Kunjian,WEN Heng,YANG Ruiyue,Zhongwei HUANG,Fan YANG,Bin LI,Kunjian WANG,Heng WEN,Ruiyue YANG

DOI: https://doi.org/10.1016/s1876-3804(24)60035-2

IF: 5.194

2024-04-18

Petroleum Exploration and Development

Abstract:Deep coal seams show low permeability, low elastic modulus, high Poisson's ratio, strong plasticity, high fracture initiation pressure, difficulty in fracture extension, and difficulty in proppants addition. We proposed the concept of large-scale stimulation by fracture network, balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane (CBM) horizontal wells. This technique involves massive injection with high pumping rate + high-intensity proppant injection + perforation with equal apertures and limited flow + temporary plugging and diverting fractures + slick water with integrated variable viscosity + graded proppants with multiple sizes. The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block, eastern margin of the Ordos Basin. The injection flow rate is 18 m 3 /min, proppant intensity is 2.1 m 3 /m, and fracturing fluid intensity is 16.5 m 3 /m. After fracturing, a complex fracture network was formed, with an average fracture length of 205 m. The stimulated reservoir volume was 1 987×10 4 m 3 , and the peak gas production rate reached 6.0×10 4 m 3 /d, which achieved efficient development of deep CBM.

energy & fuels,geosciences, multidisciplinary,engineering, petroleum

Discussion to Gas Mining in Horizontal Well with Ultra-Short Radius

Inquiry into Gas Mining with Ultrashort Radial Radial System

Key Technologies for Drilling and Completing Horizontal Wells with Ultra Long Horizontal Section of Sulige Tight Gas Reservoir

Research and Application of Segmented Acid Fracturing Technology in Horizontal Wells of Ultra Deep Carbonate Gas Reservoirs in Southwest China

«Two Wide and One High» 3D Horizontal Well Real Time Steering Technology and Its Application in Engineering Field

The Key Technologies of Ultra-Deep Hpht Horizontal Wells and Its Application in Shunbei Oilfield of SINOPEC

Research on Hydraulic Fracturing Technology of Long Boreholes along Strata of High Vast Thick Coal Seam

Research on Gas Extraction Technology of Directional Long Borehole in Ultrathick Coal Seam

Theoretical Progress and Key Technologies of Onshore Ultra-Deep Oil/Gas Exploration

Status, Experience, and Inspiration of Unconventional Resources Hydraulic Fracturing Technology

Breakthrough in drilling and completion equipment and key technologies for 8000m-class ultra-deep wells onshore China

Water-based drilling fluid for ultra-long horizontal intervals in Changqing oil and gas field

Application of the Unstructured Grids in the Numerical Simulation of Fractured Horizontal Wells in Ultra-Low Permeability Gas Reservoirs

Preliminary Study on Gas Production Profile Logging Technology and Data Interpretation Method Used in Horizontal Wells

Research and engineering practice of high-efficiency gas extraction technology by hydraulic fracturing: a case study of Huanglong Coalfield in China

Research and Practice on Key Technology of Drilling Ultra-deep Horizontal Wells at Southeast Block in Gulf of Mexico

Research and Application of Horizontal Well Volumetric Fracturing Technology

Multi-step Fracturing Radial Boreholes for Efficient Development of Unconventional Gas Reservoirs

Experimental Investigation of Hydraulic Fracturing for Multi-type Unconventional Gas Co-exploitation in Ordos Basin

A Review of Shale Gas Exploitation Technology

Extreme massive hydraulic fracturing in deep coalbed methane horizontal wells: A case study of the Linxing Block, eastern Ordos Basin, NW China