Self-Doped Ti3+ Enhanced Photocatalyst for Hydrogen Production under Visible Light.

Fan Zuo,Le Wang,Wu Tao,Zhenyu Zhang,Dan Borchardt,Pingyun Feng

DOI: https://doi.org/10.1002/chin.201049012

2010-01-01

ChemInform

Abstract:TiO2-x is prepared by combustion of an EtOH solution containing HCl, Ti(OiPr)4, and 2-ethylimidazole at 500 °C in air followed by annealing for 5 h.

What problem does this paper attempt to address?

Self-Doped Ti3+ Enhanced Photocatalyst for Hydrogen Production under Visible Light

Fan Zuo,Le Wang,Tao Wu,Zhenyu Zhang,Dan Borchardt,Pingyun Feng

DOI: https://doi.org/10.1021/ja103843d

IF: 15

2010-01-01

Journal of the American Chemical Society

Abstract:Through a facile one-step combustion method, partially reduced TiO2 has been synthesized. Electron paramagnetic resonance (EPR) spectra confirm the presence of Ti3+ in the bulk of an as-prepared sample. The UV-vis spectra show that the here extends the photoresponse of TiO2 from the UV to the visible light region, which leads to high visible-light photocatalytic activity for the generation of hydrogen gas from water. It is worth noting that the Ti3+ sites in the sample are highly stable in air or water under irradiation and the photocatalyst can be repeatedly used without degradation in the activity.
Carbon Coating Stabilized Ti3+-doped TiO2 for Photocatalytic Hydrogen Generation under Visible Light Irradiation

Gao Fu,Peng Zhou,Meiming Zhao,Weidong Zhu,Shicheng Yan,Tao Yu,Zhigang Zou

DOI: https://doi.org/10.1039/c5dt01204j

IF: 4

2015-01-01

Dalton Transactions

Abstract:Self-doping by Ti3+ is a useful method to expand the light response of TiO2 into the visible light region. However, to obtain a stable Ti3+-doped TiO2 seems to be a challenge due to the easy oxidation of Ti3+ during the heterogeneous reaction. Here, we propose a simple carbon coating route to stabilize the Ti3+-doped TiO2, in which both the Ti3+ and precursor of the carbon coating layer were in situ formed from the hydrothermal hydrolysis of titanium isopropoxide. The carbon coated Ti3+-doped TiO2 exhibited excellent stability for photocatalytic hydrogen production. Based on electron paramagnetic resonance (EPR) analysis, the proposed stabilizing mechanism is that the conductive carbon coating layer as a barrier layer prevents the H2O and O-2 from diffusing into the surface of the photocatalyst, which can oxidize the surface O vacancies and Ti3+ in TiO2. Our findings offer a simple route to prepare a highly stable TiO2-based photocatalyst with visible light response.
Enhanced UV Photoactivity of Ti3+ Self-Doped Anatase TiO2 Single Crystals Hydrothermally Synthesized Using Ti-H2O2-HF Reactants

Huan Xing,Wei Wen,Jin-Ming Wu

DOI: https://doi.org/10.1016/j.jphotochem.2019.111958

IF: 5.141

2019-01-01

Journal of Photochemistry and Photobiology A Chemistry

Abstract:Colored Ti3+ self-doped TiO2 has been widely studied to achieve visible-light induced photocatalytic activity. In this study, we used a mixed aqueous solution of H2O2 and HF to oxidize metallic Ti powders under a hydrothermal condition, which achieved successfully Ti3+ self-doped anatase TiO2 single crystals. The self-doping level can be tuned simply by adjusting the amount of Ti powders in the reactant. As a photocatalyst to remove phenol in water, the self-doped TiO2 crystals exhibited negligible photoactivity under visible light illumination; however, under the UV light irradiation, the reaction rate constant recorded for the light blue TiO2 was 5 times that of the white one. Appropriate self-doping of TiO2 is thus beneficial for the UV light photoactivity.
Octahedral Shaped PbTiO 3 -TiO 2 Nanocomposites for High-Efficiency Photocatalytic Hydrogen Production.

Simin Yin,Shun Liu,Yongfeng Yuan,Shaoyi Guo,Zhaohui Ren

DOI: https://doi.org/10.3390/nano11092295

2021-01-01

Abstract:In this work, octahedral shaped PbTiO-TiO nanocomposites have been synthesized by a facile hydrothermal method, where perovskite ferroelectric PbTiO nanooctahedra were employed as substrate. The microstructures of the composites were investigated systemically by using XRD, SEM, TEM and UV-Vis spectroscopy. It was revealed that anantase TiO nanocrystals with a size of about 5 nm are dispersed on the surface of the {111} facets of the nanooctahedron crystals. Photocatalytic hydrogen production of the nanocomposites has been evaluated in a methanol alcohol-water solution under UV light enhanced irradiation. The H evolution rate of the nanocomposites increased with an increased loading of TiO on the nanooctahedra. The highest H evolution rate was 630.51 μmol/h with the highest concentration of TiO prepared with 2 mL tetrabutyl titanate, which was about 36 times higher than that of the octahedron substrate. The enhanced photocatalytic reactivity of the nanocomposites is possibly ascribed to the UV light absorption of the nanooctahedral substrates, efficient separation of photo-generated carriers via the interface and the reaction on the surface of the TiO nanocrystals.
In situ surface hydrogenation synthesis of Ti3+ self-doped TiO2 with enhanced visible light photoactivity.

Junchao Huo,Yanjie Hu,Hao Jiang,Chunzhong Li

DOI: https://doi.org/10.1039/c4nr00972j

IF: 6.7

2014-01-01

Nanoscale

Abstract:A novel one-step, vapor-fed aerosol flame synthetic process (VAFS) has been developed to prepare Ti3+ self-doped titanium dioxide (TiO2). The freshly formed TiO2 was in situ surface hydrogenated during the condensation stage by introducing H-2 above the flame, and Ti3+ ions were created near the surface of TiO2. The relative content of Ti3+ ions near the surface of TiO2 is estimated to be 8%. Because of the high absorption of visible light and suppression of charge recombination, the photocurrent density and decomposition of MB under visible light irradiation were remarkably enhanced. This study demonstrates a simple, potential method to produce Ti3+ self-doped TiO2 with effective photoactivity in visible light.
Massive Ti3+ Self-Doped by the Injected Electrons from External Pt and the Efficient Photocatalytic Hydrogen Production under Visible-Light

Yurong Yang,Peng Gao,Xiaochen Ren,Linna Sha,Piaoping Yang,Jianjiao Zhang,Yujin Chen,Lei Yang

DOI: https://doi.org/10.1016/j.apcatb.2017.07.014

2017-01-01

Abstract:Ti3+ doping in TiO2 photocatalysthas attracted much attention due to its enhanced visible-light absorption and the decreased carrier recombination. However, the introduction of massive stable Ti3+ is still a great challenge because Ti3+ is easy to be oxidized in air. In this work, for the first time, a negatively charged core/shell TiO2/C nanostructure is prepared and then Pt-0 atoms reduced by NaBH4 are loaded on its surface. Through a tracking test of the product's Zeta potential, XPS and FTIR measurements, it is found that the reductive electrons are produced due to the reaction between C and metal Pt, in which Pt exhibits a +2 chemical valence. And the lost electrons by Pt are transferred into the interior TiO2 through the carbon shell and reduce Ti4+ to Ti3+. This method avoids Ti3+ ions' exposing to air and overcomes the complex coating process for isolating oxygen, and provides a new facile one for efficiently Ti3+ self-doping. Through the following measurements, such as XPS, PL, EPR and Raman etc., it is proved that massive Ti3+ ions are formed in the interior TiO2, which greatly narrows the composite's band-gap (from 3.11 eV to 2.47 eV) and enhances the visible-light absorption. As a result, the as-obtained sample exhibits a larger carrier densities (13.9 x 10(18) cm(-3)) and a higher photocatalytic activity under visible-light irradiation compared with those in other literatures: the rate of photocatalytic water splitting for H-2 generation is up to 8117 mu mol h(-1) g(-1). (C) 2017 Elsevier B.V. All rights reserved.
Engineering a Self-Grown TiO2 /Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

Xiaoyu He,Yujia Ding,Zhennan Huang,Min Liu,Miaofang Chi,Zili Wu,Carlo U Segre,Chunshan Song,Xiang Wang,Xinwen Guo

DOI: https://doi.org/10.1002/anie.202217439

2023-06-19

Abstract:A photocatalyst TiO2 /Ti-BPDC-Pt is developed with a self-grown TiO2 /Ti-metal-organic framework (MOF) heterojunction, i.e., TiO2 /Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO2 /Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g-1 h-1 compared to other TiO2 - or MOF-based catalysts. The structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.
Development of copper-doped TiO2 photocatalyst for hydrogen production under visible light

L.S. Yoong,F.K. Chong,Binay K. Dutta

DOI: https://doi.org/10.1016/j.energy.2009.07.024

IF: 9

2009-10-01

Energy

Abstract:The advantage of copper doping onto TiO2 semiconductor photocatalyst for enhanced hydrogen generation under irradiation at the visible range of the electromagnetic spectrum has been investigated. Two methods of preparation for the copper-doped catalyst were selected – complex precipitation and wet impregnation methods – using copper nitrate trihydrate as the starting material. The dopant loading varied from 2 to 15%. Characterization of the photocatalysts was done by thermogravimetric analysis (TGA), temperature programmed reduction (TPR), diffuse reflectance UV-Vis (DR-UV-Vis), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Photocatalytic activity towards hydrogen generation from water was investigated using a multiport photocatalytic reactor under visible light illumination with methanol added as a hole scavenger. Three calcination temperatures were selected – 300, 400 and 500°C. It was found that 10wt.% Cu/TiO2 calcined at 300°C for 30min yielded the maximum quantity of hydrogen. The reduction of band gap as a result of doping was estimated and the influence of the process parameters on catalytic activity is explained.

energy & fuels,thermodynamics
Competition Between Oxidation and Anti-Oxidation to Guarantee Visible Light Activity for a TiO2–x Photocatalyst from the Dissolution of Ti0

Jinghui Jiang,Han Zhou,Jian Ding,Fan Zhang,Tongxiang Fan,Di Zhang

DOI: https://doi.org/10.1016/j.ijhydene.2015.05.115

IF: 7.2

2015-01-01

International Journal of Hydrogen Energy

Abstract:In this study, we investigated the critical factor for promoting visible light photocatalytic hydrogen evolution using a TiO2 photocatalyst, which limits the amount of Ti3+ coexisting with the catalyst. Our goal was to establish a simple and cost effective oxidation and anti-oxidation competitive strategy to synthesize a TiO2-x, photocatalyst containing Ti-0, Ti2+, Ti3+, and Ti4+ and an appropriate concentration of Ti3+ from the oxidation of titanium metal. Finally, the band gap and charge recombination of the final products were successfully optimized by the cooperation of all of the components to achieve efficient visible light photocatalytic hydrogen evolution without the addition of any exogenous dopants, and an ideal quantum yield of approximately 4.28% was achieved at a wavelength of 480 am. Although various methods have been attempted to preserve Ti3+, our strategy for preserving Ti3+ from the initial preparation to the final products represents a new approach to alter the activity of TiO2. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Self-doped Ti3+-enhanced TiO2 Nanoparticles with a High-Performance Photocatalysis

Mingyang Xing,Wenzhang Fang,Muhammad Nasir,Yunfei Ma,Jinlong Zhang,Masakazu Anpo

DOI: https://doi.org/10.1016/j.jcat.2012.10.014

IF: 7.3

2013-01-01

Journal of Catalysis

Abstract:A series of TiO2 catalysts self-doped with Ti3+ were successfully synthesized by a simple one-step solvothermal method with low-cost NaBH4 added as a reductant. During NaBH4 reduction, large amounts of NaBO2 and carbonaceous impurities covered the surface of the TiO2 self-doped with Ti3+, resulting in an inhibition of visible-light absorption and photocatalytic activity. In the preparation, HCl solution was used to wash off the by-product NaBO2 and carbonaceous impurities coated on the surface of the catalysts. The samples were characterized by XRD, UV-DRS, ESR, XPS, and FT-IR analyses. After HCl washing, the photocatalytic activity of the Ti3+-doped TiO2 increased markedly, while the Ti3+ content remained the same. Furthermore, it was found that the visible-light photocatalytic activity of Ti3+-doped TiO2 depended on the amount of Ti3+ added, while there was no significant impact of Ti3+ doping on its UV-light photocatalytic activity.
Efficient Photocatalytic Hydrogen Evolution under Visible Light over A Mesoporous Titania Crystallized by Thermal Treatment in Hydrogen

Dengwei Jing,Jinwen Shi,Shaohua Shen,Liejin Guo

DOI: https://doi.org/10.1166/sam.2013.1546

2013-01-01

Science of Advanced Materials

Abstract:TiO2 was prepared by a sot gel method with TiCl4 as precursor and calcined under N-2, Ar, air, and H-2, respectively. The samples are subjected to various physiochemical characterizations. Our results showed that the reducing hydrogen gas atmosphere significantly affected the growth of TiO2 crystallite, leading to formation of mesoporous TiO2 with crystalline framework and high surface area. It also shows high photocatalytic activity for hydrogen production under visible light. Our report shows that the mesoporous TiO2 exhibiting high photocatalytic activity under visible light can be obtained by thermal treatment in certain atmosphere, needless of additional ionic doping which is often employed in traditional strategies. Our finding is believed to be useful for the batch production of TiO2 with high activity and especially with visible light response for the utilization of Solar hydrogen fuel production.
Photoeletrochemical generation of hydrogen over carbon-doped TiO2 photoanode

Bin Zhou,Meghan Schulz,H.Y. Lin,S. Ismat Shah,Jiuhui Qu,C.P. Huang

DOI: https://doi.org/10.1016/j.apcatb.2009.07.026

2009-01-01

Abstract:Nanostructured carbon-doped TiO2 (C-TiO2) thin film was prepared by pulsed laser deposition (PLD) on ITO substrate. Results of X-ray diffraction (XRD) analysis of the thin film showed that the crystal structure of the C-TiO2 was a hybrid of rutile and anatase. Data of X-ray photoelectron spectroscopic (XPS) analysis confirmed the successful incorporation of carbon into TiO2 molecules, which formed defects. These defects narrowed the band gap of the C-TiO2 from 3.25eV of pure TiO2 to 3.15eV. The photoelectrochemical property of the C-TiO2 film was examined by evaluating the efficiency of hydrogen generation by water splitting in a two-compartment electrochemical system. The fastest rate of gas production was obtained when the thin film was irradiated by light at a wavelength of 325nm; the photoresponse under visible radiation was limited, however. Applying a bias potential across the photoanode and its counter electrode can increase hydrogen generation effectively. Organic substance added to the photoanodic chamber was photocatalytically degraded which increased the photocurrent and subsequently enhanced hydrogen generation.
Photocatalytic H 2 evolution under visible-light irradiation on modified TiO 2 catalysts

Huirong Liang,Liejin GUO

DOI: https://doi.org/10.4028/www.scientific.net/AMR.512-515.1426

2012-01-01

Abstract:This TiO2 catalyst is modified by two means of doping and dye-sensitization to decompose the water into hydrogen under visible light irradiation in this paper. By exploring the mechanisms of the modification with two ways, it is found that the modification can make TiO2 semiconductor with only UV photocatalytic activity become a catalyst with the visible-light activity. The experiments demonstrate that quantum efficiency and energy conversion efficiency of the doped catalyst is respectively 1.5% and 0.5%, and that of the sensitized catalyst is respectively 2.13% and 0.89%. By comparison the doped TiO2 catalysts have better prospect in the application because of the instability of the sensitized catalyst.
Photocatalytic H2 Evolution under Visible-Light Irradiation on Modified TiO2 Catalysts

Hui Rong Liang,Lie Jin Guo

DOI: https://doi.org/10.4028/www.scientific.net/amr.512-515.1426

2012-01-01

Advanced Materials Research

Abstract:This TiO2 catalyst is modified by two means of doping and dye-sensitization to decompose the water into hydrogen under visible light irradiation in this paper. By exploring the mechanisms of the modification with two ways, it is found that the modification can make TiO2 semiconductor with only UV photocatalytic activity become a catalyst with the visible-light activity. The experiments demonstrate that quantum efficiency and energy conversion efficiency of the doped catalyst is respectively 1.5% and 0.5%, and that of the sensitized catalyst is respectively 2.13% and 0.89%. By comparison the doped TiO2 catalysts have better prospect in the application because of the instability of the sensitized catalyst.
H-doped TiO2-x Prepared with MgH2 for Highly Efficient Solar-Driven Hydrogen Production

Apurba Sinhamahapatra,Ha-Young Lee,Shaohua Shen,Samuel S. Mao,Jong-Sung Yu

DOI: https://doi.org/10.1016/j.apcatb.2018.06.030

2018-01-01

Abstract:Efficient utilization of visible light with high stability remains a critical challenge for solar-driven photochemical generation of hydrogen (H-2) using particulate photocatalysts. Black TiO2 was introduced with remarkable enhancement of visible light absorption, but its efficiency in the visible light has not reached the desired level for real-world applications. Here we report a gold-colored H-doped TiO2-x (H:TiO2-x) nanoparticles prepared by controlled reduction via simultaneous presence of [Mg] and [H], which are obtained from the decomposition of MgH2. The H-doped TiO2-x, exhibits a significant activity (16.1 mmolg(-1)h(-1)) and remarkable stability after Pt deposition for solar-driven H-2 generation from methanol-water. The excellent photoactivity of H-doped TiO2 can be attributed to oxygen vacancies and H doping at the reduced TiO2-x, surface generated by [Mg] and [H]. The H-doped TiO2 is also producing H-2 from methanol-seawater with a rate of 6.1 mmolg(-1)h(-1) under simulated sunlight.
Ti3+ and Carbon Co-Doped TiO2 with Improved Visible Light Photocatalytic Activity

Yunchang Liu,Mingyang Xing,Jinlong Zhang

DOI: https://doi.org/10.1016/s1872-2067(14)60093-0

2014-01-01

Abstract:Using ethanol as the carbon source, a series of Ti3+ and carbon co-doped TiO2 samples were successfully synthesized by an innovative and simple vacuum activation method in a one-step process. The Ti3+ self-doped TiO2 featured a high visible light photocatalytic activity that improved considerably following subsequent carbon doping modification of the catalyst surface. The samples were characterized by X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, electron spin resonance, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The Ti3+ and C co-doped TiO2 catalyst showed a high methyl orange photo-degradation efficiency under visible light irradiation. The doping levels induced by Ti3+ and oxygen vacancies were responsible for the improved visible light response of TiO2. Simultaneously, the surface coverage of graphite on the catalyst could improve the absorption of visible light and migration efficiency of photo-induced electrons. The synergistic effects of Ti3+ self-doping and graphite coverage led to the improved visible light photocatalytic activity of Ti3+ and C co-doped TiO2.
A composite visible-light photocatalyst for hydrogen production

Yiliang Liu,Liejin Guo,Wei Yan,Hongtan Liu

DOI: https://doi.org/10.1016/j.jpowsour.2005.11.105

IF: 9.2

2006-01-01

Journal of Power Sources

Abstract:A composite photocatalyst, Pd–TiO2−xNx–WO3, was synthesized by the template method and characterized by energy dispersive X-ray microanalysis (EDX), X-ray diffraction (XRD), UV–vis spectrometer, and scanning electron microscope (SEM). The results of EDX analysis reveals that the molecular formula of the composite photocatalyst can be expressed as Pd–TiO1.72N0.28–WO3. The UV–vis absorption spectrum indicates that the absorption edge of the catalyst red-shifts to around 600nm. Under the irradiation with ultraviolet and visible light, the catalyst showed good performance for photocatalytic hydrogen production with a Na2S/Na2SO3 system as the sacrificial agent.
The enhanced photocatalytic activity of Zn 2+ doped TiO 2 for hydrogen generation under artificial sunlight irradiation prepared by sol–gel method

Qizhao Wang,Guoxia Yun,Ning An,Yanbiao Shi,Jiafeng Fan,Haohao Huang,Bitao Su

DOI: https://doi.org/10.1007/s10971-014-3538-7

2014-01-01

Journal of Sol-Gel Science and Technology

Abstract:Novel Zn 2+ doped TiO 2 photocatalysts were synthesized by a simple sol–gel method. X-ray diffraction, UV–Vis diffuse reflectance spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma optical emission spectrometry, Brunauer–Emmett–Teller method and Photoluminescence spectra were employed to examine the phase structure, morphology and optical properties of the synthesized samples. Their photocatalytic activities were evaluated by spitting water under artificial sunlight irradiation. In contrast with pure TiO 2 , the Zn 2+ –TiO 2 samples showed enhanced photocatalytic properties. When TiO 2 was doped with 1 wt% Zn 2+ , it showed the optimal photocatalytic activity with the amount of hydrogen evolution of 180 μmol h −1 , which was as about seven times as that for pure TiO 2 . For the Zn 2+ –TiO 2 , Zn 2+ can improve the separation ratio of photoexcited electrons–holes and leads to the high photocatalytic activity of TiO 2 .
Sol-Gel Hydrothermal Synthesis Of Visible-Light-Driven Cr-Doped Srtio3 For Efficient Hydrogen Production

He Yu,Shuxin Ouyang,Shicheng Yan,Zhaosheng Li,Tao Yu,Zhigang Zou

DOI: https://doi.org/10.1039/c1jm11385b

2011-01-01

Journal of Materials Chemistry

Abstract:Using a sol-gel hydrothermal method, we have synthesized Cr-doped SrTiO3 with a high specific surface area (19.3-65.4 m(2) g(-1), depending on the hydrothermal temperature). X-ray diffraction (XRD), UV-Vis diffuse reflectance spectra, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the Cr-doped SrTiO3. XRD analysis showed that Cr-doped SrTiO3 exhibited good crystallinity and the crystalline size calculated using Scherrer equation is about 20-30 nm. UV-Vis diffuse reflectance spectra showed that Cr doping can extend the absorption edge of SrTiO3 into visible region (540 nm). TEM images of Cr-doped SrTiO3 showed that the high temperature during the hydrothermal reaction will prompt the aggregation of primary particles into porous spheres. The porous structure was further certified by nitrogen physisorption results. By loading Pt (0.6 wt.%) nanoparticles as a cocatalyst, the as-prepared Cr-doped SrTiO3 photocatalyst exhibited high H-2 evolution rate (82.6 mu mol h(-1)) from 20% methanol solution under visible light irradiation, which is 3 times higher than that of the sample synthesized by solid state reaction. The high activity of the as-prepared Cr-doped SrTiO3 can be attributed to the high specific surface area and good crystallinity.
Self-doped SrTiO3−δ photocatalyst with enhanced activity for artificial photosynthesis under visible light

Kui Xie,Naoto Umezawa,Ning Zhang,Pakpoom Reunchan,Yuanjian Zhang,Jinhua Ye

DOI: https://doi.org/10.1039/c1ee01594j

2011-01-01

Abstract:Self-doped SrTiO3−δ was prepared through a carbon-free one-step combustion method followed by a series of heat treatments in Ar at temperatures ranging from 1200 to 1400 °C. X-Ray Photoelectron Spectroscopy (XPS), Electron Paramagnetic Resonance (EPR) and High-Resolution TEM confirm the presence of Ti3+ in samples with oxygen vacancy accommodated in perovskite by forming Ruddlesden–Popper crystallographic shears. The UV-vis spectra and electronic structure calculations show that the oxygen vacancy and Ti3+ together induce an in-gap band to enhance the visible light absorption. Pulsed Adsorption of CO2 and Temperature Programmed Desorption (TPD) experiments show that the higher oxygen deficiency tends to improve the chemical adsorption of CO2 on the surface as well as in the bulk of SrTiO3−δ, especially the accommodation of CO2 molecule in the oxygen vacancy. It is the synergetic effect of visible light absorption and chemical adsorption of CO2 that improves the artificial photosynthesis to generate hydrocarbon fuels from CO2/H2O under visible light irradiation. We also demonstrated that the incorporation of oxygen from CO2/H2O into the oxygen vacancy of SrTiO3−δ leads to the absence of oxygen evolution which therefore results in the oxidation of SrTiO3−δ (Ti3+ → Ti4+).

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences

Self-Doped Ti3+ Enhanced Photocatalyst for Hydrogen Production under Visible Light.

Self-Doped Ti3+ Enhanced Photocatalyst for Hydrogen Production under Visible Light

Carbon Coating Stabilized Ti3+-doped TiO2 for Photocatalytic Hydrogen Generation under Visible Light Irradiation

Enhanced UV Photoactivity of Ti3+ Self-Doped Anatase TiO2 Single Crystals Hydrothermally Synthesized Using Ti-H2O2-HF Reactants

Octahedral Shaped PbTiO 3 -TiO 2 Nanocomposites for High-Efficiency Photocatalytic Hydrogen Production.

In situ surface hydrogenation synthesis of Ti3+ self-doped TiO2 with enhanced visible light photoactivity.

Massive Ti3+ Self-Doped by the Injected Electrons from External Pt and the Efficient Photocatalytic Hydrogen Production under Visible-Light

Engineering a Self-Grown TiO2 /Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

Development of copper-doped TiO2 photocatalyst for hydrogen production under visible light

Competition Between Oxidation and Anti-Oxidation to Guarantee Visible Light Activity for a TiO2–x Photocatalyst from the Dissolution of Ti0

Self-doped Ti3+-enhanced TiO2 Nanoparticles with a High-Performance Photocatalysis

Efficient Photocatalytic Hydrogen Evolution under Visible Light over A Mesoporous Titania Crystallized by Thermal Treatment in Hydrogen

Photoeletrochemical generation of hydrogen over carbon-doped TiO2 photoanode

Photocatalytic H 2 evolution under visible-light irradiation on modified TiO 2 catalysts

Photocatalytic H2 Evolution under Visible-Light Irradiation on Modified TiO2 Catalysts

H-doped TiO2-x Prepared with MgH2 for Highly Efficient Solar-Driven Hydrogen Production

Ti3+ and Carbon Co-Doped TiO2 with Improved Visible Light Photocatalytic Activity

A composite visible-light photocatalyst for hydrogen production

The enhanced photocatalytic activity of Zn 2+ doped TiO 2 for hydrogen generation under artificial sunlight irradiation prepared by sol–gel method

Sol-Gel Hydrothermal Synthesis Of Visible-Light-Driven Cr-Doped Srtio3 For Efficient Hydrogen Production

Self-doped SrTiO3−δ photocatalyst with enhanced activity for artificial photosynthesis under visible light