A High Sensitive Magnetic Field Sensor Based on Photonic Crystal Fiber Modal Interferometer

Ying Li,Guofeng Yan,Sailing He

DOI: https://doi.org/10.1364/apos.2016.th4a.48

2016-01-01

Abstract:A high sensitive magnetic field sensor is newly designed and analyzed, which is consisted of two segments of thin core fiber and a sandwiched photonic crystal fiber. The average sensitivity we obtained is 481 pm/Oe.

What problem does this paper attempt to address?

Magnetic-Ionic-Liquid-Functionalized Photonic Crystal Fiber for Magnetic Field Detection

Hu Liang,Yange Liu,Hongye Li,Simeng Han,Hongwei Zhang,Yonghua Wu,Zhi Wang

DOI: https://doi.org/10.1109/lpt.2018.2790913

IF: 2.6

2018-01-01

IEEE Photonics Technology Letters

Abstract:A compact optical fiber magnetic field sensor based on a magnetic-ionic-liquid-functionalized photonic crystal fiber (PCF) has been proposed and experimentally demonstrated. The magnetic field sensor was fabricated by splicing an index-guiding PCF having one magnetic-ionic-liquid-infiltrated (MIL-infiltrated) air hole in the innermost layer infiltrated with conventional single-mode fibers. The transmission spectral magnetic response of the proposed sensor have been measured and theoretically analyzed. Owing to the effective interaction between the MIL and transmission light as well as the controllable attenuation property of MIL, the magnetic field sensitivity reaches up to -0.01991 dB/Oe for a relatively linear magnetic intensity range of 0 to 440 Oe.
A Highly Magnetic Field Sensitive Photonic Crystal Fiber Based on Surface Plasmon Resonance

Huimin Huang,Zhenrong Zhang,Yang Yu,Lingjun Zhou,Yuyu Tao,Guofeng Li,Junbo Yang

DOI: https://doi.org/10.3390/s20185193

IF: 3.9

2020-09-11

Sensors

Abstract:A novel magnetic field sensor comprising a photonic crystal fiber (PCF) is designed and investigated based on surface plasmon resonance (SPR). We use finite element analysis in order to analyze the sensing characteristics of the magnetic field sensor. The simulation results show that the sensor is very sensitive to the change of refractive index and has good linearity in the refractive index range from 1.43–1.45. The thickness of the metal film and the metal material has great influence on the resonance wavelength and the peak of the loss spectrum, the diameter of the central air hole will affect SPP excitation. When the thickness of gold layer is 50 nm, the refractive index sensitivity is 4125 nm/RIU in the refractive index range from 1.43–1.45. Using the designed sensor for magnetic field sensing, the loss spectrum is red-shifted with the increase of the magnetic field, the highest magnetic field sensitivity can reach 61.25 pm/Oe in the range from 50 Oe to 130 Oe. The sensor not only has high sensitivity of refractive index, but it can also realize accurate measurement of magnetic field. It has huge application potential in complex environment, remote sensing, real-time monitoring, and other fields.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
High-Sensitivity MF Filled Photonic Crystal Fiber Magnetic Field Sensor Based on Sagnac Interferometer

Zhenkai Fan,Haishan Liu,Hailiang Chen,Shichao Chu,Shuguang Li,Yinping Zhang

DOI: https://doi.org/10.1007/s10948-024-06761-2

2024-06-23

Journal of Superconductivity and Novel Magnetism

Abstract:A high sensitivity photonic crystal fiber (PCF) magnetic field sensor based on Sagnac interferometer is proposed. All the air holes of the PCF are completely filled with the magnetic fluid (MF), which is a magnetic liquid material. The sensing performance of PCF is simulated and analyzed by using finite element method (FEM). It is found that the effects of wavelength λ , phase birefringence B ( λ , H ), and group birefringence B g ( λ , H ) on the sensitivity are very significant. The two dip points in this spectrum show a red shift and a blue shift as the refractive index of the magnetic fluid increases, respectively. This magnetic field sensor obtains the average sensitivity of 889.5 pm/Oe (111,684.9 nm/RIU) and −994.3 pm/Oe (−124,839.5 nm/RIU) in the range from 90 to 240 Oe.

physics, condensed matter, applied
Magnetic Field Sensor Based on Photonic Crystal Fiber Taper Coated with Ferrofluid

Yong Zhao,Di Wu,Ri-Qing Lv

DOI: https://doi.org/10.1109/lpt.2014.2360531

IF: 2.6

2015-01-01

IEEE Photonics Technology Letters

Abstract:A novel and compact magnetic field sensor based on a tapered photonic crystal fiber (PCF) coated with ferrofluid is proposed. It consists of a section of tapered PCF, which is spliced between two single-mode fibers with a waist diameter of 24 mu m. The ferrofluid is filled in the capillary to coat the PCF taper. Experimentally, the refractive index (RI) of the ferrofluid increased under increasing magnetic field intensity (H) with a sensitivity of 4 x 10(-5) RIU/Gs and the RI sensitivity in the evanescent field is 401 nm/RIU. Therefore, the interference spectrum is shifted as the change of H ranged from 100 to 600 Gs with a sensitivity of 16.04 pm/Gs and resolution of 0.62 Gs. The proposed magnetic field sensor is attractive due to its compact size, low cost, and immunity to electromagnetic interference beyond what conventional magnetic field sensors can offer.
A Magnetic Field Sensor Based on Directional Coupling in a Magnetic Fluid-Filled Photonic Crystal Fiber

Yingchao Liu,Lijun Zhang,Shuang Ren,Hailiang Chen

DOI: https://doi.org/10.3390/ma16175805

IF: 3.4

2023-08-25

Materials

Abstract:In this paper, a dual-core photonic crystal fiber (DC-PCF) sensitivity sensor filled with magnetic liquid is introduced and investigated with the finite element method (FEM). To regulate the energy coupling involving the two cores, the magnetic fluid is filled into the pore between the two cores. To adjust the coupling between the supermodes in the DC-PCF, the refractive index (RI) of the air hole filled magnetic fluid may change due to the external magnetic field. This specifically created a magnetic fluid-filled DC-PCF; the magnetic fluid-filled hole is not used as the core for energy transmission, thus avoiding transmission loss. The dip wavelength and the magnetic field displayed an excellent linear connection between 80 and 260 Oe, depending on the numerical data. The detection sensitivity of the magnetic field reached 515.75 pm/Oe at a short fiber length of 482 μm. The designed magnetic fluid-filled DC-PCF has high sensitivity and small volume and has great application prospects in magnetic field detection in the medical and industrial fields.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Magnetic fluid infiltrated dual core photonic crystal fiber based highly sensitive magnetic field sensor

Moutusi De,Vinod Kumar Singh

DOI: https://doi.org/10.1016/j.optlastec.2018.03.022

2018-10-01

Abstract:A very high sensitive magnetic field sensor based on a square lattice dual core photonic crystal fiber (DCPCF) is proposed in this article. The fiber contains two big magnetic fluid (Fe3O4) infiltrated holes around the central region and they are forming two separate waveguide with mode coupling. Mode coupling between these two cores is theoretically studied under influence of different magnetic field strength as well as with changing structural parameters. In the further stage a simple magnetic field sensing system is proposed and its sensing performance is investigated considering manufacturing variation possibilities. Numerical simulation result shows that highest sensitivity of 799.07 pm/Oe can be achieved with probe size of fraction of centimetre. This sensing probe can be used in manufacturing high sensitive portable devices including health monitoring instruments.

optics,physics, applied
Magnetic Field Sensing Based on Whispering Gallery Mode with Nanostructured Magnetic Fluid-Infiltrated Photonic Crystal Fiber

Chencheng Zhang,Shengli Pu,Zijian Hao,Boyu Wang,Min Yuan,Yuxiu Zhang

DOI: https://doi.org/10.3390/nano12050862

IF: 5.3

2022-03-03

Nanomaterials

Abstract:A kind of novel and compact magnetic field sensor has been proposed and investigated experimentally. The proposed sensor consists of a tapered single mode fiber coupled with a nanostructured magnetic fluid-infiltrated photonic crystal fiber, which is easy to be fabricated. The response of magnetic fluid to magnetic field is used to measure the intensity of magnetic field via whispering gallery mode. The magnetic field-dependent shift in resonance wavelength is observed. The maximum magnetic field intensity sensitivity is 53 pm/mT. The sensor sensitivity is inversely proportional to the thickness of the photonic crystal fiber cladding.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
An ultra-sensitive photonic crystal fiber magnetic field sensor based on Vernier effect using two parallel Sagnac loops

Mingjian Ma,Yundong Liu,Qiang Chen,Hailiang Chen

DOI: https://doi.org/10.1088/1402-4896/ad511d

2024-05-30

Physica Scripta

Abstract:Magnetic field detection is of significant importance in various fields, including military, industrial, and power transmission systems. In this paper, we propose a novel ultra-sensitive photonic crystal fiber (PCF) magnetic field sensor based on the Vernier effect, employing two parallel Sagnac loops. Since magnetic field detection relies on the magneto-optical effect of magnetic fluids, all air holes in the PCF are assumed to filled with magnetic fluids. By inserting two slightly different lengths of PCFs into two parallel Sagnac loops, the Vernier effect can be excited to improve the sensitivity of magnetic field detection. The sensing characteristics of the PCF magnetic field sensor are theoretically studied using the finite element method (FEM). Moreover, the influences of the wavelength and magnetic field intensity on the sensing performance are also analyzed. The results show that the sensitivity and resolution of the PCF magnetic field sensor can reach 11.9 nm/Oe and 8.4×10-3 Oe, respectively, within the magnetic field intensity range of 80-150 Oe. To our best knowledge, the proposed magnetic field sensor exhibits the highest sensitivity among existing magnetic field sensors based on optical fiber interferometers. The proposed magnetic field sensor possesses ultra-high sensitivity and resolution, which exhibits good application prospects in the field of magnetic field detection.

physics, multidisciplinary
Magnetic Field Measurement Based on the Sagnac Interferometer with a Ferrofluid-Filled High-Birefringence Photonic Crystal Fiber

Yong Zhao,Di Wu,Ri-Qing Lv,Jin Li

DOI: https://doi.org/10.1109/tim.2016.2519767

IF: 5.6

2016-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:A compact optical fiber magnetic field sensor based on the principle of the Sagnac interferometer is proposed. Different from the conventional ones, a ferrofluid-filled high-birefringence photonic crystal fiber (HB-PCF) is inserted into the Sagnac as a magnetic field sensing element. The refractive index of the ferrofluid filled in the cladding air holes of the HB-PCF will change with respect to the applied magnetic field, and subsequently, the birefringence of the HB-PCF will change, which will affect the shifts of the output interference spectrum in Sagnac. Experiments are carried out to verify the simulation model and the results indicate that the interference spectrum exhibits a red shift with the increment in the magnetic field intensity. The sensitivity of the proposed sensor is up to 0.073 nm/mT for a magnetic field intensity ranging from 10 to 40 mT, while the resolution is 0.001 mT. The proposed magnetic field sensor is attractive due to its compact size, low cost, and immunity to electromagnetic interference beyond what conventional magnetic field sensors can offer.
Hollow-core Photonic Crystal Fiber Fabry–Perot Sensor for Magnetic Field Measurement Based on Magnetic Fluid

Yong Zhao,Ri-qing Lv,Yu Ying,Qi Wang

DOI: https://doi.org/10.1016/j.optlastec.2011.11.011

2012-01-01

Abstract:Based on the characteristic of magnetic-controlling refractive index, the magnetic fluid filled in hollow-core photonic crystal fiber (HC-PCF) can be used as the sensitive medium in the cavity of a fiber Fabry–Perot (F–P) magnetic field sensor. The structure and the sensor principle are introduced. The theoretical simulations of the mode distribution of the HC-PCF filled with the magnetic fluid and the sensor output spectra are discussed in detail. The sensor multiplexing capability is indicated as well. Magnetic field measurement sensitivity is about 33pm/Oe based on the proposed sensor.
A high magnetic field sensitivity PCF‐SPR sensor working in the near‐infrared wavelength band

Zhiying Liu,Hao Li

DOI: https://doi.org/10.1002/mop.33820

IF: 1.311

2023-07-13

Microwave and Optical Technology Letters

Abstract:A novel form of photonic crystal fiber (PCF) magnetic field sensor, utilizing surface plasmon resonance, has been developed and investigated. By depositing a layer of gold onto the interior surface of the left‐sided air hole and introducing magnetic fluid into the aperture to detect magnetic field changes, the plasma resonance effect was ingeniously combined with a dual‐core PCF to achieve magnetic field measurement. The displacement of the loss peak in the output spectrum was observed to gain insights into the magnetic field changes. By means of modulations in the thickness of the gold film, and the spacing and size of the air holes, the optimal parameters for the sensor were obtained. The optimized sensor exhibited a maximum magnetic field sensitivity of up to 6.23 nm/Oe, and the magnetic field detection resolution was approximately 10 μT, enabling precise detection of weak magnetic fields. This fiber sensor boasts a simple structure, ease of production, high sensitivity, and robust environmental adaptability, making it an attractive option for implementation.

engineering, electrical & electronic,optics
Octagonal Photonic Crystal Fiber Magnetic Field Sensor Based on Surface Plasmon Resonance Effect

Mingliang Li,Ying Cao,Jianhua Li,Zonglin Li,Ru Zhang,Fanchao Meng

DOI: https://doi.org/10.1007/s11468-024-02619-4

IF: 2.726

2024-11-27

Plasmonics

Abstract:This paper describes an octagonal photonic crystal fiber (OPCF) magnetic field sensor based on the surface plasmon resonance effect. The magnetic fluid is filled into the first layer of air holes of the OPCF, and the Au is coated into the air hole located in the y -direction. The external magnetic field intensity can be determined by observing the change in the confinement loss spectra caused by the effect of the external magnetic field on the refractive index of the magnetic fluid. A finite element method is used to simulate the effects of structural parameters such as air hole diameter, stomatal spacing, and gold coating thickness on the performance of the fiber optic magnetic field sensor. The sensitivity of the proposed optical fiber magnetic field sensor is 757.1 pm/Oe, a FOM value of 2.16 Oe −1 , and an AS value of 1.43 × 10 −3 Oe −1 , and the detection range is 50–200 Oe. The OPCF magnetic field sensor enables the development of lightweight and high-precision electromagnetic detection equipment due to the fact that OPCF magnetic field sensors do not require excessive modification of PCF, have less damage, are simple in structure, and have low production costs. It will improve the efficiency and quality of data collection in electromagnetic geological exploration and accelerate the transformation and upgradation of intelligent and green geological exploration.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Ampere Force Based Photonic Crystal Fiber Magnetic Field Sensor

Sun-jie Qiu,Qi Liu,Fei Xu,Yan-qing Lu

DOI: https://doi.org/10.1016/j.sna.2014.02.018

IF: 4.291

2014-01-01

Sensors and Actuators A Physical

Abstract:We fabricate an Ampere force based photonic crystal fiber (PCF) magnetic field sensor by bonding a PCF in-line modal interferometer (PCFMI) with an aluminum (Al) wire together. This sensor is very compact, cost-effective, temperature insensitive, highly stable over time and easy to be fabricated only including cleaving and splicing processes. An electrical current flowing through the Al wire in a perpendicular magnetic field can generate Ampere force to lead to the curvature of the Al wire and the PCF. As the cladding mode of the PCF with a large mode field diameter is very sensitive to the curvature, the average magnetic field sensing sensitivity can reach 32.4 pm/mT when 100 mA electrical current is applied with excellent repeatability. Higher sensitivity and a minimal detectable magnetic field of less than 0.1 mT can be realized by increasing the applied electrical current. (C) 2014 Elsevier B.V. All rights reserved.
Highly Sensitive Vector Magnetic Field Sensors Based on Fiber Mach–Zehnder Interferometers

Cai Shuhao,Maksim Sergeev,Andrey Petrov,Sergey Varzhel,Chuanxiang Sheng,Li

DOI: https://doi.org/10.1016/j.optcom.2022.128725

IF: 2.4

2022-01-01

Optics Communications

Abstract:A highly sensitive vector magnetic field sensor based on a fiber Mach-Zehnder interferometer (FMZI) is proposed and demonstrated. The FMZI is composed of a micro-cavity that is fabricated in a single-step laser -induced micro-plasma process with a modest-powered nanosecond fiber laser. Combined with a magnetic fluid, the micro-cavity-based FMZI is constructed to a magnetic field sensor for vectorial sensing. The presented magnetic sensor exhibits a maximal strength sensitivity of 64 nm/mT that is the highest among reported vector magnetic field fiber sensors to date, to the best of our knowledge.
Magnetic Field Sensor Based on Asymmetric Optical Fiber Taper and Magnetic Fluid

Ming Deng,Danhui Liu,Decai Li

DOI: https://doi.org/10.1016/j.sna.2014.02.014

2014-01-01

Abstract:We report an optical fiber magnetic field sensor by merging the advantages of magnetic fluid and a core-cladding-mode interferometer which is directly fabricated on a standard single-mode fiber by using an arc fusion splicing machine. The sensing performances of the sensors are controllable by designing the parameters of the asymmetric-tapered structure. Experimental results show that the sensor with axial offset of 168 mu m and taper waist diameter of 45 mu m not only has good optical properties but also a relatively high magnetic-field sensitivity of similar to 162.06 pm/mT ranging from 0 to 21.4 mT. The proposed sensors would find potential applications in weak magnetic sensing fields. (C) 2014 Elsevier B.V. All rights reserved.
All-solid Highly Sensitive Fiber-Tip Magnetic Field Sensor Based on a Fabry-Perot Interferometer with a Breakpoint Structure.

Yingfang Zhang,Xingchao Ma,Ben Xu,Jianqing Li,Huifang Chen,Juan Kang,Chunliu Zhao,Shangzhong Jin

DOI: https://doi.org/10.1364/ol.521138

IF: 3.6

2024-01-01

Optics Letters

Abstract:An all-solid fiber-tip Fabry–Perot interferometer (FPI) coated with a nickel film is proposed and experimentally verified for magnetic field sensing with high sensitivity. It is fabricated by splicing a segment of a thin-wall capillary tube to a standard single-mode fiber (SMF), then inserting a tiny segment of fiber with a smaller diameter into the capillary tube, and creating an ultra-narrow air-gap at the SMF end to form an FPI. When the device is exposed to magnetic field, the capillary tube is strained due to the magnetostrictive effect of the nickel film coated on its outer surface. In addition, owing to the unique breakpoint sensitivity-enhancement structure of the air-gap FPI, the elongation of the capillary tube whose length is over 100 times longer than the air-gap width is entirely transferred to the cavity length change of the FPI, and the sensor is extremely sensitive to the magnetic field as proved by our experiments, achieving a high sensitivity of up to 2.236 nm/mT for a linear magnetic field range from 40 to 60 mT, as well as a low-temperature cross-sensitivity of 56 µT/°C. The all-solid stable structure, compact size (total length of ∼3.0 mm), and reflective working mode with high magnetic field sensitivity indicate that this sensor has good application prospects.
Highly sensitive magnetic field sensors based on Fe2O3 nanorods grown on the surface of a tapered few mode fiber

Li Li,Chao Jiang,Yuanyuan Han,Chuanju Hu,Longfeng Deng,Jiawei Gao,Wenbo Jiang,Fulin Chen,Haidong Tan,Jian Wen,Hong Li

DOI: https://doi.org/10.1364/OL.506207

2023-12-01

Abstract:A magnetic field (MF) sensor with a stable structure and high sensitivity has been proposed and experimentally verified. We used the water bath method to produce a layer of Fe2O3 nanorods on a tapered few mode fiber (FMF) surface to form a Mach-Zehnder interferometer (MZI). The experiment found that the nanostructure produced on the surface of FMF were particularly stable and firm. Under the action of an external MF, the magnetic permeability of a Fe2O3 nanorod will change, leading to a change in its refractive index, resulting in a linear shift in the resonance wavelength of MZI. The experimental results showed that the MF sensitivity of MZI reached -0.5348 nm/mT in 10 mT∼80 mT. In addition, MZI has a certain sensitivity to environmental humidity and temperature. A long-period fiber grating and a fiber Bragg grating are cascaded with MZI to achieve a simultaneous measurement of three quantities and eliminate their cross-sensitivity.
A new one-dimensional photonic crystal magnetic sensor based on magnetic fluid film with excellent sensing ability and figure of merit

Daohan Ge,Hui Chen,Zhou Hu,Jiakang Shi,Liqiang Zhang

DOI: https://doi.org/10.1016/j.jmmm.2021.168753

IF: 3.097

2022-03-01

Journal of Magnetism and Magnetic Materials

Abstract:A magnetic sensor based on a one-dimensional (1D) photonic crystal was proposed. The transmission characteristics of the 1D photonic crystal magnetic sensor were analyzed using the theory of rigorous coupled wave analysis (RCWA). The variation pattern of magnetic fluid films refractive index with magnetic field and the effect of structural parameters on sensitivity and figure of merit (FOM) were investigated. Based on the wavelength interrogation method, the resonance wavelength is red-shifted with the change of the magnetic field for certain structural parameters. The results show that the structure has a highly linear response within the external magnetic field variation range from 30 Oe to 90 Oe, and its sensitivity and FOM can reach 0.817 nm/Oe and 17.439 Oe−1. Due to the advantages of 1D photonic crystal structure has harp peak, highly linear response, and low transmission loss. The structure has a large potential for applications in complex environments and real-time monitoring.

materials science, multidisciplinary,physics, condensed matter
Magnetic field sensor based on selectively magnetic fluid infiltrated dual-core photonic crystal fiber

Rahul Kumar Gangwar,Vanita Bhardwaj,Vinod Kumar Singh

DOI: https://doi.org/10.1117/1.oe.55.2.026111

IF: 1.3

2016-02-10

Optical Engineering

Abstract:We reported the modeling result of selectively magnetic fluid infiltrated dual-core photonic crystal fiber based magnetic field sensor. Inside the cross-section of the designed photonic crystal fiber, the two fiber cores filled with magnetic fluid (Fe3O4) form two independent waveguides with mode coupling. The mode coupling under different magnetic field strengths is investigated theoretically. The sensitivity of the sensor as a function of the structural parameters of the photonic crystal fiber is calculated. The result shows that the proposed sensing device with 1 cm photonic crystal fiber length has a large sensitivity of 305.8 pm/Oe.

optics
All-optical vector magnetic field sensor based on a side-polished two-core fiber Michelson interferometer

Ziyang Xiong,Chunying Guan,Zhenyu Duan,Tailei Cheng,Peng Ye,Jing Yang,Jinhui Shi,Jun Yang,Libo Yuan,K T V Grattan

DOI: https://doi.org/10.1364/OE.460692

2022-06-20

Abstract:A magnetic field sensor based on a side-polished two-core fiber (SPTCF)-based Michelson interferometer (MI) has been developed and demonstrated. The magnetic field sensor is composed of a standard single mode fiber (SMF) and a section of tapered TCF. By side-polishing a segment of the TCF, the effective index of the exposed core can be made sensitive to the environmental refractive index (RI). To evaluate its performance, a magnetic fluid is used to cover the polished region with a magnetic field sensitive material, where the sensor then measures the magnetic field intensity by sensing the RI change of the magnetic fluid through the evanescent field in the polished core. The SPTCF MI device developed allows for vector magnetic field sensing because of its asymmetric structure, with its highest directional sensitivity being 55.2 pm/degree. Experimental results obtained show that when the magnetic field is parallel to the side-polished plane, a sensitivity of 1.262 nm/mT can be achieved, operating over the magnetic flux density region of 0-5 mT and over a temperature range of 20∼85 °C, where the device is minimally affected by temperature changes. The sensor is well suited to a variety of potential applications given its low cost, strong anti-interference ability, simple structure and high stability.

A High Sensitive Magnetic Field Sensor Based on Photonic Crystal Fiber Modal Interferometer

Magnetic-Ionic-Liquid-Functionalized Photonic Crystal Fiber for Magnetic Field Detection

A Highly Magnetic Field Sensitive Photonic Crystal Fiber Based on Surface Plasmon Resonance

High-Sensitivity MF Filled Photonic Crystal Fiber Magnetic Field Sensor Based on Sagnac Interferometer

Magnetic Field Sensor Based on Photonic Crystal Fiber Taper Coated with Ferrofluid

A Magnetic Field Sensor Based on Directional Coupling in a Magnetic Fluid-Filled Photonic Crystal Fiber

Magnetic fluid infiltrated dual core photonic crystal fiber based highly sensitive magnetic field sensor

Magnetic Field Sensing Based on Whispering Gallery Mode with Nanostructured Magnetic Fluid-Infiltrated Photonic Crystal Fiber

An ultra-sensitive photonic crystal fiber magnetic field sensor based on Vernier effect using two parallel Sagnac loops

Magnetic Field Measurement Based on the Sagnac Interferometer with a Ferrofluid-Filled High-Birefringence Photonic Crystal Fiber

Hollow-core Photonic Crystal Fiber Fabry–Perot Sensor for Magnetic Field Measurement Based on Magnetic Fluid

A high magnetic field sensitivity PCF‐SPR sensor working in the near‐infrared wavelength band

Octagonal Photonic Crystal Fiber Magnetic Field Sensor Based on Surface Plasmon Resonance Effect

Ampere Force Based Photonic Crystal Fiber Magnetic Field Sensor

Highly Sensitive Vector Magnetic Field Sensors Based on Fiber Mach–Zehnder Interferometers

Magnetic Field Sensor Based on Asymmetric Optical Fiber Taper and Magnetic Fluid

All-solid Highly Sensitive Fiber-Tip Magnetic Field Sensor Based on a Fabry-Perot Interferometer with a Breakpoint Structure.

Highly sensitive magnetic field sensors based on Fe2O3 nanorods grown on the surface of a tapered few mode fiber

A new one-dimensional photonic crystal magnetic sensor based on magnetic fluid film with excellent sensing ability and figure of merit

Magnetic field sensor based on selectively magnetic fluid infiltrated dual-core photonic crystal fiber

All-optical vector magnetic field sensor based on a side-polished two-core fiber Michelson interferometer