Abstract:An "atlas" of the Lunar penetrating radar (LPR) patterns is organized and a comprehensive interpretation of the lunar subsurface layers in the areas of the Chang'E (CE) mission is proposed. There are three layers inferred by the LPR high-frequency profiles of the CE-3 and CE-4. The first two layers (i.e., the fine regolith and the ejecta layer) at CE-3 and CE-4 sites have the same strata type but differ in internal structure and thickness. The third layer at the CE-3 site is inferred as the paleoregolith, while at the CE-4 site, it is inferred as the alternating layer with fine materials, ejecta, and fragments. Due to the limited penetration depth of the CE-5 LPR, the data disclose only the fine regolith, with support from the empirical ejecta distribution model. The thicknesses, physical properties, and equivalent growth rates of lunar regolith at three landing sites are estimated and discussed in detail. The lunar regolith thicknesses inferred by the CE-3 and CE-5 LPR data are both approximately 1.0 m. In contrast, the thickness of the lunar regolith at the CE-4 site is 10.0 m, which is greater than that at the other two landing sites. However, the equivalent growth rate of the regolith at the CE-3 and CE-5 landing sites is four times greater than that at the CE-4 landing site. This illustrates that with the increase in lunar regolith thickness, the influence of small impact gardening events on the lunar regolith reconstruction gradually weakened, and the self-buffering effect avoids the fast growth of lunar regolith.

Lunar Regolith Penetrating Radar on the Lander for Chang'E-5 Mission

The Design of Payload Lunar Regolith Penetrating Radar on Chang'E-5 Lander

Performance verification of Lunar Regolith Penetrating Array Radar of Chang’E-5 mission

The Imaging Method and Verification Experiment of Chang'E-5 Lunar Regolith Penetrating Array Radar.

Lunar Penetrating Radar Onboard the Chang'E-3 Mission

Data Processing and Some Results of Chang'E-5 LRPR Ground Verification

Revealing regolith substructure by Chang’E-5 LRPR with optimized cable delay calibration method

Hyperfine Structure of Regolith Unveiled by Chang'E-5 Lunar Regolith Penetrating Radar.

In-Situ Radar Observation of Shallow Lunar Regolith at the Chang'E-5 Landing Site: Research Progress and Perspectives

Hyperfine Structure of Regolith Unveiled by Chang’E-5 Lunar Regolith Penetrating Radar

Image Reconstruction and Interpretation of Chang' E-5 Lunar Regolith Penetrating Radar Data.

Shallow Regolith Structure and Obstructions Detected by Lunar Regolith Penetrating Radar at Chang'E-5 Drilling Site

Design of an Array Antenna System for Chang'E-5 Lrpr

Pseudo-Spectral Time-Domain Method for Subsurface Imaging with the Lunar Regolith Penetrating Radar

Ultra-Wideband MIMO Array for Penetrating Lunar Regolith Structures on the Chang’e-5 Lander

The Lunar Regolith Structure and Electromagnetic Properties of Chang'E-5 Landing Site

Data Processing and Initial Results of Chang'E-3 Lunar Penetrating Radar

Parameters and Structure of Lunar Regolith in Chang ' E-3 Landing Area from Lunar Penetrating Radar (lpr) Data

Performance evaluation of lunar penetrating radar onboard the rover of CE-3 probe based on results from ground experiments

Lunar Regolith Stratigraphy Analysis Based on the Simulation of Lunar Penetrating Radar Signals

Pattern Analyses of Lunar Penetrating Radar Images at Chang'E‐3, 4, and 5 Landing Sites: A New Insight into the Evolution of Lunar Regolith