Abstract:The application of Pt alloy catalysts for oxygen reduction reactions (ORRs) in proton-exchange membrane fuel cells is severely impeded by base metal leaching, since the produced metal ions can result in the degradation of a Nafion membrane by replacing H+ and inducing a Fenton reaction. Doping Pt with nonmetal elements can significantly mitigate such problems due to the relative harmlessness of the corrosion products of anions. Herein, we developed a phosphorus-doping strategy, which can greatly boost the ORR performance of Pt. Phosphorus was introduced into the near-surface of commercial Pt/C (denoted as PNS-Pt/C) via a surfactant-free method. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray photoelectron spectrum (XPS) tests indicate that the introduction of phosphorus induced distortion of the Pt lattice and the downshift of the d-band center. In situ electrochemical Fourier transform infrared (FTIR) spectroscopy with adsorbed CO as a molecule probe further revealed that the introduction of phosphorus can lower the adsorption ability. The ORR mass activity of PNS-Pt/C is as high as 1.00 mA μgPt–1@0.90 V, which is enhanced by 7 times in comparison with the initial Pt/C catalyst. Meanwhile, the durability is also enhanced. After 10 000 potential cycles, PNS-Pt/C only lost 14% of the ORR mass activity, while Pt/C lost 51%. More importantly, a H2–air fuel cell with a PNS-Pt/C cathode achieves a power density of 1.06 W cm–2 at a current density of 2.0 A cm–2 with a low Pt loading of 0.15 mg cm–2. The current density at 0.60 V (practical working potential) is 1.54 A cm–2, 2 times higher than that of commercial Pt/C. Density functional theory (DFT) calculations indicate that near-surface phosphorus doping can induce the distortion of the Pt surface, on which some concave Pt sites have optimal binding energy of OH for the ORR. Furthermore, this phosphorus-doping strategy is also valid for a PtNi alloy catalyst to further boost the ORR performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c03137?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c03137</a>.Experimental details; XRD refined results; in situ FTIR spectra; electrochemical tests; CV curves; and tables for performance comparison (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c03137/suppl_file/cs0c03137_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phosphorus-Enhanced Oxygen Reduction Activity and Stability of Commercial Pt/C

Mitigating Phosphate Anion Poisoning of Cathodic Pt/C Catalysts in Phosphoric Acid Fuel Cells

Structurally Disordered Phosphorus-Doped Pt as a Highly Active Electrocatalyst for an Oxygen Reduction Reaction

Phosphorization Treatment Improves the Catalytic Activity and Durability of Platinum Catalysts Toward Oxygen Reduction Reaction

High Activity and Durability of Carbon-Supported Core-Shell PtPx@Pt/C Catalyst for Oxygen Reduction Reaction

High activity and durability of carbon-supported core-shell PtP @Pt/C catalyst for oxygen reduction reaction

Phosphorus-doped Carbon Nanotubes Supported Low Pt Loading Catalyst for the Oxygen Reduction Reaction in Acidic Fuel Cells

Engineering Pt Nanoparticles with Fe and N Codoped Carbon to Boost Oxygen Reduction Catalytic Performance in Acidic Electrolyte

P-Doping Strategy Increasing the Durability of PtCo Nanoparticles for the Oxygen Reduction Reaction

P and O Co‐Doped Pt‐Co Octahedral Nanocrystals As Highly Active and Stable Electrocatalysts for Oxygen Reduction Reaction

Synergy of porous network nanostructuring and nonmetallic phosphorus alloying for efficient oxygen reduction of platinum

Electronic and Potential Synergistic Effects of Surface-Doped P-O Species on Uniform Pd Nanospheres: Breaking the Linear Scaling Relationship Toward Electrochemical Oxygen Reduction

Surface evolution of a Pt–Pd–Au electrocatalyst for stable oxygen reduction

Improving the ORR Performance by Enhancing the Pt Oxidation Resistance

Enhanced O2 Reduction on Atomically Thin Pt-based Nanoshells by Integrating Surface Facet, Interfacial Electronic, and Substrate Stabilization Effects

Synergistic multiple effects by de-alloyed strategy for efficient and durable oxygen reduction

Design and Preparation of Highly Active Pt-Pd/C Catalyst for the Oxygen Reduction Reaction

Synergistic Effect of Electrocatalyst for Enhanced Oxygen Reduction Reaction: Low Pt-Loaded CuPt Alloy Nanoparticles Supported on N-Doped Hierarchical Porous Carbon.

Surface-confined Pt-based Catalysts for Strengthening Oxygen Reduction Performance

Pt skin on Pd-Co-Zn/C ternary nanoparticles with enhanced Pt efficiency toward ORR.

Microbial synthesis of N, P co-doped carbon supported PtCu catalysts for oxygen reduction reaction