Positron Generation Via Ultra-Intense Laser Irradiating a Tapered Hollow Foam-Like Target

Jian-Xun Liu,Yan-yun Ma,Tong-Pu Yu

DOI: https://doi.org/10.1364/isuptw.2018.tuk10

2018-01-01

Abstract:An improved scheme for high-flux, low-divergence and high-energy positrons generation is proposed. With a thick extra layer in the front and a large opening radius hollow cone, positron generation is enhanced, and the beam collimation and energy are well kept.

What problem does this paper attempt to address?

High-Flux Low-Divergence Positron Beam Generation from Ultra-Intense Laser Irradiated A Tapered Hollow Target

Jian-Xun Liu,Yan-Yun Ma,Jun Zhao,Tong-Pu Yu,Xiao-Hu Yang,Long-Fei Gan,Guo-Bo Zhang,Jian-Feng Yan,Hong-Bin Zhuo,Jin-Jin Liu,Yuan Zhao,Shigeo Kawata

DOI: https://doi.org/10.1063/1.4932997

IF: 2.2

2015-01-01

Physics of Plasmas

Abstract:By using two-dimensional particle-in-cell simulations, we demonstrate high-flux dense positrons generation by irradiating an ultra-intense laser pulse onto a tapered hollow target. By using a laser with an intensity of 4 × 1023 W/cm2, it is shown that the Breit-Wheeler process dominates the positron production during the laser-target interaction and a positron beam with a total number >1015 is obtained, which is increased by five orders of magnitude than in the previous work at the same laser intensity. Due to the focusing effect of the transverse electric fields formed in the hollow cone wall, the divergence angle of the positron beam effectively decreases to ∼15° with an effective temperature of ∼674 MeV. When the laser intensity is doubled, both the positron flux (>1016) and temperature (963 MeV) increase, while the divergence angle gets smaller (∼13°). The obtained high-flux low-divergence positron beam may have diverse applications in science, medicine, and engineering.
Simulation Study of Positron Beam Generation Via Irradiating an Ultra-Intense Laser on a Hollow Target

Jian Xun Liu,Yan Yun Ma,Jun Zhao,Tong Pu Yu,Xiao Hu Yang,Wei Quan Wang,Jing Jiang

DOI: https://doi.org/10.4028/www.scientific.net/ddf.373.53

2017-01-01

Abstract:By simulation with the relativistic PIC code EPOCH, it is found that a hollow target ismore beneficial than a plane one for the collimation and compression of the positrons. Irradiating anultra-intense laser (4×1023 W/cm2) on a hollow target, 8.74×1015 positrons are generated. Due tothe focusing effect of the transverse electric field formed in the hollow wall, the divergence angle isaround 21° , while the maximum density of the beam is 4.77×1021 cm-3. When the laser intensity is doubled, both the yield (5.31 ×1016) and the maximum density (1.57 ×1022 cm-3) are greatly increased while the beam divergence gets even smaller (15.7 °).
High-quality GeV Proton Beam Generation from Multiple-Laser Interaction with Double-Layer Target

Obaydur Rahman,Zheng-Mao Sheng

DOI: https://doi.org/10.1063/5.0039457

IF: 2.2

2021-01-01

Physics of Plasmas

Abstract:A scheme for significantly enhancing the beam quality of laser-driven proton acceleration is proposed and investigated with particle-in-cell simulation: two linearly polarized Gaussian laser pulses obliquely irradiate a double-layer target that acquires a periodic surface structure that reduces the reflection, improves the focusing, and enhances the energy coupling of the third, or main, laser pulse that follows. The oblique pulses also provide some initial kinetic energy to the initially static target electrons and thus protons, which is very crucial for efficient acceleration. As a result, a proton beam of 1.15 GeV peak energy, very low energy spread ∼4%, and small divergence angle ∼5° can be obtained with laser intensities of 1021 W cm−2, which is significantly lower than that of the other recently proposed schemes.
Enhanced positron acceleration driven by femto-second laser pulses irradiating structured targets

Sachin Chintalwad,Santhosh Krishnamurthy,Shreyan Ghosh,Christopher P Ridgers,Bhuvanesh Ramakrishna

DOI: https://doi.org/10.1088/1361-6455/ad31b1

2024-03-10

Journal of Physics B Atomic Molecular and Optical Physics

Abstract:We have proposed a compact scheme for generating high-density and high-energy positrons by irradiating different shaped targets with an ultra-intense laser pulse, using 2-D particle-in-cell simulations and numerical analysis. Our simulations show that the Breit-Wheeler process dominates positron production during laser-target interaction when a laser with an intensity of 4 × 10^23 W cm −2 is used. We obtain a positron beam with an energy of 2.5 GeV and a total number exceeding 10^9 ,which is an improvement by two orders of magnitude compared to previous work with the same laser intensity. By using different shaped targets, we are able to generate a high-energy positron beam with low divergence. The yield of positron pairs depends on both the target and the laser parameters, and we have investigated how the shape of the target can enhance pair production and reduce divergence. Both of our analytical and simulation results demonstrate that this high-flux and low-divergence positron beam has direct applications in the field of medical and astro-physics that can be explored in the upcoming high intensity laser facilities .

optics,physics, atomic, molecular & chemical
High-Energy Monoenergetic Protons from Multistaged Acceleration of Thin Double-Layer Target by Circularly Polarized Laser

Z. M. Zhang,X. T. He,Z. M. Sheng,M. Y. Yu

DOI: https://doi.org/10.1063/1.3556124

IF: 2.2

2011-01-01

Physics of Plasmas

Abstract:Multistaged acceleration of solid-density thin foils by ultraintense circularly polarized laser pulse is investigated. A stable radiation pressure acceleration (RPA) stage is first established. Higher dimensional effects such as transverse instabilities and enhanced electron heating then gradually make the initially opaque foil transparent to the laser light. Accordingly, the dominant acceleration mechanism changes smoothly from RPA to target normal sheath acceleration (TNSA). The transition can therefore enhance the maximum energy of the accelerated ions but broaden their energy spectrum. For a double-layer target, however, the light ions (protons) in the backlayer can be efficiently accelerated in the RPA and TNSA regimes nearly monoenergetically. Two-dimensional particle-in-cell simulations show that with this scheme a circularly polarized laser pulse of peak intensity 3.9 x 1022 W/cm(2) can produce a collimated proton bunch that persists for many Rayleigh lengths and its peak energy can reach 4.2 GeV with FWHM of 200 MeV. (C) 2011 American Institute of Physics. [doi:10.1063/1.3556124]
High-flux Positrons Generation Via Two Counter-Propagating Laser Pulses Irradiating Near-Critical-density Plasmas

Jian-xun Liu,Yuan Zhao,Xin-ping Wang,Jian-zhou Quan,Tong-pu Yu,Guo-Bo Zhang,Xiao-hu Yang,Yan-yun Ma,Fu-qiu Shao,Jun Zhao

DOI: https://doi.org/10.1063/1.5043627

IF: 2.2

2018-01-01

Physics of Plasmas

Abstract:A scheme for generating high-flux positrons by two counter-propagating laser pulses colliding in near-critical-density plasmas is proposed, which might be realized with current laser facilities. Positrons of number 2.79 × 105 and with a maximum density of 9.63 × 1024 m−3 can be generated for a laser with an intensity of 1022 W cm−2. This is attributed to the increase in the cross sections for photon radiation and positron generation in the colliding scheme. In order to improve the positron generation, the relevant parameters are discussed in detail. This scheme will facilitate the observation of the Breit-Wheeler positrons in the laboratory.
Tens GeV Positron Generation and Acceleration in a Compact Plasma Channel

Jian-Xun Liu,Tong-Pu Yu,Liang-Qiang Cao,Yuan Zhao,Guo-Bo Zhang,Liang Ma,Shi Qu,Yan-Yun Ma,Fu-Qiu Shao,Jun Zhao

DOI: https://doi.org/10.1088/1361-6587/ab07f3

IF: 2.532

2019-01-01

Plasma Physics and Controlled Fusion

Abstract:We propose a compact scheme for high-density and high-energy positron generation. In the scheme, the generation, compression and acceleration of positrons are encompassed in a plasma channel irradiated by an ultra intense laser. In about 20 mu m, positrons are accelerated with their energy beyond 20 GeV, and are compressed with a maximal density of 4.1n(c). The obtained positron beam with a wave-like density profile is accelerated via the direct laser acceleration.
Positron generation via ultra-intense circularly polarized laser pulses colliding in near-critical-density plasmas with different thickness

Zhi-Kai Lin,Jian-Xun Liu,Ting Gao,Jin-Jian Lv,Cang-Zhen Meng,Hong-Bin Jin,Yuan Zhao,Tong-Pu Yu,Jun Zhao

DOI: https://doi.org/10.1063/5.0104670

IF: 2.2

2022-08-24

Physics of Plasmas

Abstract:The pulses collision scheme has been demonstrated to be an effective way for the Breit–Wheeler positron generation. In this work, positron generation via two circularly polarized laser pulses colliding in near-critical-density plasmas with different thicknesses is further studied. The results show that high flux and high density positrons are generated and collected in 14 μ m thick plasmas as extra backflow electrons contribute to radiation. Though the positron yield in 4 μ m thick plasmas is lower than that in the thick plasmas, partial positrons are accelerated out of the collision region with a small divergence and quasi-monoenergetic energy. It is found that the Lorentz field dominates positron acceleration and collection. This investigation will further facilitate quality positron generation and application.

physics, fluids & plasmas
Positron Generation Via Ultra-Intense Laser Pulses Colliding in a Cylinder Filled with Near-Critical-density Plasmas

Jian-Xun Liu,Yuan Zhao,Tong-Pu Yu,Yan-Yun Ma,Jun Zhao

DOI: https://doi.org/10.1117/12.2520302

2019-01-01

Abstract:A new scheme is proposed in which high-flux and high-density positrons are generated via ultra-intense laser pulses colliding in a cylinder filled with near-critical-density plasmas. Comparing with the only cylinder case and the only gas case, positron generation is enhanced with a higher density. When discussing the influence of plasma density in positron generation, an optimal gas density is found around the near-critical density. The scheme will facilitate the realization of positron generation in labs and further applications of positrons.
High-Yield High-Efficiency Positron Generation in High-Z Metal Targets Irradiated by Laser Produced Electrons from Near-Critical Density Plasmas

Wei Song,Rong-Hao Hu,Yin-Ren Shou,Zheng Gong,Jin-Qing Yu,Chen Lin,Wen-Jun Ma,Yan-Yin Zhao,Hai-Yang Lu,Xue-Qing Yan

DOI: https://doi.org/10.1088/0256-307x/34/8/085201

2017-01-01

Abstract:An improved indirect scheme for laser positron generation is proposed. The positron yields in high-Z metal targets irradiated by laser produced electrons from near-critical density plasmas and underdense plasma are investigated numerically. It is found that the positron yield is mainly affected by the number of electrons of energies up to several hundreds of MeV. Using near-critical density targets for electron acceleration, the number of high energy electrons can be increased dramatically. Through start-to-end simulations, it is shown that up to 6.78 x 10 10 positrons can be generated with state-of-the-art Joule-class femtosecond laser systems.
Enhancement of positron yields using multi-layer targets irradiated by laser-induced energetic electrons

Meng Peng,Yan-Yun Ma,Bo-Yuan Li,Li-Chao Tian,Jing Jiang,Ming Zi,Xiao-Hu Yang

DOI: https://doi.org/10.3389/fphy.2022.1038416

IF: 3.718

2022-12-10

Frontiers in Physics

Abstract:Positrons with high energy and short pulse duration generated by the ultra-short and ultra-intense laser interaction with a two-target system (under-density plasma target and high-Z metal target) have wide applications. In this paper, we proposed an optimal scheme for enhancing positrons with multi-layer high-Z converters. Positrons with larger divergence escape from the target zone, reducing positron annihilation in the target, while secondary particles with smaller divergence react with the subsequent target to produce more positrons. The total positron yield and positron beam divergence increased obviously with the target number when using the thin converter, while the scenario was reversed for the recorded positrons. The total positrons produced by bilayer 5-mm targets and eight-layer 1-mm targets increased by 14% and 62%, respectively, compared to the outgoing positrons produced by an 8-mm monolayer target. Positron yields can be further enhanced by adjusting the thickness of the subsequent target and distance, according to the intensity and angular distribution of positrons emitted from the previous target.

physics, multidisciplinary
High-flux positron generation via the ultra-intense laser irradiating density-modulated plasmas

Jian-Xun Liu,Ting Gao,Xu Wang,Hong-Bin Jin,Wei-Qiang Deng,Tai-Yang Liu,Tong-Pu Yu

DOI: https://doi.org/10.3389/fphy.2022.1052654

IF: 3.718

2023-01-05

Frontiers in Physics

Abstract:To investigate plasma density during the Breit–Wheeler positron generation, a comparative study of four plasma targets is performed via the PIC (particle-in-cell) code EPOCH. When an ultra-intense laser ( 2.8×1023 Wcm−2 ) is incident, more positrons with high energy are generated in the increasing density plasmas. The positron yield is already 1.5×108 with a cutoff energy of 2 GeV at t=37T0 . It is demonstrated that increasing density plasmas will enhance gamma photon radiation and positron generation. In increasing density plasmas, under-dense plasmas favor electron acceleration, and over-dense plasmas will induce laser reflection. Cross sections of the Compton back-scattering and the BW positron generation are both increased via high-energy electrons colliding with the reflected laser. In addition, increasing the laser intensity will directly enhance positron generation. This investigation will further facilitate high-flux positron generation and application.

physics, multidisciplinary
Copious Positron Production by Femto-Second Laser Via Absorption Enhancement in a Microstructured Surface Target

Ye-Chen Wang,Yan Yin,Wei-Quan Wang,De-Bin Zou,Wen-Xuan Miao,Tong-Pu Yu,Fu-Qiu Shao

DOI: https://doi.org/10.1038/s41598-020-61964-6

IF: 4.6

2020-01-01

Scientific Reports

Abstract:Laser-driven positron production is expected to provide a non-radioactive, controllable, radiation tunable positron source in laboratories. We propose a novel approach of positron production by using a femto-second laser irradiating a microstructured surface target combined with a high-Z converter. By numerical simulations, it is shown that both the temperature and the maximum kinetic energy of electrons can be greatly enhanced by using a microstructured surface target instead of a planar target. When these energetic electrons shoot into a high Z converter, copious positrons are produced via Bethe-Heitler mechanism. With a laser (wavelength λ = 1 μm) with duration ~36 fs, intensity ~5.5 × 1020 W/cm2 and energy ~6 Joule, ~109 positrons can be obtained.
Enhanced Electron–positron Pair Production by Ultra Intense Laser Irradiating a Compound Target

Jianxun Liu,Yunlong Ma,Tong-Pu Yu,Zhao Jing,X. H. Yang,Long-Fei Gan,Guo-Bo Zhang,Yuan Zhao,Shijie Zhang,Jin-Jin Liu,H. B. Zhuo,F. Q. Shao,Shigeo Kawata

DOI: https://doi.org/10.1088/0741-3335/58/12/125007

IF: 2.532

2016-01-01

Plasma Physics and Controlled Fusion

Abstract:High-energy-density electron–positron pairs play an increasingly important role in many potential applications. Here, we propose a scheme for enhanced positron production by an ultra intense laser irradiating a gas-Al compound target via the multi-photon Breit–Wheeler (BW) process. The laser pulse first ionizes the gas and interacts with a near-critical-density plasma, forming an electron bubble behind the laser pulse. A great deal of electrons are trapped and accelerated in the bubble, while the laser front hole-bores the Al target and deforms its front surface. A part of the laser wave is thus reflected by the inner curved target surface and collides with the accelerated electron bunch. Finally, a large number of γ photons are emitted in the forward direction via the Compton back-scattering process and the BW process is initiated. Dense electron–positron pairs are produced with a maximum density of m−3. Simulation results show that the positron generation is greatly enhanced in the compound target, where the positron yield is two orders of magnitude greater than that in only the solid slab case. The influences of the laser intensity, gas density and length on the positron beam quality are also discussed, which demonstrates the feasibility of the scheme in practice.
Terahertz-driven Positron Acceleration Assisted by Ultra-Intense Lasers.

J. I. E. Zhao,Qian-ni LI,Yan-ting Hu,H. A. O. Zhang,Y. U. E. Cao,R. O. N. G. Sha,Fu-qiu Shao,Tong-pu Yu

DOI: https://doi.org/10.1364/oe.488505

IF: 3.8

2023-01-01

Optics Express

Abstract:Generation and acceleration of energetic positrons based on laser plasma have attracted intense attention due to their potential applications in medical physics, high energy physics, astrophysics and nuclear physics. However, such compact positron sources face a series of challenges including the beam dispersion, dephasing and unstability. Here, we propose a scheme that couples the all-optical generation of electron-positron pairs and rapid acceleration of copious positrons in the terahertz (THz) field. In the scheme, nanocoulomb-scale electrons are first captured in the wakefield and accelerated to 2.5 GeV. Then these energetic electrons emit strong THz radiation when they go through an aluminum foil. Subsequently, abundant & gamma; photons and positrons are generated during the collision of GeV electron beam and the scattering laser. Due to the strong longitudinal acceleration field and the transvers confining field of the emitted THz wave, the positrons can be efficiently accelerated to 800 MeV, with the peak beam brilliance of 2.26 x 1012 s-1 mm-2 mrad-2 eV-1. This can arouse potential research interests from PW-class laser facilities together with a GeV electron beamline. & COPY; 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Generation of High-Density High-Polarization Positrons via Single-Shot Strong Laser-Foil Interaction

Kun Xue,Ting Sun,Ke-Jia Wei,Zhong-Peng Li,Qian Zhao,Feng Wan,Chong Lv,Yong-Tao Zhao,Zhong-Feng Xu,Jian-Xing Li

DOI: https://doi.org/10.1103/PhysRevLett.131.175101

2023-10-26

Abstract:We put forward a novel method for producing ultrarelativistic high-density high-polarization positrons through a single-shot interaction of a strong laser with a tilted solid foil. In our method, the driving laser ionizes the target, and the emitted electrons are accelerated and subsequently generate abundant $\gamma$ photons via the nonlinear Compton scattering, dominated by the laser. These $\gamma$ photons then generate polarized positrons via the nonlinear Breit-Wheeler process, dominated by a strong self-generated quasi-static magnetic field $\mathbf{B}^{\rm S}$. We find that placing the foil at an appropriate angle can result in a directional orientation of $\mathbf{B}^{\rm S}$, thereby polarizing positrons. Manipulating the laser polarization direction can control the angle between the $\gamma$ photon polarization and $\mathbf{B}^{\rm S}$, significantly enhancing the positron polarization degree. Our spin-resolved quantum electrodynamics particle-in-cell simulations demonstrate that employing a laser with a peak intensity of about $10^{23}$ W/cm$^2$ can obtain dense ($\gtrsim$ 10$^{18}$ cm$^{-3}$) polarized positrons with an average polarization degree of about 70\% and a yield of above 0.1 nC per shot. Moreover, our method is feasible using currently available or upcoming laser facilities and robust with respect to the laser and target parameters. Such high-density high-polarization positrons hold great significance in laboratory astrophysics, high-energy physics and new physics beyond the Standard Model.

Plasma Physics
Positron Generation Via Two Sequent Laser Pulses Irradiating a Solid Aluminum Target

Jian-Xun Liu,Long-Fei Gan,Yan-Yun Ma,Jun Zhao,Xiao-Hu Yang,Tong-Pu Yu,Hong-Bin Zhuo,Fu-Qiu Shao

DOI: https://doi.org/10.1063/1.5000065

IF: 2.2

2017-01-01

Physics of Plasmas

Abstract:A scheme of two sequent laser pulses irradiating a thin solid aluminum target to generate electron-positron pairs via the multi-photon Breit-Wheeler (BW) process is proposed, in order to ease the usual requirement of the laser intensity. 2D and 3D particle-in-cell simulations show that the peak intensity of the laser pulses used in our scheme is only half of that in the case of one laser pulse with a peak intensity of 2 × 1023 W/cm2, but the positron yield is one order higher than that of the latter, which is around 3.7894 × 107 and has a maximal density of 3.134 × 1022 cm−3 when the time interval between the two pulses is set to Δt ≈ 2T0. Therefore, our scheme provides a helpful suggestion for the observation of the BW process in laboratories.
Ultrarelativistic Polarized Positron Jets Via Collision of Electron and Ultraintense Laser Beams

Feng Wan,Rashid Shaisultanov,Yan-Fei Li,Karen Z. Hatsagortsyan,Christoph H. Keitel,Jian-Xing Li

DOI: https://doi.org/10.1016/j.physletb.2019.135120

IF: 4.95

2019-01-01

Physics Letters B

Abstract:Relativistic spin-polarized positron beams are indispensable for future electron-positron colliders to test modern high-energy physics theory with high precision. However, present techniques require very large scale facilities for those experiments. We put forward a novel efficient way for generating ultrarelativistic polarized positron beams employing currently available laser fields. For this purpose the generation of polarized positrons via multiphoton Breit-Wheeler pair production and the associated spin dynamics in single-shot interaction of an ultraintense laser pulse with an ultrarelativistic electron beam is investigated in the quantum radiation-dominated regime. A specifically tailored small ellipticity of the laser field is shown to promote splitting of the polarized particles along the minor axis of laser polarization into two oppositely polarized beams. In spite of radiative de-polarization, a dense positron beam with up to about 90\% polarization can be generated in tens of femtoseconds. The method may eventually usher high-energy physics studies into smaller-scale laser laboratories.
Simulation Study of Indirect Positron Generation by an Ultra-Short Laser

Yonghong Yan,Yuchi Wu,Kegong Dong,Bo Zhang,Zongqing Zhao,Zeen Yao,Yuqiu Gu

DOI: https://doi.org/10.1140/epjd/e2013-40473-x

2014-01-01

The European Physical Journal D

Abstract:Positron generation by an ultra-short ultra-intense laser in an indirect manner has been studied with two-dimensional particle-in-cell (PIC) and Monte Carlo (MC) simulations. In this generation scheme, positrons are produced with energetic electrons accelerated by an ultra-shot laser pulse propagating through an underdense plasma. The dependence of thepositron beam properties on the plasma length and secondary target (converter) thickness was investigated in detail. The simulation results reveal that the positron yield is strongly correlated with the total energy of laser-accelerated electrons; both the temperature and divergence of the positron beam are sensitive to the plasma length; and the positron beam has a pulse duration comparable to the incident electron beam. In addition, it is indicated that even with the optimal converter thickness, only a small fraction (11.4%) of positrons can escape out and most of the detected positrons originate from the back edge of the converter.

Positron Generation Via Ultra-Intense Laser Irradiating a Tapered Hollow Foam-Like Target

High-Flux Low-Divergence Positron Beam Generation from Ultra-Intense Laser Irradiated A Tapered Hollow Target

Simulation Study of Positron Beam Generation Via Irradiating an Ultra-Intense Laser on a Hollow Target

High-quality GeV Proton Beam Generation from Multiple-Laser Interaction with Double-Layer Target

Enhanced positron acceleration driven by femto-second laser pulses irradiating structured targets

High-Energy Monoenergetic Protons from Multistaged Acceleration of Thin Double-Layer Target by Circularly Polarized Laser

High-flux Positrons Generation Via Two Counter-Propagating Laser Pulses Irradiating Near-Critical-density Plasmas

Tens GeV Positron Generation and Acceleration in a Compact Plasma Channel

Positron generation via ultra-intense circularly polarized laser pulses colliding in near-critical-density plasmas with different thickness

Positron Generation Via Ultra-Intense Laser Pulses Colliding in a Cylinder Filled with Near-Critical-density Plasmas

High-Yield High-Efficiency Positron Generation in High-Z Metal Targets Irradiated by Laser Produced Electrons from Near-Critical Density Plasmas

Enhancement of positron yields using multi-layer targets irradiated by laser-induced energetic electrons

High-flux positron generation via the ultra-intense laser irradiating density-modulated plasmas

Copious Positron Production by Femto-Second Laser Via Absorption Enhancement in a Microstructured Surface Target

Enhanced Electron–positron Pair Production by Ultra Intense Laser Irradiating a Compound Target

Terahertz-driven Positron Acceleration Assisted by Ultra-Intense Lasers.

Generation of High-Density High-Polarization Positrons via Single-Shot Strong Laser-Foil Interaction

Positron Generation Via Two Sequent Laser Pulses Irradiating a Solid Aluminum Target

Ultrarelativistic Polarized Positron Jets Via Collision of Electron and Ultraintense Laser Beams

Simulation Study of Indirect Positron Generation by an Ultra-Short Laser