Recycled Polyethylene and Crumb Rubber Composites Modified Asphalt with Improved Aging Resistance and Thermal Stability

Yuetan Ma,Shifeng Wang,Hongyu Zhou,Wei Hu,Pawel Polaczyk,Baoshan Huang

DOI: https://doi.org/10.1016/j.jclepro.2021.130102

IF: 11.1

2022-01-01

Journal of Cleaner Production

Abstract:Crumb rubbers (CR) and recycled Polyethylene (PE) are commonly used as modifiers to improve the asphalt properties. However, the addition of these modifiers individually may result in phase separation of PE and inadequate degradation of CR, which may not simultaneously satisfy the rheological and aging resistance of the binder blends. In this study, a type of CR/PE composites manufactured through melt extrusion procedures was adopted for the improvement of the modified binder blends. The modified binder blends after short-term (RTFO) and long-term (PAV) aging were collected for dynamic shear rheometer and bending beam rheometer tests. FTIR tests were also used to quantify the aging resistance, while differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were applied to evaluate the thermal behaviors of the binder blends. Optical microscopy tests were used to explore the modification mechanism and visualize the microstructures of original and PAV aged binder blends. Test results showed that CR/PE composites could significantly improve the aging resistance of the binder blends. The dispersed PE particles still interacted with each other and meanwhile worked with the diffused rubbery phase, which could form a similar TPEs network. The oxidation and high-temperature aging of such binder blends would strengthen the network that resisted the aging severity of the binder blends. It was also revealed that CR/PE modified asphalt could sustain more heat before a rapid degradation and the well dispersed PE particles could interact with the diffused CR particles to form a network to resist aging.