Abstract:The global increase in population and rapid urbanization has been followed by a growing generation of municipal solid wastes and construction and demolition sector wastes. This has put increasing pressure on countries around the world to come up with sustainable ways to deal with issues related to waste generation, climate change, and social and environmental degradation. This paper investigates a novel means of co-utilization of municipal solid wastes (MSW) with gypsum wastes from the construction and demolition sector for energy recovery and materials recycling and explores synergistic improvement in their processed value. We investigated high-temperature pyrolysis and gasification under different gasifying environments of inert (N 2 ), 10 % O 2 , 20 % CO 2 , and 70 % H 2 O at two different temperatures of 800 and 900 °C, in a semi-batch fixed bed reactor. Syngas obtained was analyzed for its composition and yield, while the solid residue obtained was analyzed for the crystalline phases of the inorganic content using powder-XRD (X-ray diffraction) diagnostics. These analyses revealed that increasing temperature as well as the addition of gypsum can significantly improve the carbon conversion and overall product gas yields. When comparing the gasifying environments, steam gasification provided increased syngas mass yields by up to 184 %, 425 % and 377 % respectively, as compared to CO 2 gasification, O 2 gasification, and pyrolysis environments. Adding gypsum at equal mass proportions (1:1) to MSW pyrolysis at 900 °C increased the syngas yield by 10 % compared to the non-catalytic case, while adding it at 800 °C reduced syngas yield by 6 % compared to the non-catalyzed pyrolytic case at 800 °C. Adding gypsum during O 2 gasification increased the syngas yield by 25 % compared to the non-catalytic cases at 900 °C and increased by 12.5 % at 800 °C. However, the syngas yield was reduced by 84 % when gypsum was added at equal mass proportions (1:1) to steam gasification of MSW at 900 °C and 50 % for 800 °C. Adding gypsum to CO 2 gasification also reduced the cumulative yield of syngas for both temperatures under investigation. However, the syngas quality was improved with gypsum addition as the yields of hydrocarbon were reduced. The char/solid residue was found to contain significant portions of CaS suggesting sulfur fixation capability of this process into the ash which can improve the ash characteristics in terms of metal recovery along with the improved waste conversion.

A Pilot-Scale Demonstration of Municipal Solid Waste Conversion to Energy and Resource Through Gasification and Dehumidification System

A Steam Dried Municipal Solid Waste Gasification and Melting Process

CFD-DEM simulations of municipal solid waste gasification in a pilot-scale direct-melting furnace

Performance Assessment of a Municipal Solid Waste Gasification and Power Generation System Integrated with Absorption Heat Pump Drying

Pyrolysis of Plastics-Free Refuse Derived Fuel Derived from Municipal Solid Waste and Combustion of the Char Products in Lab and Pilot Scales: A Comparative Study

Conversion of landfilled waste-to-electricity (WTE) for energy efficiency improvement in Shenzhen (China): A strategy to contribute to resource recovery of unused methane for generating renewable energy on-site

Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification

Experimental study on MSW gasification and melting technology

Energy conversion performance in co-hydrothermal carbonization of sewage sludge and pinewood sawdust coupling with anaerobic digestion of the produced wastewater

Novel Strategy for Efficient Energy Recovery and Pollutant Control from Sewage Sludge and Food Waste Treatment.

Pilot-scale study on downdraft gasification of municipal solid waste with mass and energy balance analysis

Real-world assessment of a decentralized food waste anaerobic digestion system: A test-bedding case study application

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Techno-economic Analysis of Auto-Thermal Gasification of Municipal Solid Waste with Ash Direct Melting for Hydrogen Production

Pilot-scale anaerobic co-digestion of municipal biomass waste: Focusing on biogas production and GHG reduction

Pilot-scale treatment of municipal garbage mechanical dewatering wastewater by an integrated system involving partial nitrification and denitrification

Comprehensive experimental study on energy conversion of household kitchen waste via integrated hydrothermal carbonization and supercritical water gasification

Cascading disposal for food waste by integration of hydrothermal carbonization and supercritical water gasification

Gasification of municipal solid wastes with gypsum wastes under different gasifying environments

Gasification and Melting Characteristics of MSW in China

Treatment of digestate residues for energy recovery and biochar production: From lab to pilot-scale verification