Abstract:This study presents a particle swarm optimization (PSO) algorithm‐assisted neural‐network‐based inverse kinematics solution for a 4‐DoF (degree‐of‐freedom) cotton harvesting robot. A novel setup was developed to measure the three‐dimensional locations of in‐field cotton bolls. Dimensional optimization of the manipulator was conducted using the PSO algorithm to minimize torque requirements at joints. With the optimized links' lengths, the targeted end‐effector positions were achieved effectively (coefficient of determination (R2) > 99.88). The genetic algorithm optimized the neural network architecture to include three hidden layers with [64 64 32] neurons, identifying the Tanh activation function as the optimal configuration. A custom loss function was used during the training of artificial neural network (ANN). Using angles predicted by the trained ANN, the end‐effector reached targeted positions with positioning errors below 13.0 mm. A hybrid model consisting of an ANN and PSO algorithm was developed to further reduce the error. This trained hybrid model resulted in a positioning error below 1.0 mm with inference time of 6.07 s during simulation phase. As compared to the ANN and PSO algorithm, hybrid model reduced the positioning error and inference time (>40.0%), respectively. For hybrid model, the mean percentage errors of 0.25%, 0.39%, and 0.84% were observed along the x‐, y‐, and z‐axis. A positioning error below 9.0 mm occurred during evaluation of the hybrid model with the fabricated manipulator. Hence, the developed hybrid model precisely determines the joint angles, allowing the end‐effector of the cotton harvesting robot to reach at targeted pose with minimum error.

Forward Kinematics of Parallel Robot Based on Neural Network Newton-Raphson Iterative Algorithm

Forward Position Analysis of 3-RPS Parallel Mechanism based on ADE-Newton algorithm

Real-time solution of the forward kinematics for a parallel haptic device using a numerical approach based on neural networks

Forward Kinematics Solution of Cable Robot based on Neural Network and L-M Algorithm

Forward Kinematics Analysis of Parallel Robots Using Global Newton-Raphson Method

Kinematic Modelling of a 3RRR Planar Parallel Robot Using Genetic Algorithms and Neural Networks

A New Theoretical Method for Solving Forward Kinematics of the Parallel Mechanisms Based on Transfer Matrix

Parallel Robots Pose Accuracy Compensation Using Artificial Neural Networks

Kinematics and workspace analysis of 4SPRR-SPR parallel robots

Optimizing cotton‐picking robotic manipulator and inverse kinematics modeling using evolutionary algorithm‐assisted artificial neural network

Kinematics of Novel 6-HTRT Parallel Robot

Modeling and Analysis of A Parallel Continuum Robot Using Artificial Neural Network

Forward Kinematics Analysis of Parallel Manipulator Using Modified Global Newton-Raphson Method

Pre-Train-Based Neural-Learning Control of a Novel Parallel Robot by Local Model Approximation

The Forward Kinematic Closed Solution of 3-RSR Parallel-structure Robot

Forward and inverse kinematics of a 5-DOF hybrid robot for composite material machining

Comparison of numerical and neural network methods for the kinematic modeling of a hybrid structure robot

Kinematics analysis of a novel hybrid manipulator for optomechanical modules assembly

An Algorithm for Solving Robot Inverse Kinematics Based on FOA Optimized BP Neural Network

Performance analysis and error compensation of a 6-DOF parallel robot

Kinematic and Nonparametric Calibration of a Parallel Machining Robot Based on an Artificial Neural Network