Abstract:Key FindingsThe proposed BCC transceiver is as follows:• It is capable of operating in both high data rate and low data rate using the frequency divider.• Able to track the data error and correct automatically results in better bit error rate (BER) results. Also, the proposed BCC transceiver maintains a BER ratio of less than 10−8 with data delay of 10 ns.• It is a compact size since it utilizes the less area when compared to existing BCC transceivers. Summary In this work, a digital differential transmitter based on low‐power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code‐based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error‐correcting parallel turbo decoder using a modified step‐by‐step algorithm is presented. The turbo code‐based decoding scheme is used to recover the error‐free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm2. Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.

A 10-Mbps 119.2-Pj/bit Software Defined Body Channel Transceiver Employing a CCII-based PGA and a 2.5-Bit/cycle ADC in 180-Nm CMOS

D-band CMOS Transmitter and Receiver for Multi-Giga-bit/sec Wireless Data Link

Integrated D-Band Transmitter and Receiver for Wireless Data Communication in 65 Nm Cmos

A 2 GS/s 14-Bit Current-Steering DAC in 65 Nm CMOS Technology for Wireless Transmitter

An 11.05 Mw/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With A 2-Tap Adaptive Dfe And A 3-Tap Transmit Ffe In 40 Nm Cmos

A 4-Mbps 41-pJ/bit On-off Keying Transceiver for Body-channel Communication with Enhanced Auto Loss Compensation Technique

Design of high‐speed data transfer turbo code for body channel communication transceivers

A 60Mb/s -64dBm Body Channel Communication Transceiver Utilizing Manchester Code

Design of a Software-Defined Transceiver with High Flexibility for Sensing Applications

A Millimeter Wave Digital CMOS Baseband Transceiver for Wireless LAN Applications

A Re-Configurable Body Channel Transceiver Towards Wearable and Flexible Biomedical Sensor Networks

A 32gb/s 133mw PAM-4 Transceiver with DFE Based on Adaptive Clock Phase and Threshold Voltage in 65nm CMOS.

A 3.52 Gb/s Mmwave Baseband with Delayed Decision Feedback Sequence Estimation in 40 Nm.

A 5-Gb/s 156-Mw Transceiver with Ffe/Analog Equalizer in 90-Nm Cmos Technology

A 2m-Range 711μW Body Channel Communication Transceiver Featuring Dynamically-Sampling Bias-Free Interface Front End

A Fully Integrated Bit-to-Bit 24/48Gb/s QPSK/16-QAM D-Band Transceiver with Mixed-Signal Baseband in 28nm CMOS Technology.

A 70 Mw 25 Gb/s Quarter-Rate SerDes Transmitter and Receiver Chipset with 40 Db of Equalization in 65 Nm CMOS Technology

A Fully Integrated Bit-to-Bit 24/48gb/s QPSK/16-QAM D-Band Transceiver with Mixed-Signal Baseband in 28nm CMOS Technology

A 2.29-Pj/b 112-Gb/s Wireline Transceiver with RX Four-Tap FFE for Medium-Reach Applications in 28-Nm CMOS

A 190mw 40gbps Serdes Transmitter and Receiver Chipset in 65nm Cmos Technology

A 6.3pJ/b 30Mbps -30dB SIR-tolerant Broadband Interference-Robust Human Body Communication Transceiver using Time Domain Signal-Interference Separation