Abstract:The Ni-Fe-based superalloy GH4169 (Inconel718) is widely used for several critical gas-turbine components which are hot forged. Its microstructure and property are sensitive to the parameter adjustment during hot working process. To obtain required low-cycle fatigue and fracture properties, it is essential that the microstructure is controlled during preheating and heat treatment. The evolution of non-uniform microstructure during hot working is more complicated than that of uniform microstructure. On the other hand, various secondary phases can be observed in GH4169 alloy, thus it is important to investigate the effect of secondary phases on the microstructure evolution during forging process. In this work, the mechanisms of non-uniform microstructure evolution in GH4169 alloy were studied by analyzing the evolution of secondary phases, grain boundary misorientation, grain size and interactions of dislocation. It is found that the volume fraction of 8 phase increases with the increasing of temperature and heating time at the lower temperature. While at the higher temperature, it decreases monotonously with the temperature increasing, but increases first and then decreases to stable value with time increasing. The pinning effect of secondary phases in GH4169 alloy can be concluded that the gamma '' phase and 8 phase precipitated within the grains retain movement of dislocation, the 8 phase precipitated at the grain boundary hinders the nucleation and growth of recrystallized grains, and the carbides limits the grain growth. The frequency of low angle grain boundary decreases with temperature and time increasing, and the mobility of low angle grain boundary increases with temperature increasing. The uniformity of microstructure and the size of equaxied subgrain increases with heating temperature and time increasing. Continuous recrystallization of elongated grain occurs at specific conditions. The mechanisms of non-uniform microstructure evolution during heating process can be concluded as sub grain growth, recrystallized grain growth, and anneal twinning nucleation and growth. The recrystallized grains are formed by the growth of subgrains conducted by the rotation of low angle grain boundary and the movement of dislocation. When the grain growth is pinned, the mechanisms for the energy dissipation is the nucleation and growth of anneal twinning. And the growth of anneal twinning promotes the generation of low angle grain boundaries at the tip of partial anneal twinning.

Microstructural Origin and Control Mechanism of the Mixed Grain Structure in Ni-based Superalloys

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Controlling Grain Size Via Dynamic Recrystallization in an Advanced Polycrystalline Nickel Base Superalloy

Mechanisms of Non-Uniform Microstructure Evolution in Gh4169 Alloy During Heating Process

Mechanisms of DRX Nucleation with Grain Boundary Bulging and Subgrain Rotation During the Hot Working of Nickel-Based Superalloys with Columnar Grains

Microstructure Control and Micromechanical Property Enhancement of CoCrFeNiZr 0.5 Alloy under Melt Quenching and Electrostatic Levitation Conditions

Description of Grain Evolution Behaviors in Mesoscale During Electrical-Thermal-Mechanical Coupling Compression Processes for Ni80A Superalloy

Microstructure control and DRX characteristics of Ni-Co-W superalloys affected by changing deformation direction on [001] columnar grain

Investigation on Mechanism of Microstructure Evolution During Multi-Process Hot Forming of GH4169 Superalloy Forging

Effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment

Microstructural evolution and dynamic recrystallization mechanism of a heavily-alloyed Ni-based superalloy during hot extrusion

Microstructure Evolutions and Nucleation Mechanisms of Dynamic Recrystallization of A Powder Metallurgy Ni-Based Superalloy During Hot Compression

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy

Dynamic recrystallization mechanisms of as‐extruded GH4151 alloy during hot deformation

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Fine grained microstructure crystallographic feature and its effect on mechanical behavior in Ni–Cr–W superalloy

Characteristic and Mechanism of Dynamic Recrystallization in a Newly Developed Fe-Cr-Ni-Al-Nb Superalloy During Hot Deformation

Microstructural and Compositional Design of Ni-based Single Crystalline Superalloysd - A Review

Grain Refinement and Texture Evolution During High Precision Machining of A Ni-Based Superalloy

An Innovative Approach of Parameter Loading Path Design for Grain Refinement and Its Application in Ni80A Superalloy

Strain Amount Dependent Grain Size And Orientation Developments During Hot Compression Of A Polycrystalline Nickel Based Superalloy