Abstract:A miniaturized attitude control system (ACS), which is capable of attaining a high spin rate and good pointing accuracy, is an integral part of any small spacecraft. In this regard, embedded magnetorquers are gaining significant attention because they are inserted in printed circuit board (PCB) internal layers with no extra space occupation and result in almost no mass and development cost. In this article, an innovative embedded magnetorquer with asymmetric nonuniform geometric structure is presented. The proposed magnetorquer is optimized for various parameters of interest, i.e., magnetic moment, resultant generated torque, power consumed, and heat dissipation for a CubeSat standard nanosatellite by means of employing diverse nonunity track-width-ratio geometrical arrangements. The magnetorquer driver and reconfigurable circuit is implemented with commercial-off-the-shelf (COTS) components which are low cost and easily available from the market. Embedded coils with variable trace width were simulated in order to predict the accuracy and to achieve the maximum torque versus power dissipation ratio of the developed models. Time-varying rotational analyses are performed to evaluate the angular spin rates driven by the asymmetric coils. Due to embedded coil structure, a detailed thermal analysis is conducted for various coil configurations (i.e., series, parallel, hybrid, etc.) to preserve thermal limits and to ensure the efficacy of the system. The simulation results were validated through a comprehensive set of experimental measurements which also establishes the framework for selecting the optimal coils configuration based on specific mission requirements.

A High Thrust Density Voice Coil Actuator with a New Structure of Double Magnetic Circuits for CubeSat Deployers

Relative roll control of satellite docking using electromagnetic coils

A Solution Using Only Electromagnetic Coils for Relative Pose Control in Satellite Docking

Armature Reaction Analysis and Suppression of Voice Coil Actuator Based on an Improved Magnetic Equivalent Circuit Model

Design and Analysis of a New Deployer for the in Orbit Release of Multiple Stacked CubeSats

Reconfigurable Asymmetric Embedded Magnetorquers for Attitude Control of Nanosatellites

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

Nonlinear Programming Control Using Differential Aerodynamic Drag for CubeSat Formation Flying

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Optimized Design of Embedded Air Coil for Small Satellites with Various Dimensions

Design, Analysis and Test of a Hyperbolic Magnetic Field Voice Coil Actuator for Magnetic Levitation Fine Positioning Stage

Optimized Design and Analysis of Printed Magnetorquer for a 3-U Nano-Satellite

Modeling and Analysis of Flexure-based Nano-Positioning Device Driven by Voice Coil Actuator

A Planar Electromagnetic Actuator With Passive Adsorption for CubeSats Transport in a Weightless Environment

Design and Analysis of a Novel Modular Electromagnetic Actuator for Micro-Nano Satellite Application

Active Attitude Control for Microspacecraft; A Survey and New Embedded Designs

An Observer-Based Active Vibration Isolation System Using the Voice-Coil Actuator

Magnetic-based Attitude Control Scheme for CubeSat

Design and Positioning Control of a Flexure-Based Nano-positioning Stage Driven by Halbach Array Voice Coil Actuator

Design Of Active Whole-Spacecraft Vibration Isolation Based On Voice-Coil Motor

Advanced Magnetic Coupler Design With Multi-Directional Anti-Misalignment Capabilities for Wireless Charging Unmanned Aerial Vehicles