Abstract:Reducing fluid frictional drag at the solid–liquid interface is a promising strategy for improving the hydrodynamic properties of the structure in water, though so far it has remained unattainable without robust air cavities. Herein, we report a durable generation strategy of robust air cavity on the rough microstructured surface, which could achieve stable drag reduction even after 2000th water entry test. It is worth noting that the generation strategy is almost independent of the wear of surface microstructure, as the worn microstructures still keep a rough morphology and would alter the capillary driving force and prevent the spreading of the liquid film along the structure body. Therefore, the triple contact line is pinned at the solid–liquid interface and induces the generation of a complete air cavity. Comprehensive evaluation, including the mechanical and chemical stability tests, confirm that the microstructured spheres could produce robust cavities even after harsh destruction, and they also reduce the hydrodynamic drag by more than 70.8% at a higher Reynolds number of ∼4.9 × 10 4 . Finally, the boundary slip at the solid–liquid interface of the microstructured surface is simulated, which concludes that the decrease in the contact angle at air–liquid interface and fraction of solid–liquid contact area on the wall would enhance the slip length of fluid, thus resulting in an obvious decreasing of frictional resistance at the solid–liquid interface. We believe that the present work provides a perspective on the sustainable construction of the robust cavity which may have important potential application value in the field of drag reduction.

Experimental Study on Microbubble Drag Reduction on Soil-Steel Interface

Experimental And Numerical Study Of Bubble Drag Reduction On A Flat Plate

Direct Numerical Simulation of Skin Friction Drag Reduction on Supersonic Turbulent Boundary Layers with Micro-Blowing

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Stream-Wise Distribution of Skin-Friction Drag Reduction on A Flat Plate with Bubble Injection

Comparison Between Microbubble Drag Reduction and Viscoelastic Drag Reduction

Influence of entrapped gas morphology at liquid–solid interface on underwater drag reduction effect

Numerical simulation study on the drag reduction characteristics of grooves-microbubbles coupling surfaces

Development of microbubble generation method

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Study of Drag Forces on a Designed Surface in Bubbly Water Lubrication Using Electrolysis

Experimental Investigation on Underwater Drag Reduction Using Partial Cavitation

Experimental Investigation into Cyclic Shear Behaviors in the Interface Between Steel and Crushed Mudstone Particles

Numerical Study of the Influence of the Type of Gas on Drag Reduction by Microbubble Injection

Drag Reduction Technology of Water Flow on Microstructured Surfaces: A Novel Perspective from Vortex Distributions and Densities

Experimental study on mechanism of stable drag reduction with hydrogel interface

Microbubble effect on friction drag reduction in a turbulent boundary layer

Feasibility analysis of drag reduction using trapped micro-bubbles by water electrolysis

Experimental Study on the Drag Reduction Effect of a Rotating Superhydrophobic Surface in Micro Gap Flow Field

Experimental study on nanobubble distribution control method based on the slip drag reduction effect

Robust air cavity generation on sacrificial microstructures for sustainable underwater drag reduction