Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Performance Evolution of Niobium Doped Lanthanum Strontium Ferrate Perovskite Anode for Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Niobium Doped Lanthanum Strontium Ferrite As A Redox-Stable and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells.

Efficient and Stable Iron Based Perovskite La0.9Ca0.1Fe0.9Nb0.1O3-δ Anode Material for Solid Oxide Fuel Cells

Nb-doped La0.6Sr0.4FeO3−δ as an electrolyte for intermediate-temperature solid oxide fuel cells

La 3+-Substituted Sr2Fe1.5Ni0.1Mo0.4O6-δ As Anodes for Solid Oxide Fuel Cells

Niobium doped lanthanum calcium ferrite perovskite as a novel electrode material for symmetrical solid oxide fuel cells

High-performance and Stable La0.8Sr0.2Fe0.9Nb0.1O3-δanode for Direct Carbon Solid Oxide Fuel Cells Fueled by Activated Carbon and Corn Straw Derived Carbon

Structural and Electrochemical Property Evolutions of Perovskite SOFC Anodes: Role of Fuel Atmosphere in (La0.4sr0.6)1-Co0.2fe0.7nb0.1o3-δ

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

A Highly Efficient and Robust Perovskite Anode with Iron-Palladium Co-exsolutions for Intermediate-Temperature Solid-Oxide Fuel Cells

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Sulfur Tolerant Redox Stable Layered Perovskite SrLaFeO4 − Δ As Anode for Solid Oxide Fuel Cells

Performance Evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ As Both Anode and Cathode Material in Solid Oxide Fuel Cells

Stability and Electrochemical Performance of Lanthanum Ferrite-Based Composite Sofc Anodes in Hydrogen and Carbon Monoxide

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Alkaline-earth-free Quasi-Ternary La(Co, Ni, Fe)O3-delta Perovskite As Potential Cathode for Solid Oxide Fuel Cells

Nanoparticle Surface Modification Enhanced Anode Performance in La1.7Sr0.3Fe0.9Ru0.1O4for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced Performance of Solid Oxide Fuel Cells with Ni/CeO2 Modified La0.75Sr0.25Cr0.5Mn0.5O3− Anodes