Abstract:Purpose The purpose of this paper is to design and validate an electronic nose (E-nose) prototype using commercially available metal oxide gas sensors (MOX). This prototype has a sensor array board that integrates eight different MOX gas sensors to handle multi-purpose applications. The number of sensors can be adapted to match different requirements and classification cases. The paper presents the validation of this E-nose prototype when used to identify three gas samples, namely, alcohol, butane and cigarette smoke. At the same time, it discusses the discriminative abilities of the prototype for the identification of alcohol, acetone and a mixture of them. In this respect, the selection of the appropriate type and number of gas sensors, as well as obtaining excellent discriminative abilities with a miniaturized design and minimal computation time, are all drivers for such implementation. Design/methodology/approach The suggested prototype contains two main parts: hardware (low-cost components) and software (Machine Learning). An interconnection printed circuit board, a Raspberry Pi and a sensor chamber with the sensor array board make up the first part. Eight sensors were put to the test to see how effective and feasible they were for the classification task at hand, and then the bare minimum of sensors was chosen. The second part consists of machine learning algorithms designed to ensure data acquisition and processing. These algorithms include feature extraction, dimensionality reduction and classification. To perform the classification task, two features taken from the sensors' transient response were used. Findings Results reveal that the system presents high discriminative ability. The K-nearest neighbor (KNN) and support vector machine radial basis function based (SVM-RBF) classifiers both achieved 97.81% and 98.44% mean accuracy, respectively. These results were obtained after data dimensionality reduction using linear discriminant analysis, which is more effective in terms of discrimination power than principal component analysis. A repeated stratified K-cross validation was used to train and test five different machine learning classifiers. The classifiers were each tested on sets of data to determine their accuracy. The SVM-RBF model had high, stable and consistent accuracy over many repeats and different data splits. The total execution time for detection and identification is about 10 s. Originality/value Using information extracted from transient response of the sensors, the system proved to be able to accurately classify the gas types only in three out of the eight MQ-X gas sensors. The training and validation results of the SVM-RBF classifier show a good bias-variance trade-off. This proves that the two transient features are sufficiently efficient for this classification purpose. Moreover, all data processing tasks are performed by the Raspberry Pi, which shows real-time data processing with miniaturized architecture and low prices.

A Novel Gas Identification Method Based on Gabor Spectrogram Using Self-adapted Temperature Modulated Gas Sensors

The recognition of Chinese spirits using electronic nose with dynamic method

A Novel Sparse Representation Classification Method for Gas Identification Using Self-Adapted Temperature Modulated Gas Sensors.

High performance of gas identification by wavelet transform-based fast feature extraction from temperature modulated semiconductor gas sensors

A Self-Temperature-Modulated Quadrilateral Gas Sensor for Gas Identification

Novel combined waveform temperature modulation method of NiO-In2O3 based gas sensor for measuring and identifying VOC gases

Identification of Gas Mixtures by a Distributed Support Vector Machine Network and Wavelet Decomposition from Temperature Modulated Semiconductor Gas Sensor

A New Method in the Gas Identification by Using Mos Gas Sensor Based on the Temperature-Programmed Technique

Short Period Sinusoidal Thermal Modulation for Quantitative Identification of Gas Species

Multicomponent Gas Detection Method Via Dynamic Temperature Modulation Measurements Based on Semiconductor Gas Sensor

Short-Time Fourier Transform and Decision Tree-Based Pattern Recognition for Gas Identification Using Temperature Modulated Microhotplate Gas Sensors

A Gas Concentration Estimation Method Based on Multivariate Relevance Vector Machine Using MOS Gas Sensor Arrays.

Detection of Four Alcohol Homologue Gases by ZnO Gas Sensor in Dynamic Interval Temperature Modulation Mode

The design and validation of a fast and low-cost multi-purpose electronic nose for rapid gas identification

Gas Identification by Wavelet Transform-Based Fast Feature Extraction and Support Vector Machine from Temperature Modulated Semiconductor Gas Sensors

Detection of Volatile Organic Compounds by Using A Single Temperature-Modulated Sno2 Gas Sensor and Artificial Neural Network

Detection and Recognition of Toluene and Butanone in Mixture Based on SnO2 Sensor Via Dynamic Transient and Steady-State Response Analysis in Jump Heating Voltage Mode

An Algorithm Based on Transformer and Temporal Convolution Network for Early Identification of Ternary Gas Mixture

Temperature Modulated Gas Sensing E-Nose System for Low-Cost and Fast Detection

Monitoring of Gases Based on Single Sensor’s Dynamic Detection and Neural Network

Selective Sensing of Gas Mixture Via a Temperature Modulation Approach: New Strategy for Potentiometric Gas Sensor Obtaining Satisfactory Discriminating Features.