Abstract:Currently, there is great demand for automated assembly of equipment inside spacecraft module, which would require an assembly robot with small size, large workspace, high load capacity, and high flexibility. To meet this demand, a redundant seven-degree-of-freedom (7-DOF) assembly robot with three prismatic joints and four rotating joints is proposed in this study. First, a kinematic model of the assembly robot is established, and the positional forward kinematics are derived. Then, the positional inverse kinematic equations are derived by using the fixed joint method and the coordinate inverse transformation method for the characteristics of the robot with redundant degrees of freedom. The inverse solution optimization model of the assembly robot is designed based on genetic algorithm, and B-spline interpolation algorithm is used for joint trajectory planning. Next, NSGA-2 algorithm is used to construct the trajectory optimization model, and the time-pulsation multi-objective Pareto optimal frontier is obtained. Finally, the joint simulation model of mechatronics and the prototype experiment are established to verify the effectiveness of the optimization results. Analysis shows that the proposed assembly robot has better load-bearing capacity and dynamic characteristics than similar existing assembly robots. Furthermore, the segmented trajectory optimization strategy for the assembly robot using inverse solution optimization, interpolation algorithm, and NSGA-2 based multi-objective optimization gets each motion joint to realize the trajectory tracking function quickly and stably, and the trajectory tracking error is small enough to meet the requirements of end positioning accuracy.

Design of an Universal Installation Method for Spacecraft Heavy-weight Instruments Based on Adjustable Robot End-effector

Design Of An End-Effector For Spacecraft Automatic Assembly Robot

Design of a Visual Guidance Robotic Assembly System for Flexible Satellite Equipment Unit Assembly.

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

Autonomous Assembly Method of 3-Arm Robot to Fix the Multipin and Hole Load Plate on a Space Station

Design and Simulation of On-Orbit Assembly System Based on Insect-Inspired Transportation

Design and Preliminary Ground Experiment for Robotic Assembly of a Modular Space Telescope

Design of a space dual-arm robot and its ground microgravity simulation platform

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A Method of Human-Like Compliant Assembly Based on Variable Admittance Control for Space Maintenance

Pose Measurement and Assembly of Spacecraft Components Based on Assembly Features and a Consistent Coordinate System

An ultra-compact mechanical interface universal design for orbital replacement unit

Assembly Strategy for Modular Components Using a Dual-Arm Space Robot with Flexible Appendages

A high-accuracy pose measurement system for robotic automated assembly in large-scale space

Flexible force control on robot arm for spacecraft assembly

A Dimension Reduced Ground Test Method of Dual-arm Space Robot for On-orbit Assembly

Design and motion planning of a 7-DOF assembly robot with heavy load in spacecraft module

Design and Analysis of the Mechanical Structure of a Robot System for Cabin Docking

Design and Application of Satellite Automatic Angle Measurement System Based on Robot

Design and Experimental Study of Space Manipulator Simulator System

Robust control of a dual-arm space robot for in-orbit screw-driving operation