Abstract:Bionic porous structure has been widely used in the field of bone implantation, because it can imitate the topological structure of bone, reduce the elastic modulus of metal bone implantation, and meet the mechanical properties and material transmission characteristics after implantation. This paper mainly studies the effects of different bionic porous structures on the mechanical and material transport properties of bone scaffolds. Firstly, under the same porosity condition, 12 groups of bionic porous structures with different shapes were designed, including G, P, D, I-type three period minimal surface (TPMS) and Voronoi porous structures with different irregularities. Then uses ABAQUS to carry out mechanical finite element simulation on different bionic porous structures, and uses Ti-6Al-4V alloy as forming material, uses laser powder bed fusion technology (LPBF) to prepare the scaffold, then carries out compression experiments. At the same time, COMSOL software is used to simulate the flow characteristics, analyze the permeability characteristics, and verified through cell experiment in vivo . The results show that the mechanical and permeability are different with vary scaffolds. In terms of topology, the morphological characteristics of TPMS are similar to trabecular bone, its compressive strength is relatively strong. Voronoi scaffold has lower elastic modulus, which can provide sufficient mechanical support while reducing stress shielding. In addition, the permeability of TPMS scaffold is better than Voronoi scaffold, which is helpful to promote cell proliferation and bone ingrowth. These bionic porous structures have their own advantages. Therefore, when designing porous structures for bone implantation, it is necessary to select the appropriate porous structure according to different bone implantation requirements. The research will help promote the clinical application of porous structures in the field of bone implantation, and provide theoretical support for the exploration of bone implantation structure design.

Compressive Properties and Numerical Simulation of Porous Structure Fabricated by Laser Powder Bed Fusion

Personalized Artificial Tibia Bone Structure Design and Processing Based on Laser Powder Bed Fusion

Design and 3D Printing of Interbody Fusion Cage Based on TPMS Porous Structure

Compressive properties and deformation mechanism of selective laser melting of Ti6Al4V porous femoral implants based on topological optimization

Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing

Design and Mechanical Compatibility of Nylon Bionic Cancellous Bone Fabricated by Selective Laser Sintering

Research on Design and Performance of High-Performance Porous Structure Based on 3D Printing Technology

Design of Porous Structure Based on the Voronoi Diagram and Stress Line for Better Stress Shielding Relief and Permeability

Compressive properties and energy absorption of selective laser melting formed Ti-6Al-4V porous radial gradient scaffold

Evaluation of Compressive and Permeability Behaviors of Trabecular-Like Porous Structure with Mixed Porosity Based on Mechanical Topology

Porous structure design and properties of dental implants

A novel methodology for developing dense and porous implants on single generic optimized setting for excellent bio-mechanical characteristics

Quantitative evaluation on mechanical characterization of Ti6Al4V porous scaffold designed based on Weaire-Phelan structure via experimental and numerical analysis methods

The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction

Design and mechanical testing of porous lattice structure with independent adjustment of pore size and porosity for bone implant

Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting

Compressive properties and biocompatibility of additively manufactured lattice structures by using bioactive materials

Topological Design of a Trabecular Bone Structure With Morphology and Mechanics Control for Additive Manufacturing

Quasi-Static compressive responses and fatigue behaviour of Ti-6Al-4 V graded lattice structures fabricated by laser powder bed fusion

Numerical design of open-porous titanium scaffolds for Powder Bed Fusion using Laser Beam (PBF-LB)

Analysis of mechanical characteristics and permeability of TPMS and Voronoi porous structure for bone scaffold