Abstract:East China Power Grid has the largest installed generation capacity among the regional power grids in China. Most of the installed generation capacities are in thermal power. With the building of very large hydro power plants in West China, an UHVDC system interconnecting with the area grids between East and West China is under construction and will be in operation in 2012. This UHVDC link with a 6.4 GW rated capacity will transmit the power generated from large hydro power plants to East China Grid over a long distance about 2000 km. With reference to the reliability issue for such an UHVDC connection with East China Grid, this paper proposes a reliability evaluation method and procedure for the large scale generation and transmission system with an UHVDC interconnection based on Monte Carlo simulation. The key techniques for implementation of reliability evaluation are introduced: 1) For the system state correction step in the procedure of reliability evaluation, sensitivity analysis method is hard to ensure the optimality of the state correction scheme. Although linear programming method is more rigorous, the scale of the problem is very large for a large scale composite generation and transmission system like the East China Grid. A new linear programming model is built to reduce the scale of the problem. The results of sensitivity analysis are utilized in this new model. 2) To accelerate the convergence speed of Monte Carlo Simulation, an importance sampling technique is designed. Different from commonly used importance sampling method, the multipliers are set as different values for different kind of components in the system according to their contributions to failure events. 3) East China Power Grid is a multi-infeed AC/DC power system. In order to highlight impact of the new UHVDC connection on power supply reliability of East China Power grid, the reliability indices of the existing HVDC systems are not evaluated in this paper, instead, they are considered as multi-state power sources to the East China Power Grid. The state table of the UHVDC system is specially built. 4) DC power flow is calculated in the procedure of reliability evaluation. But for large scale power systems, the active power loss may be larger than the capacity of several generating units. Neglecting loss will lead to some error to the results of reliability evaluation. A method is proposed to consider power loss in calculating DC power flows. A computation program is developed using C++ language. The case studies have been carried out on the planned 2012 East China power system with the UHVDC system connected. The objective of the reliability assessment has been focused on the system operation condition of the expected summer peak-load operation mode of East China Power Grid in 2012. Study results show the effectiveness of the proposed techniques. Moreover, sensitivity analyses are also carried out.

Analysis and Design of Energy Storage Capacity of AC-DC Hybrid Power Distribution Unit with Energy Storage to Improve the Reliability of Power Grid

Analysis of Energy Storage Technology for New Power System

Power Distribution Control Framework for Renewable Energy Architecture with Battery-Supercapacitor Based Hybrid Energy Storage Systems

Research on Optimal Allocation of Energy Storage in Active Distribution Network Based on Differential Particle Swarm Algorithm

Reliability evaluation of high permeability renewable energy distribution network considering energy storage charge and discharge strategy

Reliability Evaluation Method for AC/DC Hybrid Distribution Power Network Considering Cascaded Multiport Power Electronic Transformer

Energy Storage for 1500 V Photovoltaic Systems: A Comparative Reliability Analysis of DC- and AC-Coupling

Distributed Generation Capacity Planning Method of AC/DC Hybrid Distribution Network Based on Different Functions of Energy Storage

Study on a New Type of DC Distribution Network Containing Electric Vehicle Charge Station

Reliability Evaluation Of Hybrid Ac/Dc Power Systems

Modeling And Simulation Of Dc Distribution Network Based On Distributed Energy

Power Management of AC/DC Hybrid Distribution Network With Multi-Port PET Considering Reliability of Power Supply System

Optimization of Energy Storage System in Active Distribution Network Considering Operation Reliability

A Balanced Optimization Method for Energy Storage Capacity Allocation in New Power Systems under the Background of Carbon Reduction

Reliability Evaluation Method of AC/DC Hybrid Distribution Network Considering Voltage Source Converter Restoration Capability and Network Reconfiguration

Analysis and Construction of Typical Application Scenarios of Distribution Network Energy Storage Technology

Power Supply Reliability Assessment Including Island Division and Network Reconfiguration

Reliability analysis of bulk power system with an UHVDC connection

Distributed Energy Storage Cluster Control Method for DC Microgrid Considering Flexibility

Research On Hybrid Energy Storage Configuration In Industrial Estate