Experimental Investigations of Injector Internal Parameters Impact on Tip Wetting Using Laser-induced Fluorescence

Di Xiao,Shuyi Qiu,Tongyang Wang,Tianyun Li,David L. S. Hung,Jianye Su,Xuesong Li,Min Xu

DOI: https://doi.org/10.2218/iclass.2021.5927

2021-01-01

International Conference on Liquid Atomization and Spray Systems (ICLASS)

Abstract:Fuel film deposited on the injector tip would dramatically cause pool fire, tip deposits and incomplete combustions.Previous research indicated that tip wetting phenomenon had a strong relationship with various operation conditions such as injection pressure, ambient pressure, fuel temperature.Besides, several investigations found that the internal design parameters would affect the tip film generation.However, the effect of internal configurations on tip wetting was not clear, especially combined with typical engine operation conditions, which would provide great guidance to optimize the nozzle design and improve the fuel injection strategy.In this research, Laser-induced Fluorescence method was adopted to investigate the tip wetting process.The influence of in-nozzle configurations was thoroughly discussed using three injectors with different spray hole positions and structures.Three typical operating conditions were also taken into consideration.The film area and thickness were analysed as a function of time.It was found that under sub-cooled and long injection duration, the effect of spray hole position and structure on tip wetting film area and thickness distribution was pretty small, while under flash boiling conditions, the in-nozzle parameters became important.Larger tip wetting films appeared under a special designed spray hole arrangement, which should be taken into consideration to avoid potential deterioration of the combustion and emission performance.