Abstract:Organic-inorganic metal halide perovskite-based tandem solar cells have attracted significant research attention in recent years. The power conversion efficiency of perovskite-based tandem can efficiently meet the requirements of practical applications; however, their instability limits their commercialization. The most commonly used wide-bandgap perovskites suitable for top sub-cells, which are based on I/Br alloying at X site, often suffer from severe phase segregation. When exposed to light illumination, a smaller bandgap phase appears and acts as a carrier trap, leading to a reduction in the quasi-Fermi level splitting and large Voc deficit. The narrow-bandgap perovskites suitable for bottom sub-cells, which are based on Sn/Pb alloying at B sites, always face atmospheric instability. When exposed to air, Sn2+ is rapidly oxidized to Se, which can shorten the carrier diffusion length and result in a drop in efficiency. Herein, we summarize the recent advances in perovskite-based tandem solar cells from the viewpoint of stability. We analyzed the stability data of highly efficient perovskite-based tandems reported so far, such as perovskite/silicon, perovskite/perovskite, and perovskite/copper indium gallium selenide (CIGS) tandems. We found that the key to improve the perovskite-based tandems is to improve the stability of the perovskite sub-cells. Then, we systematically analyzed the phase and atmospheric instability of wide- and narrow-bandgap perovskite, respectively, providing some reasonable strategies to tackle the instability. Compositional engineering, crystallinity optimization, and employing other perovskites with wide bandgaps are effective means to avoid phase instability of the I/Br alloying perovskite. Introducing the reducing additives, improving the film morphology, and forming a 2D/3D structure can help in improving the atmospheric stability of Sn-Pb narrow bandgap perovskites. Furthermore, we review the intrinsic instability of perovskite and corresponding improvement methods, which are inevitable in future tandem solar cells. By reducing the methylamine (MA) content in perovskite component and suppressing ion migration, the long-term operational stability is greatly enhanced. Finally, we briefly summarize the instability issues related to the interconnecting layer. In addition to the optimization of perovskite-based tandem devices, encapsulation also plays a crucial role in improving stability against environmental stressors. Studies based on improving the stability of perovskite-based tandems are still in the early stage. However, with a deeper understanding of the stability of perovskite sub-cells and the interconnecting layer, the commercialization of perovskite-based tandems, especially perovskite/silicon tandem devices, is promising to be achieved in the near future.

Halogen-halogen Bonds Enable Improved Long-Term Operational Stability of Mixed-Halide Perovskite Photovoltaics

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Stabilizing wide-bandgap halide perovskites through hydrogen bonding

Halogenated Hole Selective Contact Enhances Interfacial Weak Bonding of Perovskite Solar Cells

Abnormal Synergetic Effect of Organic and Halide Ions on the Stability and Optoelectronic Properties of a Mixed Perovskite via In Situ Characterizations

Halide Remixing Under Device Operation Imparts Stability on Mixed‐Cation Mixed‐Halide Perovskite Solar Cells

Suppressing halide phase segregation in wide-bandgap perovskite film by co-doping strategy for high-performance and stable perovskite solar cells

Halogen Bonding in Perovskite Solar Cells: A New Tool for Improving Solar Energy Conversion

Downward Homogenized Crystallization for Inverted Wide‐Bandgap Mixed‐Halide Perovskite Solar Cells with 21% Efficiency and Suppressed Photo‐Induced Halide Segregation

Substantial Improvement of Operating Stability by Strengthening Metal‐Halogen Bonds in Halide Perovskites

Freezing Halide Segregation Under Intense Light for Photostable Perovskite/Silicon Tandem Solar Cells

Suppressed phase separation of mixed-halide perovskites confined in endotaxial matrices

Suppression of phase segregation in wide-bandgap perovskites with thiocyanate ions for perovskite/organic tandems with 25.06% efficiency

Suppressing Halide Segregation via Pyridine‐Derivative Isomers Enables Efficient 1.68‐eV Bandgap Perovskite Solar Cells

Mitigating lattice strain and phase segregation of mixed-halide perovskite films via dual chloride additive strategy toward highly efficient and stable perovskite solar cells

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation towards High‐Performance Inverted Perovskite Solar Cells and Modules

Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells

Chemical Synergic Stabilization of High Br‐Content Mixed‐Halide Wide‐Bandgap Perovskites for Durable Multi‐Terminal Tandem Solar Cells with Minimized Pb Leakage

Supramolecular bridging strategy enables high performance and stable organic–inorganic halide perovskite solar cells

Improved Performance and Stability of Perovskite Solar Modules by Regulating Interfacial Ion Diffusion with Nonionic Cross‐Linked 1D Lead‐Iodide

Strategies to Improve the Stability of Perovskite-based Tandem Solar Cells