Abstract:The effect of shear stress on strain development and pore water accumulation resulting from principal stress rotation tests on intact Hangzhou soft clay using a Zhejiang University hollow cylinder apparatus (ZJU-HCA) is reported. Different types of tests were designated, including a shearing test along the fixed principal stress direction, a pure rotation test, and both clockwise and anti-clockwise rotation tests. The mean principal stress was kept constant in all tests. The intermediate principal stress coefficient (b) was set to 0.5. The pore pressure coefficient, deduced using a double yield surface theory, revealed that the volume yield surface function was not affected by the rotation of the principal stress axes. The pore water pressure in the fixed principal stress direction test and in the pure rotation test was shown to be mainly controlled by the shear stress level. As the results revealed that the anticlockwise rotation would have a higher effect on pore water pressure than clockwise rotation, the pore water pressure generated in the clockwise rotation test was relatively small. Because b was set to 0.5, the radial strain was very small. The development of the axial strain was symmetrical to the circumferential strain, which coincided with the horizontal symmetry of the axial stress and circumferential stress. Both the shear stress level and rotation angle have a pronounced effect on strain development. When soil subjected to pure principal stress rotation under the conditions of high stress levels, large strains would be expected and any underestimation will lead to insecurity. If the specimen experienced a preceding rotation, its influence on the strain development in the subsequent rotation was significant. The variation of octahedral shear stiffness G(oct) with rotation angle also demonstrated the deterioration of the preceding rotation in the following rotation.

Stress Path Dependent Small Strain Stiffness of Shanghai Clay

Influence Of Stress Path On Secant Modulus Of Soft Saturated Clay

Experimental study on stiffness change of saturated soft clay with different degrees of consolidation under cyclic loading

Impact of Shear Stress on Strain and Pore Water Pressure Behavior of Intact Soft Clay under Principal Stress Rotation

Stress path triaxial tests onK0-consolidated saturated soft clay

Experimental Study on Degradation of Stiffness of Saturated Soft Clay under Undrained Cyclic Loading

Stress–strain Response of Soft Clay to Traffic Loading

Preliminary Study on Small-Strain Triaxial Testing Method for Soft Shanghai Clays

Intact soft clay’s critical response to dynamic stress paths on different combinations of principal stress orientation

Study on dynamic stress-strain relationship of soft clay considering degradation of stiffness under cyclic loading

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

Cyclic Behavior of Saturated Soft Clay under Stress Path with Bidirectional Shear Stresses

Deformation and Strength Characteristics of Structured Clay under Different Stress Paths

Constitutive modeling of anisotropic small-strain stiffness behavior of Shanghai soft clay

Effects of loading history on small-strain shear modulus of saturated clays

Influences of Stress Magnitude and Loading Frequency on Cyclic Behavior of K0-consolidated Marine Clay Involving Principal Stress Rotation

Stress Dilatancy of Natural Soft Clay under an Undrained Creep Condition

Effect of Anisotropic Consolidation Stress Paths on the Undrained Shear Behavior of Reconstituted Wenzhou Clay

Monotonic and Cyclic Characteristics of K0-Consolidated Saturated Soft Clay under a Stress Path Involving a Variable Confining Pressure

Soil Disturbance Evaluation of Soft Clay Based on Stress-Normalized Small-Strain Stiffness