Abstract:Background: Upper-limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. The design of exoskeleton mechanisms plays a key role to improve human-robot interface in the upper-limb movements under passive and active rehabilitation training. Objective: This paper proposes a novel of the 7-DOF (RR-RR-PRR) under-actuated exoskeleton mechanism based on the characteristics of the upper-limb movements in both of active and passive training. This aim of the proposed work is to improve human-robot interface in rehabilitation training with robots. Methods: Firstly, the characteristics of active and passive movement training are analyzed depending on the human upper-limb model. Then, a novel 7-DOF (RR-RR-PRR) exoskeleton mechanism is proposed based on the analyzed characteristics. After that, kinematical performances of the proposed exoskeleton are analyzed on the workspace, manipulability and manipulability ellipsoid by compared with the common exoskeleton configuration of the 7 DOFs (RRR-R-PRR) mechanism. In the end, the prototype is manufactured and tested by undergoing the experiments of single-joint passive movement training and multi-joint active movement training. The human-robot interface of the proposed exoskeleton is demonstrated by root mean square error, Pearson correlation coefficient, and the time-delay difference. Results: The results of the kinematical performance show that the effective workspace and the flexibility of the exoskeleton with the proposed configuration are increased by 10.44% and 1.7%. In the single-joint passive movement training experiment, the root mean square errors are 6.986, 7.568, 5.846, and Pearson correlation coefficients are 0.989, 0.984, 0.988 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.1%. In the multi-joint active movement training experiment, the root mean square errors are 9.312 and 7.677, and Pearson correlation coefficients are 0.906 and 0.968 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.28%. Conclusions: The proposed 7 DOFs exoskeleton mechanism shows uniformity with that of the common exoskeleton on the same rehabilitation trajectory which is effective to improve human-robot interface under passive and active rehabilitation training.

Optimizing Method of Mechanism Angle of Upper Limb Rehabilitation Robot at Glenohumeral Joint

Optimization of the Rotational Asymmetric Parallel Mechanism for Hip Rehabilitation With Force Transmission Factors

An Eight-Degree-of-freedom Upper Extremity Exoskeleton Rehabilitation Robot: Design, Optimization, and Validation

Design, optimization, and analysis of a human-machine compatibility upper extremity exoskeleton rehabilitation robot

Mechanism Design and Performance Analysis of a Wearable Hand Rehabilitation Robot

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Configuration Design of an Upper Limb Rehabilitation Robot with a Generalized Shoulder Joint

Upper limb exoskeleton rehabilitation robot inverse kinematics modeling and solution method based on multi-objective optimization

Glenohumeral joint trajectory tracking for improving the shoulder compliance of the upper limb rehabilitation robot

Mechanical Design and Trajectory Planning of a Lower Limb Rehabilitation Robot with a Variable Workspace

A Novel Multi-Dof Exoskeleton Robot for Upper Limb Rehabilitation

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

Design and analysis of shoulder joint exoskeleton rehabilitation mechanism based on gear and rack transmission

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

MECHANICAL STRUCTURE IMPROVEMENT OF AN UPPER LIMB REHABILITATION ROBOT: BASED ON AN EQUIVALENT KINEMATIC MODEL

Design and Analysis of a Multi-Joint Lower Limbs Rehabilitation Robot

Design and kinematical performance analysis of the 7-DOF upper-limb exoskeleton toward improving human-robot interface in active and passive movement training

Optimizing shoulder elevation assist rate in exoskeletal rehabilitation based on muscular activity indices: a clinical feasibility study

Optimal Design for Kinematics Parameter of Medical Robot

An Upper Limb Exoskeleton Motion Generation Algorithm Based on Separating Shoulder and Arm Motion

Rotation Angle Control Strategy for the Hip Joint of an Exoskeleton Robot Assisted by Paraplegic Patients Considering Time-Varying Inertia