Abstract:Performance of a conventional phase detector implemented using analog circuitry is affected by, among other factors, the parameter value drifting of the analog components with environment (e.g., temperature) and time (i.e., aging). It is also adversely impacted by electromagnetic interferences likely existing in the analog circuits when the detector operates in a high frequency range. More importantly, such a detector is inflexible to compensate various nonlinear characteristics of sensors and is very difficult to realize sophisticated signal processing strategies desired for practical applications. To address issues like these, we have developed a digital system approach that uses the zero-crossing algorithm for phase detection. The phase detection limit and dynamic phase response of the system were assessed using surface acoustic wave (SAW) sensors. Our preliminary evaluation involved AlN dual-mode differential sensors, which were fabricated on an AlN(0001)/Al2O3(11 2 ¯ 0) thin film structure, with the SAW and shear horizontal SAW (SH-SAW) operating at approximately 243 MHz and 256 MHz, respectively. Due to the hardware constraints, the digital phase processing was carried out in an off-line fashion. Our baseline experiments without sensor indicate that the system can achieve a lower level of phase noise with the standard deviation being about 0.005°. Experiments with the differential sensors running in the SAW and SH-SAW modes exhibit that the system can reach a phase detection limit of 0.02°. The differential system showed small temperature coefficient at ppm level measured by varying the sensor temperature using a thermal control oven. Finally, our use of the system in measuring the response of the SH-SAW sensor to sodium chloride (NaCl) solution conductivity shows that the system is capable of performing microanalysis of liquid properties. We conclude that a real-time fully digital phase detection system can be practically achieved.

An Algorithm for Solving the Phase Ambiguity Problem of SAW Delay-Line Sensor Systems.

Dual-Frequency Interrogation and Hierarchical Evaluation Scheme for SAW Reflective Delay-Line Sensors

Novel Method of Improving Detection Precision of SAW Sensor

Comparative analysis of mid-spatial frequency errors measurement using multiple phase retrieval algorithms

Saw Reflective Delay-Line Sensors Only Using Two Reflectors

Solving Phase Ambiguity in Interferometric Displacement Measurement with Millimeter-Wave FMCW Radar Sensors

Algorithm of Solving Interferometer Phase Difference Ambiguity by Airborne Single Position

A Novel Phase Evaluation Method for Range Detection by Hybrid SAW Sensors

Digital phase detection approach and its application for AlN dual-mode differential surface acoustic wave sensing

2-D Direction Finding Based On Signal Phase Matching Principle Using An Acoustic Vector-Sensor

Maximum Measurement Range And Accuracy Of Saw Reflective Delay Line Sensors

Phase drift and noise suppression method based on SEE-SGMD-PCC in a distributed acoustic sensor

Phase drift and noise suppression method based on SEE-SGMD-PCC in Distributed Acoustic Sensor

A Multi-Frequency Phase Difference Estimation Algorithm with Time-Frequency Analysis

A Dual-Frequency Phase Ambiguity Resolution Method for FMCW Radar High-Accuracy Ranging

Noise Mitigation for High-Sensitivity Phase Estimation Based on Weak Measurements

Simple Accurate Model-Based Phase Diversity Phase Retrieval Algorithm for Wavefront Sensing in High-Resolution Optical Imaging Systems.

Signal-and-Kernel Phase Noise Compensation Method for Distributed Acoustic Sensors

Estimation Of Doa And Phase Error Using A Partly Calibrated Sensor Array With Arbitrary Geometry

Multi-surface phase-shifting algorithm using the window function fitted by the nonlinear least squares method

A FEM Simulation Approach for Multilayered SAW Delay Line Devices