Abstract:Long-term repetition frequency stabilization of passively mode-locked (ML) fiber lasers using high-frequency harmonic synchronization is investigated. First, the standard cavity length controlling-based stabilization scheme is studied mathematically, and its disadvantages in high-frequency harmonic synchronization are analyzed. Theoretical studies are then carried out to prove that by modulating the pump power of lasers, the disadvantages can be overcome, and high-stability stabilization with low noises can thus be achieved. Based on the studies, an improved frequency stabilization scheme for passively ML fiber lasers is proposed. Its performances are evaluated by synchronizing a high-frequency harmonic of an ML laser with a 3.035-GHz reference microwave signal. Results show that the residual phase noise for the stabilization (synchronization) reaches around -100 dBc/Hz (-120 dBc/Hz) at 3-Hz (10 KHz) offset frequency, which results in 14.9 fs (21.2 fs) timing jitter integrated from 1 Hz to 0.1 MHz (1 MHz). The long-term (2 h) phase drift is less than 12 fs for in-loop measurement. For out-of-loop measurement, the drift is ~74 fs, while the measurement setup itself brings a drift of ~55 fs. The research provides deep studies for frequency stabilization of passively ML fiber lasers and can benefit their applications in various areas.

Passive repetition-rate stabilization for a mode-locked fiber laser by electro-optic modulation

Long-Term Repetition Frequency Stabilization of Passively Mode-Locked Fiber Lasers Using High-Frequency Harmonic Synchronization

High Repetition Rate Passively Mode-Locked Fiber Laser with A Composite Cavity Structure for Repetition Rate Control

Hybrid Mode-Locked Er-fiber Oscillator with a Wide Repetition Rate Stabilization Range

Experimental study on stable 10-GHz actively mode-locked fiber ring laser

Large Scale Optical Comb Frequencies Stabilization by Using an Intro-Cavity Electro-Optic Polarization Modulator

Passive Harmonically Mode-Locked Erbium-Doped Fiber Laser With Scalable Repetition Rate Up To 1.2 Ghz

Actively Mode-Locked Stabilized Fiber Lasers Based on Highly Nonlinear PCF

Stabilizing actively mode-locked fiber ring laser by suppressing the phase noise

Long-Term Stabilization of an Actively Mode-Locked Er-Doped Fiber-Ring Laser via Dynamic Intracavity Loss Feedback

Optically Stabilized Erbium Fiber Frequency Comb with Hybrid Mode-Locking and A Broad Tunable Range of Repetition Rate

High-Repetition-Rate Real-Time Automatic Mode-Locked Fibre Laser Enabled by a Pre-Stretch Technique

Long-Term Stabilization Of Mode-Locked Er-Fiber Lasers With 1.2 Fs Timing Jitter

Laser Frequency Stabilization Using Folded Cavity and Mirror Reflectivity Tuning

In-situ aligned all-polarization-maintaining Er-doped fiber laser mode-locked by a nonlinear amplifying loop mirror

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Electro-Optic Modulator with Ultra-Low Residual Amplitude Modulation for Frequency Modulation and Laser Stabilization

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

313 Mhz Repetition Rate Mode-Locked Yb: Fiber Laser with Phase-Biased Nonlinear Amplifying Loop Mirror

High Repetition Frequency Spatiotemporal Mode-Locked Fiber Laser Based on Cavity Induced Modulation Instability

Optical Comb Frequency-Controlled by Rotating Polarization State