Abstract:<p>Long-span bridges are susceptible to vortex-induced vibration (VIV), which affects the serviceability and safety of bridges when the vibration amplitude is too large and lasts for a long time. Traditional contact-type sensing technologies (i.e., accelerometers and linear variable differential transformer) are inconvenient and dangerous to be installed on long-span bridges for monitoring VIV events. To address this limitation, this article focuses on the VIV measurement of a long-span suspension bridge through noncontact sensing strategies. The contribution of this article lies in (1) noncontact sensing technologies including microwave radar, optical camera and video equipment were employed to measure multiple-point displacements of the studied bridge under VIV events; (2) dynamic properties of the bridge (i.e., natural frequency, damping ratio, mode shapes) and characteristics of the VIV event (i.e., single-mode vibration and dominant vibration mode switch) were identified by analyzing monitoring data; (3) an early warning framework for VIV event of long-span suspension bridges was proposed based on monitored dynamic responses and wind fields; specifically, two indicators, the dominant vibration frequency and the similarity between bridge shape and vibration mode shape, were proposed to identify the VIV event, and then the root mean square (RMS) of measured response was further calculated to determine whether there is a need to trigger the warning system or not. The proposed noncontact VIV measurement strategy has the advantage of rapid measurement of vibration magnitude, rapid identification of dynamic properties of the studied bridge and characteristics of the VIV event, which are helpful for the government and bridge owners to make decisions on vibration mitigation measures and to avoid safety issues.</p>

A Method of Acquiring Vibration Mode of Bridge Based on MIMO Radar

Method for improving MIMO radar angle resolution and target positioning method

Dynamic Deformation Measurement of Bridge Structure Based on GB-MIMO Radar

Multi-Monostatic Interferometric Radar for Bridge Monitoring

Simulation Analysis and Experimental Performance of A Radar Sensor Network for Distributed Bridge Monitoring

An Interferometric MIMO Radar for Bridge Monitoring

Radar-based multipoint displacement measurements of a 1200-m-long suspension bridge

Bridge modal identification method based on adaptive VMD-HT algorithm

Automatic modal parametric identification of bridge based on mobile sensing

Bridge Monitoring Strategies for Sustainable Development with Microwave Radar Interferometry

Transversal Displacement Detection of an Arched Bridge with a Multimonostatic Multiple-Input Multiple-Output Radar

Multi-point Vibration Measurement for Mode Identification of Bridge Structures using Video-based Motion Magnification

3-D Motion Imaging in a Multipath Coordinate Space Based on a TDM-MIMO Radar Sensor

Modal frequencies evaluation of a damaged bridge using RCVMD algorithm based on sensor dynamic responses

A Wireless Multifunctional Radar-Based Displacement Sensor for Structural Health Monitoring

Strategy for vertical deformation of railway bridge monitoring using polarimetric ground-based real aperture radar system

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

An Improved Vibration Parameter Estimation Method Applied for GB-MIMO Radar

A New Electronic Reconnaissance Technology for MIMO Radar

Vortex‐induced vibration measurement of a long‐span suspension bridge through noncontact sensing strategies