Abstract:Permanent-magnet synchronous machine drive with sine wave filter has features of low insulation stress and current harmonics. However, the filter can affect the current control of machine. Specifically, the increased axes cross-coupling degrades the response performance in the transient state, and the introduced resonant frequency oscillations can make the system unstable. To solve the issues, a complex-vector frequency-domain model of LC -equipped permanent-magnet synchronous machine drive is established in this article. Moreover, a quantitative index related to the symmetrical extent of double-sided frequency responses is introduced to evaluate the performance. A decoupling strategy based on the modified complex-vector controller is proposed and compared against conventional methods in terms of decoupling performance and parameter robustness based on the aforementioned evaluation index. Furthermore, an active damping method based on virtual impedance in parallel with the stator inductance is proposed to suppress the resonance. The quantified double-sided frequency-domain analysis is performed to illustrate the relationship between cross-coupling and system stability. Then, the systematic codesign procedure of decoupling controller and active damping link in the $z$ -domain is proposed. Finally, the experimental results show that the proposed scheme can improve the overall control performance in both transient and steady states.

Harmonic Suppression Method of High Speed PMSM Based on LC Filter and Adaptive Notch Filter

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

Resonant Frequency Deviation Analysis and Modified Notch Filter-Based Active Damping for SiC-Based PMSM Drive With Sine Wave Filter

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Strategy and Implementation of Harmonic-Reduced Synchronous Optimal PWM for High Speed PMSM

Standing-Wave Notch Filters with Improved Signal-Processing Response Considering Misalignment-Induced Harmonics in PMSM

Techniques to restrain harmonics of dual three-phase permanent magnet synchronous motor

Harmonic Suppression For Low Speed Sensorless Control of SPMSM Based on High Voltage Frequency Pulsating Signal Injection

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

A permanent magnet synchronous motor current suppression method based on resonant controllers

A Harmonic Current Suppression Method for Single-Phase PWM Rectifier Based on Feedback Linearization

Inverter Harmonic Suppression for Permanent Magnet Synchronous Machine Drives Based on Discontinuous SVPWM With Variable Switching Frequency

Analysis and Design of Passive Damping for LC-Equipped Permanent-Magnet Synchronous Machine Drive System

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Analysis and Design of a Novel Dual-Trap LCL Inverter Output Filter for HS-PMSM Drives

Adaptive Suppression Method for DC-link Voltage Offset in Three-Phase Four-Switch Inverter-Fed PMSM Drives

Reduction of the High-Speed Magnetically Suspended Centrifugal Compressor Harmonic Vibration Using Cascaded Phase-Shifted Notch Filters

A Novel Current Harmonic Suppression Method for HSPMSG Based on the Hybrid Rectifier