Investigation of the 3D-DIC testing method for composite shell in a deep-water high-pressure environment
Feng Luo,Xiangshao Kong,Zeyu Jin,Peng Wang,Hu Zhou,Zihan Zhu,Han Gao
DOI: https://doi.org/10.1016/j.tws.2023.110962
IF: 5.881
2023-07-07
Thin-Walled Structures
Abstract:The investigation of pressure-bearing capacity design for underwater structures is of significant importance. This study focuses specifically on composite shell structures and conducts stress–strain experiments using strain gauges and 3D-DIC (digital image correlation) in a high-pressure underwater environment of 15 MPa, utilizing a 3D-DIC underwater shield. Numerical simulations were carried out to verify the feasibility of the 3D-DIC testing system in underwater high-pressure environments, and a scientific underwater DIC testing method was proposed. The experimental and numerical results show that strain gauges have limited accuracy and random measurements due to the large size ratio (5.5) between the strain gauges and small structural components, and the high strain gradient (41.0 μɛ /mm) at the small structural components, with limited measurement points. On the other hand, the 3D-DIC system has a minimum measurement unit that is 0.12 times smaller than the size of small structural components, accurately measuring stress–strain results over a larger measurement area. Based on the DIC and numerical results, this study explores the mechanical performance of the composite shell structure. The stress and strain at the ribs were relatively small compared to the adjacent ribs, with a difference of 71.3 MPa in average Mises stress and 479.2 μɛ in average strain, effectively improving the structural anti-deformation ability and enhancing structural strength.
engineering, mechanical,mechanics, civil