A stable metallic 3D porous BPC2 as a universal anode material for Li, Na, and K ion batteries with high performance

Umer Younis,Imran Muhammad,Fizzah Qayyum,Yoshiyuki Kawazoe,Qiang Sun

DOI: https://doi.org/10.1039/d0ta10446a

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Materials composed of B, C, and P have been hotly pursued for batteries due to their low mass and high abundance.

What problem does this paper attempt to address?

A Stable Metallic 3d Porous Bpc2 As A Universal Anode Material For Li, Na, And K Ion Batteries With High Performance

Umer Younis,Muhammad Imran,Qayyum Fizzah,Yoshiyuki Kawazoe,Qiang Sun

DOI: https://doi.org/10.1039/d0ta10446a

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Materials composed of B, C, and P have been hotly pursued for batteries due to their low mass and high abundance. However, all the reported 3D B-C-P compounds at present are semiconductors with low electrical conductivity. Motivated by the semi-metallic character of a stable 2D-BPC2 sheet, we propose the first metallic porous 3D structure by using BPC2 nanoribbons as the basic building blocks. Based on ab initio calculations, we find that the 3D porous BPC2 is highly stable dynamically and thermally. The exhibited intrinsic metallicity together with the unique morphology makes this porous structure a universal anode material for Li, Na, and K-ion batteries with high theoretical capacities of 407.29, 407.29, and 305.48 mA h g(-1), low diffusion barriers of 0.29, 0.05, and 0.03 eV, and small volume expansions of 0.25, 1.15, and 1.55%, respectively. These intriguing findings should stimulate experimental effort on synthesizing a metallic 3D porous universal anode for multi-ion batteries.
Borophene-Based Three-Dimensional Porous Structures As Anode Materials for Alkali Metal-Ion Batteries with Ultrahigh Capacity

Imran Muhammad,Umer Younis,Huanhuan Xie,Adnan Ali Khan,Abdul Khaliq,Abdus Samad,Udo Schwingenschlogl,Qiang Sun

DOI: https://doi.org/10.1021/acs.chemmater.1c00517

IF: 10.508

2021-01-01

Chemistry of Materials

Abstract:The development of renewable and clean energy technologies requires the design of efficient materials for a wide variety of electrochemical applications. Using density functional theory, we design two metallic borophene-based three-dimensional (3D) porous structures (termed 3D-beta(12)-borophene and 3D-B7P2), which are found to be dynamically, thermally, and mechanically stable. The metallicity is dominated by the B p(x)-orbitals. The regularly distributed channels with low mass density and the intrinsic metallicity make 3D-beta(12)-borophene (3D-B7P2) promising for anode materials with ultrahigh capacities of 1653 (1363), 1239 (993), and 619 (681) mA h g(-1), low migration energy barriers of 0.55 (0.23), 0.25 (0.13), and 0.23(0.05) eV, small volume changes of 4.5 (6.3), 9.1 (6.9), and 7.4 (8.6)%, and appropriate average open-circuit voltages of 0.55 (0.52), 0.20 (0.31), and 0.27(0.24) V for Li-, Na-, and K-ions, respectively.
Metallic 3D porous borophosphene: A high rate-capacity and ultra-stable anode material for alkali metal ion batteries

He Lin,Guansuo Bai,Yafei Zhao,Yinan Zhang,Hangwei Wang,Rencheng Jin,Yong Huang,Xifei Li

DOI: https://doi.org/10.1016/j.vacuum.2022.111418

IF: 4

2022-11-01

Vacuum

Abstract:2D borophosphene (B2P2) is a promising next-generation metal ion battery (MIB) anode material, because of the high capacity and low open-circuit-voltage (OCV). Nevertheless, its electrochemical kinetics and cyclability are severely impeded by poor hopping dynamics, small pore size and low mechanical stiffness. In this work, using first principles computations, we design a novel porous 3D boron-based material (named 3D-B2P2) using the corresponding 2D borophosphene nanosheet as a building block. Our computational results show that the resulting 3D-B2P2 has highly dynamical, thermal and mechanical stability. Different from the semi-metallic borophosphene, 3D-B2P2 exhibits intrinsically high metallicity and low mass density (1.20 g/cm3). Its maximum Young's modulus (227.97 GPa) far exceeds that of borophosphere (145.53 GPa), showing a moderate mechanical stiffness. More importantly, due to the uniformly distributed pores and strong affinity towards metal ions, 3D-B2P2 anode achieves high reversible capacities of 691.30, 904.00 and 691.30 mA h/g, suitable OCVs of 1.00, 0.56 and 0.59 V, small volume changes of 2.25%, 6.00% and 8.11%, and low diffusion barriers of 0.25, 0.10 and 0.04 eV for lithium/sodium/potassium ion batteries. All the results indicate that 3D-B2P2 is an appealing anode material for advanced MIBs.

materials science, multidisciplinary,physics, applied
A Promising Alkali-Metal Ion Battery Anode Material: 2D Metallic Phosphorus Carbide (Β0-Pc)

Feng Li,Xiaobiao Liu,Junru Wang,Xiaoming Zhang,Bo Yang,Yuanyuan Qu,Mingwen Zhao

DOI: https://doi.org/10.1016/j.electacta.2017.11.101

IF: 6.6

2017-01-01

Electrochimica Acta

Abstract:Phosphorus compounds have been intensively investigated as potential negative electrode materials of alkali-metal (AM) ion batteries. However, the practical application is greatly hindered by the low conductivity due to the semiconducting nature of phosphorus and rapid structural degradation during cycling. Based on first-principles calculations, we proposed a new two-dimensional phosphorus carbide compound beta(0)-PC monolayer (PCM) as a promising anode material for AM (AM = Li, Na, and K) ion batteries. The PCM exhibits excellent electric conductivity and high charge/discharge rate due to the low energy barriers for the diffusion of AM atoms, 66 (Li), 39 (Na) and 36 meV (K). The storage capacities of AM ions are Li, Na and K atoms on PCM can be as high as 1247.1 mA h g(-1) (Li) 623.5 mA h g(-1)(Na), and 623.5 mA h g(-1)(K), respectively. More importantly, the PCM possesses ultrahigh stiffness (C-x = 186.08 J/m(2) (zigzag), C-y = 123.16 J/m(2) (armchair)) which can effectively avoid structure degradation during discharging/charging cycles. These interesting properties open avenue to overcome the drawbacks of phosphorus compounds in the AM ion batteries. (c) 2017 Elsevier Ltd. All rights reserved.
Bi/Bi3Se4 Nanoparticles Embedded in Hollow Porous Carbon Nanorod:High Rate Capability Material for Potassium-Ion Batteries

Zhisong Chen,Yuanji Wu,Xi Liu,Yiwei Zhang,Lichun Yang,Hongyan Li

DOI: https://doi.org/10.1016/j.jechem.2023.02.050

IF: 13.1

2023-01-01

Journal of Energy Chemistry

Abstract:Considering their superior theoretical capacity and low voltage plateau, bismuth (Bi)-based materials are being widely explored for application in potassium-ion batteries (PIBs). Unfortunately, pure Bi and Bi-based compounds suffer from severe electrochemical polarization, agglomeration, and dramatic volume fluctuations. To develop an advanced bismuth-based anode material with high reactivity and durability, in this work, the pyrolysis of Bi-based metal-organic frameworks and in-situ selenization techniques have been successfully used to produce a Bi-based composite with high capacity and unique structure, in which Bi/Bi3Se4 nanoparticles are encapsulated in carbon nanorods (Bi/Bi3Se4@CNR). Applied as the anode material of PIBs, the Bi/Bi3Se4@CNR displays fast potassium storage capability with 307.5 mA h g(-1) at 20 A g(-1) and durable cycle performance of 2000 cycles at 5 A g(-1). Notably, the Bi/ Bi3Se4@CNR also showed long cycle stability over 1600 cycles when working in a full cell system with potassium vanadate as the cathode material, which further demonstrates its promising potential in the field of PIBs. Additionally, the dual potassium storage mechanism of the Bi/Bi3Se4@CNR based on conversion and alloying reaction has also been revealed by in-situ X-ray diffraction. (C) 2023 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Three-Dimensional Porous H-Bc2n Based on BN Chains and Prismane C8 Units for Alkali Metal Ion Battery Anodes.

Lin Li,Xiaowei Li,Xiaoyu Li,Haotian Chen,Haidong Liu,Jin Chen,Yihe Zhang

DOI: https://doi.org/10.1021/acs.jpclett.1c03970

IF: 6.888

2022-01-01

The Journal of Physical Chemistry Letters

Abstract:Here, a new three-dimensional (3D) porous h-BC2N was designed via the assembly of prismane C8 and boron nitride chains as the candidates for alkali metal ion battery anodes. By systematic calculations, it is found that h-BC2N is both thermally and mechanically stable, even at a temperature as high as 1000 K. Li ions can migrate with multiple diffusion directions in h-BC2N, and the minimum diffusion barrier is only 0.10 eV lower than that of graphite. The theoretical specific capacity of the h-BC2N anode for Li is 549 mAh/g, which is higher than that reported for graphite. h-BC2N is also a promising anode for sodium (NIBs) and potassium ion batteries (KIBs) whose specific capacities are also large (549 mAh/g), and the energy barriers are 0.35 and 0.19 eV, respectively. Additionally, LIBs, NIBs, and KIBs exhibit voltage stability upon charging/discharging and good cycling stability. This theoretical exploration may open a new frontier in the search for more practical 3D porous structures as LIBs, NIBs, and KIBs anodes.
Recent progress and prospects of pitch-based carbon anodes for alkali metal-ion (Li/Na/K) batteries

Ye Jiang,Jiangmin Jiang,Ping Nie,Weijia Guo,Chao Geng,Zongfu Sun,Yi Fei,Yaxin Chen,Quanchao Zhuang,Zheng Xing,Zhicheng Ju,Huaiyu Shao

DOI: https://doi.org/10.1016/j.est.2023.108484

IF: 9.4

2023-11-01

Journal of Energy Storage

Abstract:Pitch-based carbon materials (PBCMs) are considered as one of the most promising anodes for alkali metal-ion (Li/Na/K) batteries due to their low cost, high carbon yield, resource availability, and environmental friendliness. However, PBCMs tend to be soft carbon with low layer spacing at high temperatures, resulting in undesirable reversible capacity and poor cycling stability during repeated charging and discharging cycles, which limit their applicability to energy storage systems. To date, many studies have focused on modifying PBCMs to achieve excellent alkali metal-ion storage performance. In this review, the operating mechanisms and corresponding microstructural characteristics of PBCMs used in alkali metal-ion batteries are discussed. Additionally, the design and optimization strategies of PBCMs are summarized and discussed in detail, including morphology adjustment, heteroatom doping, composite modification, pre-oxidation, and coating strategies. Furthermore, the current research status and development prospects of PBCMs are presented, including a perspective on future research directions.

energy & fuels
Bi-C Monolayer As a Promising 2D Anode Material for Li, Na, and K-ion Batteries

Awais Ghani,Shehzad Ahmed,Adil Murtaza,Imran Muhammad,Wasif ur Rehman,Chao Zhou,Wen Liang Zuo,Sen Yang

DOI: https://doi.org/10.1039/d2cp04712h

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:Electrode materials with high electrochemical efficiency are required for battery technology that can be used to store renewable energy. Bismuth (Bi) has shown great potential as an electrode material for metal ion batteries due to its large volumetric capacity and reasonable operating potential. However, the cycling performance deteriorates due to the drastic volume changes that occur during alloying and dealloying. Herein, we design a 2D Bi-C metal sheet using density functional theory and investigate the feasibility of this nanosheet for alkali metal ion batteries. The predicted metallic Bi-C monolayer (ML) are highly stable and show sound electrode performance. Moreover, alkali metal atoms exhibit high diffusivities on both sides (Bi and C sides) with low energy barriers of 0.252/0.201, 0.217/0.169, and 0.179/0.136 eV for Li, Na, and K ions, respectively. Furthermore, the Bi-C ML shows high theoretical storage capacities of (485 mA h g(-1)) for Li and Na and (364 mA h g(-1)) for K and low open-circuit voltage of 0.12, 0.24, and 0.32 V for Li, Na, and K ions, respectively. These exciting findings show that the predicted Bi-C ML can be used as an anode material for Li-, Na- and K-ion batteries.
A Stable Three‐Dimensional Porous Carbon As a High‐Performance Anode Material for Lithium, Sodium, and Potassium Ion Batteries

Umer Younis,Fizzah Qayyum,Imran Muhammad,Muhammad Yaseen,Qiang Sun

DOI: https://doi.org/10.1002/adts.202200230

2022-01-01

Advanced Theory and Simulations

Abstract:Extensive efforts are devoted to the design of new carbon materials with improved specific capacity for metal ion batteries (MIBs). One of the effective strategies for such material design is to change the structural unit. Recently, tetracene‐based nanoribbons have been synthesized (Chem. Eur. J. 2019, 25, 12074), which can be used as a basic building block to design a 3D porous TC60 as demonstrated in this work. Based on first‐principles calculations, it is found that the 3D‐TC60 shows high dynamical and thermal stability. Furthermore, the 3D‐TC60 with its unique porosity and various adsorption sites can work as a high‐performance anode material for Li, Na, and K‐ion batteries with high specific capacity of 706, 706, 466 mAhg−1; low diffusion barrier of 0.25, 0.11, 0.08 eV; small volume change of 0.88, 1.96, 2.94%; and average voltage of 0.19, 0.24, 0.50 V, respectively. These intriguing findings suggest the promising prospect of tetracene based materials for battery technology.
B4 Cluster-Based 3D Porous Topological Metal as an Anode Material for Both Li- and Na-Ion Batteries with a Superhigh Capacity

Huanhuan Xie,Yu Qie,Imran Muhammad,Qiang Sun

DOI: https://doi.org/10.1021/acs.jpclett.0c03709

2021-01-01

Abstract:The high rate performance of a battery requires the anode to be conductive not just ionically but also electronically. This criterion has significantly stimulated the study on 3D porous topological metals composed of nonmetal atoms with a light mass. Many carbon-based 3D topological metals for batteries have been reported, while similar work for 3D boron remains missing. Here, we report the first study of a 3D boron topological metal as an anode material for Li or Na ions. Based on systematic calculations, we found that the reported 3D topological metal H-boron composed of B-4 cluster shows a low mass density (0.91 g/cm(3)) with multiple adsorption sites for Li and Na ions due to the electron-deficient feature of boron, leading to an ultrahigh specific capacity of 930 mAh/g for Li and Na ions with a small migration barrier of 0.15 and 0.22 eV, respectively, and small volume changes of 0.6% and 9.8%. These intriguing features demonstrate that B-based 3D topological quantum porous materials are worthy of further study for batteries.
First principles theoretical of designing Sandwich-like Metallic BP4 Monolayer as Anode for Alkali Metal-ion Batteries

Zhifang Yang,Wenliang li,Jingping Zhang

DOI: https://doi.org/10.1088/1361-6528/ad7145

IF: 3.5

2024-08-24

Nanotechnology

Abstract:Phosphorene has been widely used as anode material for batteries. However, the huge volume change during charging and discharging process, the semiconductor properties, and the high open circuit voltage limit its application. Based on this, by introducing the electron-deficient boron atoms into blue phosphorene, we proposed a P-rich sandwich-like BP4 monolayer by density functional theory calculation and particle swarm optimization. The BP4 monolayer shows good thermodynamic and dynamic stability, as well as chemical stability in O2 atmosphere, mainly due to the strengthened P-P bond of the outer layer by the middle boron atoms adopting sp3 hybridization. According to the band structure, the BP4 monolayer shows metallic property, which is beneficial to electron conductivity. Furthermore, compared with blue phosphorene and black phosphorene, the P-rich BP4 monolayer shows higher theoretical capacity for Li, Na, and K of 1193.90, 1119.28, and 397.97 mA·h·g-1, respectively. The lattice constant of BP4 monolayer increases only 3.73 (Li), 2.52 (Na) after Li/Na fully adsorbed on the anode. More importantly, the wettability of BP4 monolayer in the electrolyte is comparable to that of graphene. These findings show that the stable sandwich-like BP4 monolayer has potential as a lightweight anode material.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Metallic Penta-BN2 Monolayer: A Novel Platform for Non-Lithium-ion Batteries with High Capacity and Splendid Cyclicity

Minrui Yang,Lei Chen,Fan Kong,Jiyuan Guo,Huabing Shu,Jun Dai

DOI: https://doi.org/10.1016/j.mssp.2022.106849

IF: 4.1

2022-01-01

Materials Science in Semiconductor Processing

Abstract:Investigating high-capacity anode materials for non-lithium-ion batteries (NLIBs) would further enhance the possibility of the human being free from fossil energy. By applying the first-principles calculation method based on density functional theory, in this work, the scientific feasibility of employing penta-BN2 monolayer as anode material for NLIBs (Na, K, Mg, and Ca-ion batteries) is systematically investigated. The results show that the penta-BN2 exhibits excellent thermodynamic stability and superior electrical conductivity, and its intrinsic metallic property is maintained after ionization. Remarkably, the calculated theoretical specific capacities of penta-BN2 monolayer are 690.23, 690.23, 1380.45, and 1380.45 mAh·g−1 for Na+, K+, Mg2+, and Ca2+, respectively, which are outstanding among most of the previously proposed candidate anode materials for NLIBs. In addition, the moderate open-circuit voltages of penta-BN2 make itself suitable for anode applications. More importantly, the splendid reversibility of penta-BN2 contributes to extremely low diffusion energy barriers for metal ions. These results suggest that the penta-BN2 monolayer has a promising application prospect as anode for NLIBs with high energy density and outstanding rate performance.
An Insoluble P-Type Organic Polymer Cathode with a 9,9′-Bicarbazole Core for Highly Stable Li/Na/K-based Dual-Ion Full Batteries

Kexin Fan,Huilin Ma,Wu Tang,Wenjun Li,Shan Jia,Jiahui Hu,Xinyu Liu,Yuanhe Zhang,Cong Fan

DOI: https://doi.org/10.1039/d4qi01364f

IF: 7.779

2024-01-01

Inorganic Chemistry Frontiers

Abstract:A p-type organic polymer cathode called poly[bicarbazole-alt-dihydrophenazine] (P(BCz4PZ)) is designed for dual-ion batteries (DIBs). P(BCz4PZ) can stably store PF6- anions above 3 V versus Li/Na/K-metal anodes, bringing in a theoretical specific capacity (CT) of similar to 155 mA h g-1. Meanwhile, P(BCz4PZ) can show high initial columbic efficiency values of 91%/87%/96% in Li/Na/K-based half cells. Consequently, the Li/Na/K-based dual-ion full batteries can be fabricated by using P(BCz4PZ) as the universal cathode without any pretreatments, as well as the low-cost graphite (C)/hard carbon (HC)/graphite (C) as the related anodes respectively. The three full batteries can deliver the peak discharge capacities of 115/122/122 mA h g-1cathode and the high average discharge voltages of 3.29/3.3/2.8 V, corresponding to the high energy densities of 193/185/140 W h kg-1 based on total mass (cathode + anode + electrolyte), respectively. Except for Li element, the electrodes in our three dual-ion full battery systems are composed of the cost-effective and readily accessible elements of C, H, N, P, F, Na and K. A p-type organic polymer P(BCz4PZ) with a PF6--storage mechanism is employed as a high-potential cathode for Li/Na/K-based dual-ion full batteries. The resulting batteries with carbon anodes show 193/185/140 W h kg-1 based on total mass.
Bipolar BINOL-PIM Cathode for High-Performance Aluminum Batteries

Wei Zhou,Shaobo Tu,Junjie Jin,Cong Yu,Xinbo Wang,Chao Zou,Wenhan Guo,Udo Schwingenschlögl,Husam N. Alshareef,Hu Chen

DOI: https://doi.org/10.1021/acsami.4c13169

IF: 9.5

2024-10-16

ACS Applied Materials & Interfaces

Abstract:Given the high abundance of aluminum in the Earth's crust, the development of aluminum-ion batteries can provide a cost-effective solution for large-scale energy storage. However, the key challenge in this field is to identify high-quality cathode materials that enable effective insertion/extraction of aluminum complex ions. In this regard, we present a strategy to prepare high-capacity, long-cycling aluminum-ion batteries aluminum-ion batteries (ALBs) cathode materials. High capacity was...

materials science, multidisciplinary,nanoscience & nanotechnology
Three-dimensional porous phosphorus-graphdiyne as a universal anode material for both K- and Ca-ion batteries with high performance

Imran Muhammad,Umer Younis,Wei Wu,Huanhuan Xie,Abdul Khaliq,Qiang Sun

DOI: https://doi.org/10.1016/j.jpowsour.2020.228876

IF: 9.2

2020-12-01

Journal of Power Sources

Abstract:Motivated by the recent synthesis of 2D boron-graphdiyne and P-doped graphdiyne, for the first time we report a 3D porous phosphorus-graphdiyne (termed 3D-PGDY) with an ultra-low mass density of 0.48 g cm−3, which is stable thermally and dynamically. Moreover, the unique bonding environment of sp-hybridizing provide multiple adsorption sites for K and Ca ions, and the uniformly distributed pores provide the channel for ion transport, exhibiting ultrahigh specific capacity of 1064.56 (2129.12 mAhg−1), low diffusion barriers of 0.1 (0.35 eV), the low open-circuit voltage of 0.27 (0.35 V), and small volume expansion of 2.43 (2.32%) for K (Ca) ion. These outstanding properties demonstrate that assembling graphdiyne into 3D porous structures is very promising for developing novel battery materials.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Design of Black Phosphorous Derivatives with Excellent Stability and Ion-Kinetics for Alkali Metal-Ion Battery

Liping Yang,Ting Shen,Yew Von Lim,Mei Er Pam,Lu Guo,Yumeng Shi,Hui Ying Yang

DOI: https://doi.org/10.1016/j.ensm.2020.11.025

IF: 20.4

2021-03-01

Energy Storage Materials

Abstract:Two-dimensional black phosphorus (2D BP) and its derivatives has recently attracted significant research attention on energy storage devices due to its extremely high electronic conductivity, anisotropic structural advantages and high specific capacity. Through in-depth research, the performance defects of BP-based devices are discovered, which is mainly due to the poor chemical stability of BP. In order to solve the above issues, by integrating the unique properties of foreign materials and the advantages of BP into a single hybrid hetero-structure, a variety of black phosphorus derivatives (BPDs) have been constructed as emerging types of multifunctional materials. With the rapid development of BPDs, a timely review on this topic is in demand to further extend the application of BPDs in alkali metal-ion battery (AMIBs), especially sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs), they are the new generation metal-ion batteries due to the abundance natural reserve and cost-effective merits of Na and K. Here, the design of BPDs with excellent stability/ion-kinetics and the progress of BPDs anodes for AMIBs are systematical reviewed, which are not only crucial for in-depth understanding of electrochemical energy storage mechanism but also to provide further insights and enabling rational design methodologies. Finally, the challenges of BPDs in the development of AMIBs are presented, hoping to provide some inspirations for the design and fabrication of advanced alkali metal energy storage systems.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Danfeng Zhang,Jiabin Ma,Chen Zhang,Ming Liu,Ke Yang,Yuhang Li,Xing Cheng,Ziqiang Wang,Huiqi Wang,Wei Lv,Yan-Bing He,Feiyu Kang

DOI: https://doi.org/10.1093/nsr/nwae219

IF: 20.6

2024-06-25

National Science Review

Abstract:Abstract The coupling of high-capacity cathodes and lithium metal anodes promises the next generation of high-energy-density batteries. However, the fast-structural degradations of the cathode and anode challenge their practical applications. Herein, we synthesize an electrolyte additive, tris(2,2,3,3,3-pentafluoropropyl) borane (TPFPB), for ultra-stable lithium (Li) metal||Ni-rich layered oxide batteries. It can be preferentially adsorbed on cathode surface to form a stable (B and F)-rich cathode electrolyte interface film, which greatly suppresses the electrolyte-cathode side reactions and improves the stability of cathode. In addition, the electrophilicity of B atoms in TPFPB enhances 30 times of the solubility of LiNO3 in ester electrolyte to significantly improve the stability of Li metal anode. Thus, the Li||Ni-rich layered oxides full batteries using TPFPB show high stability and ultralong cycle life (up to 1500 cycles), which also present excellent performance even under high voltage (4.8 V), high areal mass loading (30 mg cm−2) and wide temperature range (−30∼60°C). The Li||LiNi0.9Co0.05Mn0.05O2 (NCM90) pouch cell using TPFPB with a capacity of 3.1 Ah reaches a high energy density of 420 Wh kg−1 at 0.1 C and presents outstanding cycling performance.

multidisciplinary sciences
Rational Combination of Inverted-Pyramid Structured Nickel-based Prussian Blue with Porous 3D Carbon As High-Performance Sodium-Ion Batteries Cathode

Tiefeng Yuan,Xin Gao,Shifei Kang,Lifeng Cui

DOI: https://doi.org/10.1016/j.ces.2024.120669

IF: 4.7

2024-01-01

Chemical Engineering Science

Abstract:Metal based Prussian blue composite materials with heterogeneous structures possess substantial potential for enhancing both ionic and charge transfer processes, ultimately expediting electrochemical reaction kinetics for various battery devices. However, the limited bonding between carbon materials and Prussian blue analogues (PBAs) and the uncontrolled nucleation rate of metal component resulted in limited specific capacity and cyclic stability. Herein, we introduced a novel approach for the in-situ synthesis of Ni-PBA with an inverted-pyramid structure on a three-dimensional ultra-thin carbon frames (3DUC) substrate via a hydrothermal method. The inverted pyramid structure fits tightly with the 3DUC during nucleation to form a one-piece stable structure. This integration effectively curbs aggregation and hasty nucleation tendencies of NiPBA. Furthermore, the abundant voids and interconnected networks within the 3DUC structure significantly reduce ion diffusion path lengths, thereby lowering the Na diffusion barrier and enhancing the material's capacitance contribution rate. Consequently, this cathode material exhibits commendable initial capacity (125.2 mAh/g at 50 mA g(-1)) and exceptional long-term cycling stability (with a capacity retention of 89.06 % after 900 cycles at 50 mA g(-1)). These findings hold significant promise for advancing the commercial viability of metal-PBA based electrodes by rational heterogeneous structure design.
Bi@hollow carbon tube enabled high performance potassium metal batteries

Guangzeng Cheng,Shuai Liu,Yunxing Su,Xingjie Wang,Xurui Li,Jing Shi,Minghua Huang,Zhicheng Shi,Huanlei Wang

DOI: https://doi.org/10.1016/j.jallcom.2022.165329

IF: 6.2

2022-08-25

Journal of Alloys and Compounds

Abstract:Potassium (K) metal batteries are attractive alternatives beyond lithium-ion batteries because of the large abundance, high theoretical specific capacity and low electrochemical potential of the K metal. However, K metal anode have been restrained by the uncontrollable K dendrite growth. A high-activity K metal anodes achieved by confining K metal into a Bismuth compound hollow carbon tube (Bi@CNT) freestanding matrix is reported. The homogeneous K ionic flux and reduced local current density during plating/stripping processes are enabled by the high electronic transport in the Bi@CNT matrix. Moreover, the “K-philic” Bi in the Bi@CNT can induce the nucleation of K metal and induce K to uniformly distribute in the electrode during cycling. Therefore, the obtained Bi@CNT composite K anode shows more excellent electrochemical performance in electroplating/stripping, greatly improves the stability (500 h at 0.5 mA cm−2 - 0.5 mA h cm−2and a low overpotential of 53 mV), and provides more choices for the development of potassium metal batteries. Furthermore, K@Bi@CNT||PTCDA full batteries exhibit excellent electrochemical performance with good rate capability and long cycling stability (103.3 mA h g−1 after 150 cycle at 0.1 A g−1).

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Three‐Dimensional Porous Diboron Dinitride as a High‐Performance Anode Material for Sodium/Potassium‐Ion Batteries: A First Principles Study

Xun Lin,He Lin,Yong Huang

DOI: https://doi.org/10.1002/slct.202300719

2023-09-15

ChemistrySelect

Abstract:Motivated by the great success of 3D carbon materials and MXenes, design a novel porous 3D−B2N2 structure was designed by assembling the orthorhombic B2N2 monolayer into t‐C24 lattice. Its potential use as an anode material of sodium(SIBs)/potassium(PIBs) ion batteries was assessed using first principles calculations. The resulting 3D−B2N2 has excellent mechanical, dynamical and thermal stability with improved electrical conductivity. In addition, due to the low mass density, unique porous structure and strong adsorption energy, the 3D−B2N2 anode achieves high storage capacities of 599.90 (479.92) mA h/g, low averaged open circuit voltages of 0.13 (0.27) V, low diffusion barriers of 0.04 (0.008) eV, and small volume expansions of 0.96 % (2.63 %) for SIBs/PIBs. 2D boron nitride shows great promise in the photoelectric device, deep UV emitter and field effect transistor with good thermal stability, high mechanical robustness and chemical inertness; nonetheless, its inherently low electrical conductivity and small pore size have severely hindered the electrochemical kinetics and lead to a poor rate capability. Herein, we design a novel porous 3D−B2N2 structure by assembling the orthorhombic B2N2 monolayer into t‐C24 lattice and assesse its feasibility as the anode material of sodium(SIBs)/potassium(PIBs) ion batteries. The ab initio molecular dynamics (AIMD) simulation, Born‐Huang criteria, phonon spectrum and cohesive energy calculations confirms that the resulting 3D−B2N2 possesses excellent mechanical, thermal and dynamical stability. Different from the pristine h‐B2N2, an improved electrical conductivity is observed for 3D−B2N2 with a small band gap of 0.66 eV. Moreover, the low mass density, unique porous structure and strong adsorption energy make the 3D−B2N2 an outstanding electrode material for SIBs/PIBs with high storage capacities of 599.90 (479.92) mA h/g, low averaged open circuit voltages of 0.13 (0.27) V, low diffusion barriers of 0.04 (0.008) eV, and small volume expansions of 0.96 % (2.63 %). All the encouraging findings reveal that the 3D−B2N2 anode deserves further experimental investigation for SIBs/PIBs.

chemistry, multidisciplinary

A stable metallic 3D porous BPC<sub>2</sub> as a universal anode material for Li, Na, and K ion batteries with high performance

A Stable Metallic 3d Porous Bpc2 As A Universal Anode Material For Li, Na, And K Ion Batteries With High Performance

Borophene-Based Three-Dimensional Porous Structures As Anode Materials for Alkali Metal-Ion Batteries with Ultrahigh Capacity

Metallic 3D porous borophosphene: A high rate-capacity and ultra-stable anode material for alkali metal ion batteries

A Promising Alkali-Metal Ion Battery Anode Material: 2D Metallic Phosphorus Carbide (Β0-Pc)

Bi/Bi3Se4 Nanoparticles Embedded in Hollow Porous Carbon Nanorod:High Rate Capability Material for Potassium-Ion Batteries

Three-Dimensional Porous H-Bc2n Based on BN Chains and Prismane C8 Units for Alkali Metal Ion Battery Anodes.

Recent progress and prospects of pitch-based carbon anodes for alkali metal-ion (Li/Na/K) batteries

Bi-C Monolayer As a Promising 2D Anode Material for Li, Na, and K-ion Batteries

A Stable Three‐Dimensional Porous Carbon As a High‐Performance Anode Material for Lithium, Sodium, and Potassium Ion Batteries

B<sub>4</sub> Cluster-Based 3D Porous Topological Metal as an Anode Material for Both Li- and Na-Ion Batteries with a Superhigh Capacity

First principles theoretical of designing Sandwich-like Metallic BP4 Monolayer as Anode for Alkali Metal-ion Batteries

Metallic Penta-BN2 Monolayer: A Novel Platform for Non-Lithium-ion Batteries with High Capacity and Splendid Cyclicity

An Insoluble P-Type Organic Polymer Cathode with a 9,9′-Bicarbazole Core for Highly Stable Li/Na/K-based Dual-Ion Full Batteries

Bipolar BINOL-PIM Cathode for High-Performance Aluminum Batteries

Three-dimensional porous phosphorus-graphdiyne as a universal anode material for both K- and Ca-ion batteries with high performance

Design of Black Phosphorous Derivatives with Excellent Stability and Ion-Kinetics for Alkali Metal-Ion Battery

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Rational Combination of Inverted-Pyramid Structured Nickel-based Prussian Blue with Porous 3D Carbon As High-Performance Sodium-Ion Batteries Cathode

Bi@hollow carbon tube enabled high performance potassium metal batteries

Three‐Dimensional Porous Diboron Dinitride as a High‐Performance Anode Material for Sodium/Potassium‐Ion Batteries: A First Principles Study